TRENDnet Switch TE100S24G User Manual

Fiber Converters  
Quick Installation Guide (1)  
Fiber Converters /10.30.2012  
 
2. Hardware Installation  
Installing Two Stand Alone Fiber Converters Together  
1. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet  
port on your switch (e.g TE100-S24g).  
2. Connect the fiber cable to the fiber converters.  
3. Connect the power adapter to the fiber converter.  
Note:  
For the TFC-110MM/MST/MSC/110S15/S15i/S30/S30i/S60/S60i/S100, the TX and RX cables  
must be reversed on the opposite fiber connection  
TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected to a switch with  
Multi-Mode SC-type fiber connection (e.g TEG-424WS with fiber modules) to extend the distance  
up to 15km with Single-Mode fiber.  
Cabling  
• Multi-Mode Fiber Optic Cable: TFC-110MSC, TFC-110MST, TFC-110MM  
• Single-Mode Fiber Optic Cable: TFC-110S15, TFC-110S30, TFC-110S60, TFC-110S100,  
TFC-110S15i, TFC-110S30i, TFC-110S60i  
• Single Strand Fiber Optic Cable: TFC-110S20D3, TFC-110S20D5, TFC-110S20D3i,  
TFC-110S20D5i, TFC-110S40D3i, TFC-110S40D5i  
 
2
Installing Fiber Converter in a Chassis  
1. Unscrew the bay cover from the desired bay on the chassis.  
2. Unfasten the thumbscrew and remove the fiber converter from the metal casing.  
3. Slide the fiber converter into an available slot and fasten the thumbscrew.  
 
3
3. LEDs and DIP switches  
LED  
Color  
Sequence Function  
TFC-110MM/MST/MSC/  
TFC-110S15i/30i/60i  
TFC-15MS100  
110S15/S30/S60/S100/20D3/  
S20D5/20D3i/20D5i/40D3i/  
40D5i  
Device powered On  
Device powered Off  
Green  
N/A  
Solid  
Off  
PWR  
(Power)  
100/200Mbps (Half/Full Duplex) Connection  
10/20Mbps (Half/Full Duplex) Connection  
Connection on TX end in full duplex mode  
Green  
Solid  
N/A  
100M  
N/A  
Off  
N/A  
Green  
Solid  
Blinking  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
FDX / COL  
(TX)  
Green  
N/A  
Data collision is detected  
Connection on TX end in half duplex mode  
Connection on Fiber end in full duplex mode  
Data collision is detected  
Off  
Green  
Green  
N/A  
Solid  
Blinking  
Off  
FDX / COL  
(FX)  
Connection on Fiber end in half duplex mode  
100/200Mbps (Half/Full Duplex)  
or 10/20Mbps (Half/Full Duplex) Connection  
Green  
Green  
Solid  
N/A  
LINK/ACT  
(TX)  
100/200Mbps (Half/Full Duplex)  
or 10/20Mbps Data Transmitting/Receiving  
Blinking  
N/A  
N/A  
Off  
The link is disconnected  
N/A  
100/200Mbps (Half/Full Duplex) Connection  
Green  
Solid  
Blinking  
Off  
N/A  
LINK/ACT  
(FX)  
100/200Mbps (Half/Full Duplex) Data Transmitting/Receiving  
The link is disconnected  
Green  
N/A  
N/A  
N/A  
100/200Mbps (Half/Full Duplex)  
Connection  
Green  
Green  
N/A  
Solid  
N/A  
LINK/ACT  
100/200Mbps (Half/Full Duplex)  
Data Transmitting/Receiving  
Blinking  
N/A  
N/A  
The link is disconnected  
N/A  
Red  
N/A  
Off  
N/A  
N/A  
N/A  
N/A  
The TX link is disconnected  
Solid  
Off  
FAIL (TX)  
FAIL(FX)  
N/A  
N/A  
N/A  
The TX link is connected  
The Fiber link is disconnected  
The Fiber link is connected  
N/A  
N/A  
N/A  
Red  
Solid  
Off  
N/A  
 
4
Switch  
Action  
Function  
TFC-110MM/MST/MSC/  
110S15/S30/S60/S100  
TFC-110S15i/30i/60i/20D3i/20D5i/40D3i/40D5i  
Half-Duplex  
Full-Duplex  
N/A  
Fiber Half-Duplex  
Fiber Full-Duplex  
TX Forced Mode  
TX Auto-Negotiation  
On  
1
2
3
4
5
6
Off  
On  
Off  
N/A  
On  
Off  
On  
Off  
N/A  
TX 10M  
N/A  
TX 100M  
TX Half-Duplex  
TX Full Duplex  
N/A  
N/A  
On  
Off  
On  
Off  
N/A  
N/A  
N/A  
N/A  
LLR Enable  
LLR Disable  
LLR Enable  
LLR Disable  
Note:  
After changing the DIP Switch settings, power cycle the Fiber Converter.  
LLCF stands for Link Loss Carry Forward. When LLCF is enabled, the ports do not transmit a link  
signal until they receive a link signal from the opposite port. Link loss is “carried forward” to the  
managed switch or hub that is sending the link. LLCF can be used for either the copper or fiber  
ports.  
LLR stands for Link Loss Return. When LLR is enabled, the fiber port’s transmitter shuts down if  
its receiver fails to detect a valid receive link. If one of the optical conductors is bad, the card with  
LLR enabled will return a no link condition to its link partner. LLR is used to detect link problems  
only on the fiber port. If LLR is enabled on one Fiber converter, the opposite Fiber converter must  
have LLR disabled.  
 
5
4. Technical Specifications  
Power Budget  
Optical Output Power Optical Input Power  
Model Name  
Media  
Connectors  
Wavelength  
Power Distance  
Budget  
(dBm)  
(dBm)  
(dBm)  
Min.  
Max.  
Min.  
(Sensitivity)  
Max.  
Transmit  
(TX)  
Receive  
(RX)  
TFC-110MSC  
MMF  
(Multi-mode  
fiber)  
RJ-45/SC (Duplex)  
1300nm  
-19  
14  
-32  
-14  
13  
13  
2km  
TFC-110MST  
TFC-110MM  
MMF  
MMF  
RJ-45/ST (Duplex)  
1300nm  
1300nm  
-19  
14  
14  
-32  
-14  
2km  
-23.5  
-31  
-33.5 (typ.) 7.5  
2km  
RJ-45/MT- RJ  
(Duplex)  
TFC-110S15  
SMF  
RJ-45/SC (Duplex)  
1310nm  
-20  
0
-32  
0
12  
15km  
(Single-mode  
fiber)  
TFC-110S30  
TFC-110S60  
SMF  
SMF  
RJ-45/SC (Duplex)  
RJ-45/SC (Duplex)  
RJ-45/SC (Duplex)  
1310nm  
1310nm  
1550nm  
-15  
-5  
-8  
0
-34  
-35  
-35  
0
0
0
19  
30  
30  
30km  
60km  
100km  
TFC-110S100 SMF  
-5  
0
TFC-110S15i  
TFC-110S30i  
TFC-110S60i  
SMF  
SMF  
SMF  
RJ-45/SC (Duplex)  
1310nm  
1310nm  
1310nm  
-20  
-15  
-5  
0
-32  
-34  
-35  
-31  
-31  
-31  
0
0
0
0
0
0
12  
19  
30  
17  
17  
17  
15km  
30km  
60km  
20km  
20km  
20km  
RJ-45/SC (Duplex)  
-8  
0
RJ-45/SC (Duplex)  
TFC-110S20D3 SMF  
RJ-45/SC (Simplex) 1310nm  
1550nm -14  
-8  
-8  
-8  
1550nm  
RJ-45/SC (Simplex) 1310nm  
RJ-45/SC (Simplex)  
1310nm -14  
RJ-45/SC (Simplex)  
TFC-110S20D5 SMF  
TFC-110S20D3i SMF  
1550nm -14  
TFC-110S20D5i SMF  
TFC-110S40D3i SMF  
TFC-110S40D5i SMF  
1550nm  
1310nm -14  
1550nm -8  
1310nm -8  
-8  
-3  
-31  
-34  
0
17  
26  
20km  
40km  
RJ-45/SC (Simplex) 1310nm  
-3  
RJ-45/SC (Simplex) 1550nm  
SC (Duplex)  
-3  
-14  
0
-34  
-31  
-32  
-3  
0
26  
7.5  
12  
40km  
2km  
MMF (1)  
SMF (2)  
1300nm  
1310nm  
-23.5  
-20  
TFC-15MS100  
SC (Duplex)  
0
15km  
 
6
TFC-110MSC,ꢀTFC-110MST,ꢀTFC-110MM,ꢀTFC-15MS100,ꢀTFC-110S15,ꢀ  
TFC-110S30,ꢀTFC-110S60,ꢀTFC-110S100,ꢀTFC-110S15i,ꢀꢀTFC-110S30i,ꢀꢀ  
TFC-110S60i,ꢀꢀTFC-110S20D3,ꢀTFC-110S20D5,ꢀTFC-110S20D3i,ꢀ  
TFC-110S20D5i,ꢀTFC-110S40D3i,ꢀTFC-110S40D5i,ꢀꢀTFC-15MS100  
 
GPL/LGPL General Information  
This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public  
License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject  
to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and  
LGPL are included in the product CD-ROM.  
years from the product shipping date.  
You could also request the source codes by contacting TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Informations générales GPL/LGPL  
Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General Public  
License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence publique générale limitée  
GNU). Ces codes sont distribués SANS GARANTIE et sont sujets aux droits d'auteurs des programmeurs. TRENDnet ne fournit pas  
d'assistance technique pour ces codes. Les détails concernant les GPL et LGPL GNU sont repris sur le CD-ROM du produit.  
spécifiques de chaque licence.  
Les codes source sont disponibles au téléchargement sur le site Internet de TRENDnet web site  
Vous pouvez également demander les codes source en contactant TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Allgemeine Informationen zu GPL/LGPL  
„Linux „mtd“ (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in Linux Version 2.4.0-test 3  
haben durch den Erwerb dieses Produktes keinerlei Gewährleistungsansprüche gegen die Berechtigten an der oben genannten  
Software erworben; weil diese die Software kostenfrei lizenzieren gewähren sie keine Haftung gemäß unten abgedruckten  
Lizenzbedingungen. Die Software darf von jedermann im Quell-und Objektcode unter Beachtung der Lizenzbedingungen der GNU  
General Public License Version 2, und GNU Lesser General Public License (LGPL) vervielfältigt, verbreitet und verarbeitet werden.  
Die Lizenz ist unten im englischsprachigen Originalwortlaut wiedergegeben. Eine nichtoffizielle Übersetzung in die deutsche Sprache  
auf der mitgelieferten CD-ROM.  
Downloads verfügen können Sie bei TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501 -U.S.A -, Tel.: +1-310-961-5500, Fax: +1-310-961-5511 die Software anfordern.  
Información general sobre la GPL/LGPL  
Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la Licencia  
pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son distribuidos SIN  
GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece servicio técnico  
para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del producto.  
específicas de cada licencia.  
 
Los códigos fuentes están disponibles para ser descargados del sitio Web de TRENDnet  
También puede solicitar el código fuente llamando a TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Общая информация о лицензиях GPL/LGPL  
В состав данного продукта TRENDnet входит бесплатное программное обеспечение, написанное сторонними разработчиками.  
Это ПО распространяется на условиях лицензий GNU General Public License ("GPL") или GNU Lesser General Public License  
("LGPL"). Программы распространяются БЕЗ ГАРАНТИИ и охраняются авторскими правами разработчиков. TRENDnet не  
оказывает техническую поддержку этого программного обеспечения. Подробное описание лицензий GNU GPL и LGPL можно  
найти на компакт-диске, прилагаемом к продукту.  
В пунктах (http://www.gnu.org/licenses/gpl.txt) и (http://www.gnu.org/licenses/lgpl.txt) изложены конкретные условия каждой из  
лицензий.  
Исходный код программ доступен для загрузки с веб-сайта TRENDnet (http://trendnet.com/downloads/list_gpl.asp) в течение, как  
минимум, трех лет со дня поставки продукта.  
Кроме того, исходный код можно запросить по адресу TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
GPL/LGPL informações Gerais  
Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public  
License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos  
direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL  
específicos de cada licença.  
menos três anos da data de embarque do produto.  
Você também pode solicitar os códigos fonte contactando TRENDnet, 20675 Manhattan Place, Torrance, CA 90501, USA.Tel: +1-310-  
961-5500, Fax: +1-310-961-5511.  
GPL/LGPL üldinformatsioon  
See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General Public  
License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik Litsentsiga. Koode  
vahendatakse ILMA GARANTIITA ja need on allutatud arendajate poolt. TRENDnet ei anna koodidele tehnilist tuge. Detailsemat infot  
GNU GPL ja LGPL kohta leiate toote CD-ROMil. Infot mõlema litsentsi spetsiifiliste terminite kohta leiate  
alates toote kättesaamise kuupäevast.  
Samuti võite lähtekoodi paluda TRENDneti'lt, 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500, Fax: +1-310-  
961-5511.  
 
Fiber Converters  
Fiber Converters /10.30.2012  
 
Fiber Converters  
Fiber Converters /10.30.2012  
 

Technicolor Thomson Network Router Thomson CABLE MODEM User Manual
Technicolor Thomson Portable CD Player PDP2075 User Manual
TOA Electronics Universal Remote C RM1000 CU User Manual
TRENDnet Security Camera TVIP672PI User Manual
Tripp Lite Power Supply AG 0020 User Manual
Uniden Two Way Radio GMR2889 2CK User Manual
Unified Brands Fryer Braising Pan User Manual
Vax Flat Panel Television 20RTC User Manual
ViewSonic Digital Photo Frame DPX804BK User Manual
Vizio Vacuum Cleaner VZL 6011 User Manual