Quick Installation Guide
TEG-S50g
TEG-S80g
Download from Www.Somanuals.com. All Manuals Search And DownloHad/. W: V1
1. Before You Start
Package Contents
TEG-S50g/TEG-S80g
Quick Installation Guide
AC Power Adapter (7.5V DC, 1A)
Installation Requirements
A computer with a network adapter installed
Cat-5e or Cat-6 Network Cable
The surface must support at least 1.5 Kg for the Switch
The power outlet should be within 1.82 meters (6 feet) of the Switch
Visually inspect the DC power jack to make sure that it is securely
connected to the power adapter
Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch
Do not place heavy objects on the Switch
1
English
Application
TEG-S50g
1
Delivers less power
to unused ports
on
on
less power
2
Delivers less power
when devices are off
on
on
off
less power
3
20m
60m
100m
GREENnet
Switch
Delivers less power
with shorter
Full Power
cable lengths
20m
60m
100m
Regular
Switch
*Max power savings compared with standard TRENDnet switches.
TEG-S80g
1
Delivers less power
to unused ports
on
on
less power
2
Delivers less power
when devices are off
on
on
off
less power
3
20m
20m
60m
100m
GREENnet
Delivers less power
Switch
with shorter
Full Power
cable lengths
60m
100m
Regular
Switch
*Max power savings compared with standard TRENDnet switches.
2
English
2. Hardware Installation
1. Connect the AC Power Adapter to
the TEG-S50g/TEG-S80g and then
to a power outlet.
2. Connect a CAT-5e or CAT-6 RJ-45
network cable from the computer to
an available Ethernet port of the
TEG-S50g/TEG-S80g.
3
English
3. LEDs
TEG-S50g
Power
Link/ACT
Green: Poweris on.
NotIlluminated: Poweris off.
Green(Solid): Link to another
device.
Green(Blinking): Activity is
occurring from the link
Not Illuminated: Nothing is
detected on the port.
1000Mbps
100Mbps
Green: Connection for the port is
1000 (Full)
Green: Connection for the port is
100 (Full)
Not Illuminated: Connection for
the port is 10 or 100 or nothing
is detected on the port.
Not Illuminated: Connection for
the port is 10(Full/Half) or
1000(Full/Half) or nothing is
detected on the port.
4
English
TEG-S850g
Power
Link/ACT
Green: Poweris on.
NotIlluminated: Poweris off.
Green(Solid): Link to another
device.
Green(Blinking): Activity is
occurring from the link
Not Illuminated: Nothing is
detected on the port.
100/1000Mbps
Green: Connection for the port is
1000 (Full)
Amber: Connection for the port
is 100 (Full/Half)
Not Illuminated: Connection for
the port is 10(Full/Half) or
nothing is detected on the port.
5
English
Technical Specifications
Hardware
Standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Flow Control
Network Media
Ethernet: Cat. 3,4,5, up to 100m
Fast Ethernet: Cat. 5, up to 100m
Gigabit Ethernet: Cat. 5, 5e,6, up to 100m
Data Transfer Rate
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps
(full-duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
Protocol/Topology
Interface
CSMA/CD / Star
TEG-S50g: 5 x 10/100/1000 Auto-MDIX RJ-45 ports
TEG-S80g: 8 x 10/100/1000 Auto-MDIX RJ-45 ports
Data RAM Buffer
TEG-S50g: 104KBytes per device
TEG-S80g: 128Kbytes per device
Jumbo Frame Support
TEG-S50g: Up to 12Kbytes
TEG-S80g: Up to 9612Bytes
Packet Filtering/
Forwarding Rate
10Mbps Ethernet: 14,880pps (packet per second)
100Mbps Fast Ethernet: 148,800pps
1000Mbps Gigabit Ethernet: 1,488,000pps
MAC Address Learning
Filtering Table
Automatic Update
TEG-S50g: 4K entries per device
TEG-S80g: 4K entries per device
Switch Fabric
TEG-S50g: 10Gbps Forwarding Capacity
TEG-S80g: 16Gbps Forwarding Capacity
Power Consumption
TEG-S50g: 3.67W (max)
TEG-S80g: 5W (max)
6
Hardware
TEG-S50g: Power, Link/ACT, 100Mbps, 1000Mbps
TEG-S80g: Power, Link/ACT, 100/1000Mbps
Diagnostic LEDs
Power Adapter
7.5V DC, 1A External Power Adapter
171 x 98 x 28 mm (6.7 x 3.86 x 1.1 in.)
Dimensions
Weight
TEG-S50g: 430g
TEG-S80g” 450g
Temperature
Humidity
Operating: 0° ~ 40° C (32° ~ 104° F)
Storage: -10° ~ 70° C (14° ~ 158° F)
Operating: 10% ~ 90%
Storage: 5% ~ 90%
Certification
CE, FCC
7
Troubleshooting
Q1: After connecting the Switch to a power outlet, the LEDs do not turn on.
A1: Check the connection of the external power adapter to the TEG-S50g/
TEG-S80g and the power outlet. Also check that the power outlet is receiving
power.
Q2: When I connect a computer to one of the ports on the Switch, the Power and
the Link/ACT LED is lit, but I am not getting Gigabit speeds.
A2: First, check the LEDs. If you have the TEG-S50g, if the 1000Mbps LED is off,
the computer's connection speed is 10Mbps or 100Mbps. If you have the
TEG-S80g, if the 100/1000Mbps LED is amber, the computer's connection speed
is 100Mbps. If the 100/1000Mbps LED is off, the computer's connection speed is
10Mbps. Second, check the Ethernet Cable. Make sure you are using CAT-5e or
CAT-6 Ethernet Cables. Some CAT-5 cables are not rated to run in Gigabit. Third,
make sure that you have a Gigabit Ethernet adapter installed on your computer.
Q3: After I connect my PCs to the Switch, I am unable to share files.
A3: First, check the LEDs on the Switch. Make sure the Link/ACT LED is on.
Second, check the network cable. The minimum length of the cable is 1.5 meters
and the maximum length of the cable is 100 meters. Third, disable any software
firewall program. Fourth, verify that you have file sharing enabled. Please contact
your Operating System support for more information.
Q4: After I connect my PCs to the Switch, I can only get onto the Internet from one
computer.
A4: The Switch was not designed to share Internet between multiple computers.
You need to get an Internet router such as the TW100-S4W1CA.
Q5: Where is the uplink port located on the Switch?
A5: Since all the ports on the Switch are Auto-MDIX, any of the ports can be used
as an uplink port.
If you still encounter problems or have any questions regarding the TEG-S50g/
TEG-S80g please contact Trendnet's Technical Support Department.
8
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEG-S50g/TEG-S80g - 5-Year Limited Warranty
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
9
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year
Warranty
10
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2008. All Rights Reserved. TRENDnet.
|