TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty
WhAT IS COvERED: Any defect in materials and workmanship.
FOR hOW LONg: 2 years from date of purchase.
WhAT WE WILL DO: If your product is defective and returned within 30 days
after the date it was purchased, we will replace it at no charge to you. If
returned after 30 days but within 2 years of the date of purchase we will
repair it or, at our option, replace it at no charge to you.
If we repair your product, we may use new or reconditioned replacement
parts. If we choose to replace your product, we may replace it with a
new or reconditioned one of the same or similar design. The repair or
replacement will be warranted under our standard 2 year warranty.
LIMITATIONS: IMPLIED WARRANTIES, INCLUDINg ThOSE OF FITNESS FOR A
PARTICULAR PURPOSE AND MERChANTAbILITy (AN UNWRITTEN WARRANTy
ThAT ThE PRODUCT IS FIT FOR ORDINARy USE), ARE LIMITED TO 2 yEARS
FROM DATE OF PURChASE. WE WILL NOT PAy FOR LOSS OF TIME, INCONvE-
NIENCE, LOSS OF USE OF yOUR PRODUCT OR PROPERTy DAMAgE CAUSED
by yOUR PRODUCT OR ITS FAILURE TO WORk, OR ANy OThER INCIDENTAL
OR CONSEqUENTIAL DAMAgES INCLUDINg PERSONAL INjURy.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages,
so the above exclusions or limitations may not apply to you.
Portable Power Source
200 WATTS/400WATTS PEAK
WhAT WE ASk yOU TO DO: To get warranty service for your product,
you must provide proof of the date of purchase. Within 30 days of the
date it was purchased, return your product to your place of purchase for
immediate replacement. After 30 days, but before the end of the 2 year
warranty period, you may return the product to the following address:
Team Products International
Owner’s Manual
Attn: Customer Service Returns
35 A Continental Drive
Wayne, Nj 07470
We suggest that you retain your original packing material in the event
you need to ship your product. When sending your product include your
name, address, phone number, proof of date of purchase, and a
description of the operating problem. After repairing or replacing your
product, we will ship it to your home or office within four weeks.
WhAT ThIS WARRANTy DOES NOT COvER: Among oTher ThIngS ThIS
WArrAnTy doeS noT cover defecTS reSulTIng from AccIdenTS,
dAmAge WhIle In TrAnSIT To our ServIce locATIon, AlTerATIonS,
unAuThorIzed repAIr, fAIlure To folloW InSTrucTIonS, mISuSe, fIre,
flood, And AcTS of god. If your producT IS noT covered by our
WArrAnTy, cAll our cuSTomer ServIce number AT (888) 231-4022 To
deTermIne WheTher We WIll repAIr your producT And oTher repAIr
InformATIon, IncludIng chArgeS. We, AT our opTIon, mAy replAce
rATher ThAn repAIr your producT WITh A neW or recondITIoned
one of The SAme or SImIlAr deSIgn. The repAIr or replAcemenT WIll
be WArrAnTed for 2 yeArS.
PMP200XL Models
ThIS lImITed WArrAnTy IS The only one We gIve on your producT,
And IT SeTS forTh All our reSponSIbIlITIeS regArdIng your producT.
There Are no WArrAnTIeS WhIch exTend beyond The deScrIpTIon SeT
forTh Above.
©2006The Coleman Company, Inc. All rights reserved.
STATE LAW RIghTS: This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state.
COLEMAN® and
are registered trademarks ofThe Coleman Company, Inc., used under license.
Designed in the USA and custom-manufactured in China forTeam Products International Inc.
Distributed byTeam Products International Inc., Mountain Lakes, NJ 07046.
PMP200XL122205-191
PMP200XL_122205M.indd 2-3
12/22/05 9:09:47 AM
Owner’s Manual
PMP200XL Models
Location of Controls
1. ON/OFF Power Switch
2. Green LED Indicator Light
3. Protective Outlet Cover
4. 110/120 Volt AC Outlet
5. Cooling Fan
5
Welcome
This COLEMAN® product has been carefully engineered and manufactured
to give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.
1
2
6
3
6. Red LED Indicator Light
7. 12Volt DC Power Cord
8. Clips For Power Cord
9. Fuse Cover
About COLEMAN® Inverters
4
The new line of super-efficient COLEMAN® power inverters are innovative in
design and have the highest surge capability in the industry.These extremely
advanced, microprocessor controlled units run cooler and more reliable than
any in their class.Their superior surge capability allows them to start even
the most difficult loads, including color televisions,TV/VCR combinations,
microwaves, refrigeration units, even small air conditioners!They also sport
the highest efficiency available (up to 80%) which translates into longer running
time and extended battery life. Inverters convert low voltage, direct current (DC)
to 110/120-volt alternating current (AC). Depending on the model and its rated
capacity, the inverters draw power either from standard 12-volt automobile and
marine batteries or from portable high power 12-volt sources.
10. 25Amp Fuse
7
8
Getting Started
When you turn on an appliance or a tool that operates using a motor or a tube,
(such as a television), it requires an initial surge of power to start up.This surge
of power is referred to as the “starting load” or “peak load”.
Once started, the appliance or tool requires less power to continue to operate.
This is referred to as the “continuous load.” You will need to determine how
much power your appliance or tool requires to start up (peak power) and it’s
continued operating power requirements (continuous load). Power consumption
is rated either wattage (watts) or amperes (amps).This information is usually
stamped or printed on most appliances and equipment. If this information is
not indicated on the actual product, check the owner’s appliance or equipment,
check the owner’s manual or contact the manufacturer to determine the power
consumption. Be sure that the power consumption of the item you wish to
operate is rated at 200 watts or less.
9
Multiply: AMPS X 110/120 (AC voltage) = WATTS
This formula yields a close approximation of the continuous load of the
appliance. All COLEMAN® inverters are designed to automatically shut down in
the event of a power overload. This protection feature prevents damage to the
unit while testing items with ratings in the 200-watt range.
F
U
10
S
E
2
1
PMP200XL_122205M.indd 6-7
12/22/05 9:09:47 AM
Owner’s Manual
PMP200XL Models
CAUTION
Source of Power
•The inverter is designed to operate from a 12-volt power source only.The unit
will not operate from a 6-volt battery or a 24-volt battery. Do not attempt
to connect the inverter to any other power nominal output voltage
other than 12 volts or damage to the unit may occur. Any damage
to the unit that occurs from operating the inverter from any power
source greater than or less than 12 volts will automatically void the
warranty.
Most automobile and marine batteries will provide an ample power supply to
the inverter for 30 to 60 minutes even when the engine is turned off. Actual time
may vary depending on the age and condition of the battery and the power
demand being placed on it by the equipment being operated.
If you decide to use the inverter while the engine is off, we recommend that
you start the engine every 30 to 60 minutes and let it run for approximately 10
minutes to recharge the battery. It is also recommended that the device plugged
into the inverter be turned OFF before starting the vehicle engine.
• Do not attempt to extend or otherwise modify the 12-volt power cord attached
to the inverter.
Although it is not necessary to disconnect the inverter when starting the vehicle
engine, it may momentarily cease to operate as the battery voltage decreases.
When the inverter is not supplying power, it draws very low amperage from the
battery. It is recommend that the inverter always be disconnected when not in
use.
• 110/120 volts can inflict serious injury, damage or death. Improper use of the
inverter may result in property damage, personal injury or loss of life.
Connecting the Inverter
The inverter is equipped with a fused 12-volt power cord for connection to the
power source.
Blown Automotive Fuses
Depending on the make and model of your automobile, running the power
inverter near full capacity from your cigarette lighter socket may result in a
blown automotive cigarette lighter fuse.This fuse will need to be replaced with
the same type and size fuse. A blown automotive cigarette lighter fuse will not
cause damage to your vehicle wiring.
1. Make sure that the ON/OFF power switch located on the front panel of
inverter is in the OFF(O) position.
2. Connect the inverter to the power source by inserting the 12-volt power cord
firmly into the cigarette lighter socket of your vehicle or other 12-volt DC
power source.
3.Turn the inverter power switch to the ON(-) position.The GREEN LED Indicator
Light should illuminate to confirm that power is running to the inverter.
Blown Inverter Fuses
Your power inverter is equipped with a 25-amp spade type fuse. With
reasonable care, it should not be necessary to replace this fuse. In general,
most blown fuses are the result of reverse polarity hook up of the inverter to a
12-volt power source (positive to negative and/ or negative to positive). If the
fuse happens to blow, disconnect the appliance or equipment from the inverter
immediately. Find the source of the problem, repair it and then install a new
fuse of the same type and size located on the rear panel of the inverter.
4. Make sure that the device you intend to operate is turned OFF. Plug the cord
from the equipment into the AC outlet located on the front panel of the
inverter.
5.Turn the inverter power switch to the ON(-) position; then turn the
equipment ON.
Note
Notes
Always disconnect the power inverter from the 12-volt power source and make
sure the inverter is turned OFF before replacing the fuse.
•The audible alarm may make a momentary “chirp” when the inverter is turned
ON (-) or OFF(O).This same alarm may also sound when the inverter is being
connected to or disconnected from the 12-volt power source.This is normal.
Safety and Usage Precautions
• If the GREEN LED Indicator Light blinks when you first turn the inverter ON(-),
this may indicate an interruption of the power supply. Simply turn the inverter
OFF(O) and remove the 12-volt power cord from the cigarette lighter socket (or
other 12-volt power source). Firmly re-insert the 12-volt power cord, then turn
the inverter ON(-) again. If this does not fix the problem, try using a different
12-volt power source or check the cigarette lighter fuse.
• For best operating results, place the inverter on a flat surface.
• Keep the inverter dry. Do not expose the inverter to rain or moisture.
• DO NOT operate the inverter if you, the inverter, the device being operated, or
any surface that may come into contact with the inverter are wet. Water and
other liquids can conduct electricity, which may lead to serious injury or death.
3
4
PMP200XL_122205M.indd 8-9
12/22/05 9:09:47 AM
Owner’s Manual
PMP200XL Models
• Avoid placing the inverter on or near heating vents, radiators or other
sources of heat. Do not place or use the inverter in direct sunlight. Ideal air
temperatures should be between 50°F and 80°F.
Television and Audio Suggestions
Although all COLEMAN® inverters are shielded and filtered to minimize
signal interference, some interference with your television picture may be
unavoidable, especially with weak signals. However, here are some suggestions
that may improve reception:
• In order to properly disperse the heat generated from the inverter while it is
operating, keep the inverter well ventilated. Keep the area surrounding the
inverter clear while in use.
• Make sure the television antenna produces a clear signal under normal
operating conditions (at home plugged into a standard 110/120- volt AC
outlet). Also, ensure that the antenna cable is properly shielded and/or good
quality.
• Do not use the inverter near flammable materials. Do not place the inverter in
areas such as battery compartments where fumes or gases may accumulate.
• Change the positions of the inverter, antenna cables and the television power
cord.
Inverter Protection Features
• Short Circuit Protection.The inverter will automatically shut down until
short is removed.
• Isolate the television, its power cord and antenna cables from the 12-volt
power source by running an extension cord from the inverter to the television
set.
• Low Voltage Alarm. An alarm will sound when the voltage from the battery
discharges to 10.5 +/- 0.5 volts DC.This is an indication that the battery needs
to be recharged.
• Coil the television power cord and the input cables running from the 12-volt
power source to the inverter.
• Over Voltage Protection.The RED LED Indicator Light will illuminate and
the inverter will automatically turn itself off when the input exceeds 16.5 +/- 1
volt DC.
• Attach an AC interference filter or similar product between the inverter and
the television power cord.These filters are available at most electronic supply
stores including Radio Shack.
• Under Voltage Protection. The RED LED Indicator Light will illuminate and
the inverter will automatically turn itself off when the input is less than 10.0+/-
0.5 volts DC.
Note
Inexpensive sound systems may emit a “buzzing” sound when operated with
an inverter.This is due to the inadequate filters in the sound system.There is
no solution to this problem other than purchasing a sound system with a higher
quality power supply.
• Overload Protection.The RED LED Indicator Light will illuminate and
the inverter will automatically turn itself off when the continuous draw of
the equipment being operated exceeds 200 watts or the surge draw of the
equipment exceeds 400 watts.
•Thermal Protection. The RED LED Indicator Light will illuminate and the
inverter will automatically turn itself off when the circuit temperature exceeds
130°F.
How Power Inverters Work
Power inverters convert low voltage DC (direct current) power to 110/120-volt
AC (alternating current) household power.This conversion process thereby
allows you to use household products, power tools, and other electronic
products away from normal AC power sources (standard 110/120V wall outlets).
Notes
•The inverter is equipped with a cooling fan, which is designed to run
continuously while the inverter is operating. Automatic shut down of the unit
caused by high circuit temperatures will occur when the cooling fan is unable
to maintain a cool enough temperature for safe operation.
Depending on the model and its rated capacity, inverters can draw power
either from standard 12-volt automobile and marine batteries or from portable
high power 12-volt power sources.The waveform that is generated by this
conversion is a “modified sine wave”.The modified sine wave produced by our
inverters has a root square mean (RMS) voltage of 110/120 volts, which is the
same as standard household power.
• In the event of automatic shut down or a continuous audible alarm, turn the
inverter power switch to the OFF(O) position until the source of the problem
has been determined and resolved.
The majority of AC voltmeters are calibrated for RMS voltage under the
assumption that the measured waveform will be a pure sine wave.Therefore,
these meters will not read the RMS modified sine wave voltage correctly.
5
6
PMP200XL_122205M.indd 10-11
12/22/05 9:09:48 AM
Owner’s Manual
PMP200XL Models
They will read about 20 to 30 volts too low.To accurately measure the output
voltage of the inverter, use a true RMS reading voltmeter such as a Fluke 87,
Fluke 8060A, Beckman 4410,Triplett 4200 or any voltmeter identified as a “true
RMS” modified sine wave.
SPECIFICATION:
Max. Continuous Power ....................................................200 Watts
Surge Capability (Peak Power) ..........................................400 Watts
No Load Current Draw ............................................................<0.3A
Waveform ..........................................................Modified Sine Wave
Input Voltage Range ........................................................11-15 VDC
AC Receptacle ......................................... 110/120V AC 3 prong rounded
Fuse ................................................................ 25 amp (spade type)
In Review
• Never attempt to operate the inverter from any other power source other than
a 12-volt battery.
•The inverter is designed to be connected to the power source with the supplied
12-volt power cord. Do not attempt to modify the power cord in any way.
• When connecting and using the inverter, make sure that the inverter is
positioned far away from any potential source of flammable fumes or gases.
Dimensions ............................................. 3.6”(L) x 4.1”(W) x 6.9”(H)
92(L) x 105(W) x 175(H) /mm
• Make certain that the power consumption of the equipment you wish to
operate is compatible with the capacity of the inverter. Do not exceed 200-
watts.
Weight ................................................................................ 1.144 lbs (0.52 kgs)
Power Cord Cable ............ 14 AWG (Black) with cigarette plug x 1 pc.
• When attempting to operate battery chargers, monitor the temperature of the
battery charger for approximately 10 minutes. If the battery charger becomes
abnormally warm, disconnect it from the inverter immediately.
WARNING:
The wattage output from your 12 Volt power port may vary depending on the
make and model of your vehicle. Please check your owner’s manual.
• Use only 25 amp spade type fuses for the inverter.
• When operating the inverter with an automobile or marine battery, start the
engine every 30 to 60 minutes and let it run for approximately 10 minutes to
recharge the battery.
Questions?
• In the event of a continuous audible alarm or an automatic shut down of the
unit, turn the inverter OFF immediately. Do not turn the inverter ON again until
the source of the problem has been identified and corrected.
If you have any questions about this product, please contact our Customer
Service Department at (888) 231-4022, 9 AM to 5 PM EST, Monday through
•To avoid battery drain, always disconnect the inverter when not in use.
• Do not expose the inverter to rain or moisture.
• Avoid placing the inverter near sources of heat or in direct sunlight.
• While in use, make sure that the inverter is properly ventilated.
• For best operating results, make sure the unit is placed on a flat surface.
Note
If you would like to purchase battery clips for this inverter, they are available for
purchase through our Customer Service Department at: 1-888-231-4022
8
7
PMP200XL_122205M.indd 12-13
12/22/05 9:09:48 AM
Owner’s Manual
PMP200XL Models
Troubleshooting
Troubleshooting
PROBLEM: Low or No Output Voltage
Reason
PROBLEM:TV Interference
Reason
Solution
Solution
Electrical interference from
the inverter.
Add an AC interference filter on
to theTV power cord. Refer
toTV and audio section of
this manual.
Poor contact with
lighter socket or
battery terminals.
Unplug and reinsert 12
volt plug or reattach
battery clips.
Using incorrect type of
voltmeter to test
output voltage.
Use true RMS reading meter.
PROBLEM: Low Battery Alarm On AllTheTime
Reason
Solution
Input voltage below10.5 0.5 volts.
Keepinputvoltageabove10.5 0.5
volts to maintain regulation.
PROBLEM: Red LED On
Reason
Solution
Poor or weak
Recharge or
Battery voltage below
10.0 0.5 volts.
Recharge or replace battery.
battery condition.
replace battery.
Inadequate power being
delivered to the inverter
or excessive voltage drop.
Check condition of cigarette
lighter socket. Clean or
replace if necessary
Equipment being operated
draws too much power.
Use a higher capacity inverter
or do not use this equipment.
PROBLEM:TV Does Not Work
Inverter is too hot (thermal
shutdown mode).
Allow inverter to cool.
Check for adequate ventilation.
Reduce the load on the
inverter to rated continuous
power output
Reason
Solution
TV does not turn on.
Try turning the inverter
ON/OFF/ON.
ContactTV manufacturer for
start up surge and power
consumption.
Unit may be defective.
See Warranty and call
Customer service at
1-888-231-4022.
A larger inverter may
be required.
10
9
PMP200XL_122205M.indd 14-15
12/22/05 9:09:50 AM
Owner’s Manual
PMP200XL_122205M.indd 16-17
12/22/05 9:09:51 AM
|