You will need your new battery faceplate, your headset, and a small Phillips screw driver.
Step 1
Step 2
Remove the two screws located on the
back of the headset.
Turn the headset over and remove the face-
plate with the logo and batteries attached.
Step 3
Step 4
Screw the new faceplate on the headset
Make sure the headset is turned off. Place the
headset on the transmitter (charger) and allow
your TV Ears to charge for 8 hours.
TV Ears Inc. 2810 Via Orange Way Suite ‘A’ Spring Valley CA 91978
Phone: (888) 883-3277 Fax: (888) 958-7899
|