Technicolor Thomson Stereo System MS2200 User Manual

MS2200 EN 11/17/03 1:59 PM Page 2  
THOMSON  
46, quai Alphonse Le Gallo  
92648 Boulogne  
Cedex FRANCE  
55851320  
 
MS2200 EN 11/17/03 1:59 PM Page 4  
Safety Information  
BLUE = NEUTRAL / BROWN = LIVE  
EN For UK Only  
If the colors of the wires in the mains lead of this  
apparatus may not correspond with the colored  
markings identifying the terminals in your plug,  
proceed as follows:  
BLUE wire to the terminal coded N (Neutral) or  
colored black.  
CONNECT THE MAIN LEAD INTO A MAINS  
POWER SOCKET  
POWER SUPPLY 230V. It must not be  
connected to D.C. mains.  
BROWN wire to the terminal coded L (Live) or  
colored red.  
Note: The mains lead of the set is fitted with a  
molded plug. If the mains socket are not  
compatible or if for any reason the plug is  
removed please follow the directions below. The  
molded plug cannot be rewired and if removed  
must be  
DO NOT make any connection to  
the terminal in the plug which is  
marked by the letter E or by the  
earth symbol or colored green or  
green and yellow.  
disposed of safely.  
DO NOT under any circumstances plug the  
severed plug into any mains socket as this could  
result in electric shock.  
A fused plug must be fitted  
with a 3A fuse approved by  
ASTA or BS1362 and fuse cov-  
ers must be always be securely  
replaced. If you set does not  
work, the fuse may be blown.  
Important: If the plug is removed, rewire the  
new plug as follow:  
The wires in the mains plug are colored in  
accordance to the following code:  
The descriptions and characteristics given in this document are given as a general indication and not as a guarantee.  
In order to provide the highest quality product possible, we reserve the right to make any improvement or  
modification without prior notice. The English version serves as the final reference on all products and operational  
details should any discrepancies arise in other languages.  
 
MS2200 EN 11/17/03 1:59 PM Page 5  
Safety Information  
ADVARSEL!  
CAUTION!  
EN  
USYNLIG LASERSTRÅLNING VED ÅBNING NAR  
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.  
UNGDÅ UDSAETTELSE FOR STRÅLNING.  
Invisible laser radiation when open. Avoid expo-  
sure to beam. Class 1 laser product. This system  
must be opened only by qualified technicians to  
prevent accidents caused by the laser beam.  
VORSICHT!  
UNSICHTBARE LASERSTRALUNG  
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–  
VERRIEGELUNG ÜBERBRÜCKT.  
NICHT DEM LASERSTRAHL AUSSETZEN!  
LASER λ = 780 nm, P max = 5 mW  
CAUTION  
INVISIBLE LASER RADIATION  
Rating Information: At bottom/rear of the unit.  
This unit comply with the existing requirements  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
ATTENTION  
RAYONNEMENT LASER INVISIBLE  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
In accordance with the rating plate of  
the unit, this unit complies with  
current standards concerning electrical  
safety and electromagnetic  
compatibility.  
Please respect the environment Before  
throwing any batteries away, consult  
your distributor who may be able to  
take them back for specific recycling.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
APPAREIL  
A
LASER DE CLASSE  
1
LUOKAN 1 LASERLAITE  
KLASS 1 LASERAPPARAT  
Have a Blast- Just Not in Your Eardrums  
Make sure you turn down the volume  
on the unit before you put on head-  
phones. Increase the volume to the  
desired level only after headphone are  
in place.  
VARNING–  
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.  
BETRAKTA EJ STRÅLEN.  
VARO!  
AVAT TAESSA JA SOUJALUKITUSOHITETTAESSA  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.  
LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
T H E L I G H T N I N G  
CAUTION: TO REDUCE THE THE EXCLAMATION  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
FLASH AND ARROW-  
HEAD WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
TRIANGLE IS  
A
WARNING  
SIGN  
ALERTING YOU OF  
T A T  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
WA R N I N G S I G N  
ALERTING YOU OF  
" D A N G E R O U S  
VOLTAGE" INSIDE  
THE PRODUCT.  
I
M
P
O
R
N
I N S T R U C T I O N S  
A C C O M PA N Y I N G  
T H E P R O D U C T.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
 
MS2200 EN 11/17/03 1:59 PM Page 6  
Table of Content  
Setting Up a CD Program . . . . . . . . . . . . . . .8  
Safety Information  
EN  
Playing a Program List . . . . . . . . . . . . . . . . .8  
Displaying the Program List . . . . . . . . . . . .8  
Deleting Program List . . . . . . . . . . . . . . . . .8  
Getting Started . . . . . . . . . . . . . . . .2  
Unpacking the system . . . . . . . . . . . . . . . . . . . .2  
Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Using the FM and Am Antennas . . . . . . . . .2  
Connecting the Speakers . . . . . . . . . . . . . . .2  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Radio . . . . . . . . . . . . . . . . . . . . . . . .9  
Selecting Tuner Band . . . . . . . . . . . . . . . . . . . . .9  
Tuning to a Station . . . . . . . . . . . . . . . . . . . . . . .9  
Using Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Auto Preset Programming (FM only) . . . . . . . .9  
Manually Setting Presets . . . . . . . . . . . . . . . . . .9  
Suppressing Stereo Signal . . . . . . . . . . . . . . . . .9  
Tuning to an RDS Station . . . . . . . . . . . . . . . . .10  
Displaying RDS Station Information . . . . .10  
Searching by Program Type (PTY) . . . . . . . . . .10  
General Controls . . . . . . . . . . . . . . .3  
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .4  
Installing Batteries . . . . . . . . . . . . . . . . . . . . .4  
Settings . . . . . . . . . . . . . . . . . . . . . .5  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Showing Demonstration . . . . . . . . . . . . . . . . . .5  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . .5  
Setting the Timer . . . . . . . . . . . . . . . . . . . . . . . .5  
Activating the Timer . . . . . . . . . . . . . . . . . . .5  
Adjusting the Display Brightness . . . . . . . . . . .5  
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Tape Player . . . . . . . . . . . . . . . . . . .11  
Playing a Tape . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
From Tuner . . . . . . . . . . . . . . . . . . . . . . . . . .11  
From CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
From an Auxiliary Input . . . . . . . . . . . . . . .11  
Sound Features . . . . . . . . . . . . . . . .6  
Preset Equalizer Curves . . . . . . . . . . . . . . . . . . .6  
Creating Custom curves . . . . . . . . . . . . . . . . .6  
Bass Boost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Muting Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Troubleshooting Tips . . . . . . . . . . .12  
Maintenance . . . . . . . . . . . . . . . . .13  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Tape Player . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Handling CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Cleaning CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
CD Lens Care . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
CD Player . . . . . . . . . . . . . . . . . . . . .7  
Notes on CD-R/RW Disc . . . . . . . . . . . . . . . . . . .7  
Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Play and Load Simultaneously . . . . . . . . . . .7  
Skipping a Disc . . . . . . . . . . . . . . . . . . . . . . . .7  
Skipping Tracks . . . . . . . . . . . . . . . . . . . . . . . .7  
Searching Through a CD . . . . . . . . . . . . . . . .7  
Random Playback . . . . . . . . . . . . . . . . . . . . . .7  
Sampling Tracks . . . . . . . . . . . . . . . . . . . . . . .8  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Important Information . . . . . . . . .14  
Safety Precautions . . . . . . . . . . . . . . . . . . . .14  
Headset Safety . . . . . . . . . . . . . . . . . . . . . . . . .14  
Important Battery Information . . . . . . . . . . .14  
Don’t Infringe . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Technical Specification . . . . . . . . . . . . . . . . . . .14  
1
 
MS2200 EN 11/17/03 1:59 PM Page 7  
Getting Started  
Connecting the Speakers  
Unpacking the system  
You should have the following:  
• one main unit (with 2 main speakers);  
• one remote control;  
• one AM loop antenna;  
• one user’s guide;  
EN  
Match the red wire (on the left speaker) to red  
terminal for the left speaker (L) on the back of  
the unit and the black wire (on the left speaker )  
to the black terminal for left speaker (L). Follow  
the same procedure to connect the right (R)  
speaker.  
• one Thomson Warranty Card  
Speaker Wire Connection  
Back View  
Push Speaker terminal tab  
down to insert wire.  
Release tab to lock wire in  
the terminal.  
NOTE: Make sure the insulation  
is completely removed from the  
speaker wires at all connection points.  
ends of the  
Installation  
To ensure sufficient ventilation, keep the spacings  
1
3
2
shown below free from other surfaces:  
+
Front View  
10 cm  
+
5
T
DISC CHANGER  
Y
S
I
M
U
L
A
N
E
O
U
S
P
L
A
Y
A
N
D
L
O
A
D
S
S
T
E
M
C
D
-
R
/
R
W
C
O
M
P
A
T
I
B
L
E
ON  
10 cm  
10 cm  
DISC  
SKIP  
1. FM Pigtail Antenna  
IR SENSOR  
ECO  
ECO  
L
PRESET EQ  
DIGITAL TUNING  
TUNEPRESET  
GAME  
SOURCE  
TIMER  
•mp3•  
R
2. AM Loop Antenna Connector  
3. Main Speaker Jacks  
DIMMER  
D
E
M
O
C
L
O
C
K
PROG  
SET BAND  
AUTO PROG  
RECORD  
CD INFO  
RDS  
B. BOOST  
PUSH  
CASSETTE DECK  
PLAYBACK/ RECORD  
D
I
G
I
T
A
L
L
O
G
I
C
D
E
C
K
Using the FM and AM Antennas  
Before you use your audio system, you’ll want to  
make sure both the FM and AM antennas are  
positioned properly. Uncoil the FM antenna at  
the back of the unit, making sure it is fully  
extended (you may even want to tape it to the  
wall behind the unit if possible. The higher the  
better.) You’ll also need to connect the AM  
antenna loop to the back of the unit if you listen  
to AM stations. Rotate the AM loop antenna for  
better reception.  
Side View  
5 cm  
10 cm  
2
 
MS2200 EN 11/17/03 1:59 PM Page 8  
General Controls  
Main Unit  
EN  
SOURCE — Selects among CD player, tuner, tape  
player and AUX.  
DIMMER•DEMO / CD INFO —Turns the  
feature demonstration on or off; adjusts display  
brightness; selects among displaying disc details.  
TIMER — Enters timer setting mode; turns timer  
on/off.  
5 DISC CHANGER  
A
S
I
M
U
L
T
A
N
E
O
U
S
P
L
A
Y
N
D
L
O
A
D
S
Y
S
T
E
M
CD-R / RW COMPATIBLE  
ON  
DISC  
SKIP  
IR SENSOR  
ECO  
CLOCK / RDS — Shows clock time and enters  
clock setting mode; shows RDS information in  
Tuner Mode (FM).  
ECO  
L
PRESET EQ  
DIGITAL TUNING  
TUNEPRESET  
GAME  
SOURCE  
TIMER  
•mp3•  
R
DIMMER•DEMO CLOCK  
PROG•SET BAND  
RECORD  
CD INFO  
RDS  
AUTO PROG  
B. BOOST  
PUSH  
PRESET EQ — selects among the different EQ  
modes.  
DIGITAL TUNING  
(SKIP BACKWARD) —  
CASSETTE DECK  
PLAYBACK/ RECORD  
D
I
G
I
TA  
L
L
O
G
I
C
D
E
C
K
Decrements radio frequency, preset down, fast  
search backward through the CD, goes to the  
previous CD track or setting option; rewinds tape.  
DIGITAL TUNING  
(SKIP FORWARD) —  
Increments radio frequency, preset up, fast search  
forward through the CD, goes to the next CD  
track or setting option, fast forwards tape.  
PLAY / PAUSE — Plays or pauses CD and  
tape operation.  
ON/ECO — Press and hold in standby mode to  
enter ECO (power saving, without clock display)  
mode. The red ECO indicator lights up when the  
unit is in ECO mode.  
Press briefly to turn on and off the unit.  
TUNE•PRESET  
— Stops CD track, Sets tune or  
preset mode.  
PROG•SET — Enters program mode for CD and  
Tuner; Applies new settings for Clock and Timer  
modes.  
Tips:  
BAND/AUTO PROG. — Changes among tuner  
bands. Enters auto preset program in FM mode.  
B. BOOST — Turns BASS BOOST on or off.  
RECORD — Starts tape recording.  
DISC SKIP — Skips to the next CD in the tray  
VOLUME CONTROL — Increases/ decreases  
volume.  
In STANDBY mode (press ON/ECO off), the  
system displays the time. Press ON/ECO to  
turn the system on in the previously used  
mode. Press CD, TAPE, TUNER, or AUX  
(Remote only) to select the corresponding  
mode. Look at the display icons to identify  
the current mode.  
GAME •mp3• L / R / AUX IN - Jack for auxiliary  
connection.  
PHONES  
OPEN•CLOSE  
tray.  
— Jack for connecting headphones  
— Opens or closes the disc  
3
 
MS2200 EN 11/17/03 1:59 PM Page 9  
General Controls  
Remote Control  
EN  
ON•ECO — Press and hold in STANDBY mode to enter ECO (power  
saving, without clock display) mode.  
CD — Selects CD player.  
SOURCE  
TUNER  
TAPE  
CD  
AUX  
TUNER — Selects radio tuner.  
TAPE — Selects tape player.  
B
.B  
O
O
E Q  
S
T
DEMO/DIMMER  
CD INFO  
ON•ECO  
AUX — Selects external input.  
EQ — Selects equalizer presets.  
VOL  
B.BOOST — Turns on or off Bass Boost.  
DIMMER / DEMO / CD INFO — Turns the feature demonstration on  
or off; adjusts display brightness; selects among displaying disc details.  
VOL+ or VOL- — Increases / decreases volume.  
PLAY/PAUSE — Plays and Pauses the CD or tape.  
PREV  
R
E
V
FWD  
VOL  
NEXT  
/ FWD  
— In CD mode - Increments CD track and  
RECORD  
STOP  
PTY  
setting options; searches forward through CD;  
In Tuner mode - tunes up radio frequency;  
In Tape mode - fast forwards tape.  
REPEAT•RDS  
FM ST.  
DISC SKIP  
INTRO•CT  
SLEEP  
DN•PRESET•UP  
PREV  
/REV  
— In CD mode - Decrements CD track and  
setting options; searches backward through CD;  
In Tuner mode - tunes down radio frequency;  
In Tape mode - rewinds tape.  
RECORD — Starts tape recording.  
STOP — Stops CD and tape playback.  
REPEAT•RDS — Repeats a track, CD, or all CDs. When the radio is  
active, displays RDS information.  
MUTE — Mutes volume.  
/PTY — Turns on/off random listening, selects search by  
program type in tune mode.  
FM ST. — Toggles between FM stereo and mono.  
DISC SKIP — Skips to next CD.  
INTRO•CT — Turns INTRO mode on or off to play the first 10 seconds  
of each track, shows RDS time.  
PRESET UP/DOWN — Selects next/ previous preset station.  
SLEEP — Press to select the time interval in minutes before the unit  
turns off.  
Installing Batteries  
The remote control must be inserted with 2 “AAA” or “R3” or “UM  
4” batteries prior to use. Follow the steps below to ensure correct  
installation.  
1. Open the battery compartment door (located at the back of the  
remote control) by sliding the cover out.  
Battery Size:  
“AAA” or “UM-4” or “R03”  
2. Before inserting the batteries, observe the polarities (that is,  
+ and -) of the battery then relate the polarities to the engraved  
diagram inside the battery compartment. Now insert the batteries.  
3. After installation of the batteries, place the lit to cover the  
batteries. Lightly push it closed with a snap.  
4
 
MS2200 EN 11/17/03 1:59 PM Page 10  
Settings  
3. Press DIGITAL TUNING  
the minute.  
or  
to set  
Display  
EN  
4. Press TIMER to change to OF (timer off time)  
with hour flashing. Repeat steps 2 & 3 for  
timer off time setting.  
BASS  
SURROUND  
5. Press TIMER to select source. Press DIGITAL  
TUNING  
or  
to select TUNER, TAPE or  
CD.  
6. Press TIMER to set volume. Press VOLUME  
CONTROL up or down to set desired volume  
level.  
7. Press PROG•SET to save settings or STOP to  
quit setting.  
Showing Demonstration  
Not operational in CD mode. Press  
DIMMER•DEMO / CD INFO to turn on/off  
demonstration mode. The demonstration scrolls  
through all display operations.  
Activating the Timer  
Press and release TIMER to turn on/off the timer.  
Setting the Clock  
1. Press and hold CLOCK/RDS until the hour  
The timer is active when the clock icon  
lit.  
is  
flashes on the display.  
2. Press DIGITAL TUNING  
the hour and then press CLOCK/RDS to shift to  
minute digits.  
3. Press DIGITAL TUNING  
the minute.  
4. Press PROG•SET to save settings and STOP  
to quit setting.  
or  
to set  
Adjusting the Display Brightness  
1. Press and hold DIMMER•DEMO / CD INFO  
for more than 2 seconds.  
or  
to set  
2. While the dimmer level is displayed, press and  
release DIMMER•DEMO / CD INFO  
repeatedly to select the desired level  
(DIMM 1 - 3).  
Note:  
DIMM 2  
When system is ON, you can press  
CLOCK/RDS to display the current time  
for about 2 seconds.  
Clock can not be set in FM mode.  
Note:  
The dimmer level can only be adjust for  
when the unit is in ON mode.  
In standby mode, the dimmer level  
remains at DIMM 3 and in magic demo  
mode, the dimmer level is at DIMM 1.  
Setting the Timer  
1. Press and hold TIMER until the ON appear  
with the hour flashing ( ON - timer on time )  
2. For setting time, press DIGITAL TUNING  
or  
to set the hour and then press TIMER  
to shift to minute digits.  
5
 
MS2200 EN 11/17/03 1:59 PM Page 11  
Settings  
Adjust Sleep Time  
Press SLEEP again when the remaining sleep time  
is displayed to change sleep time.  
Sleep Mode  
You can select the time interval in minutes before  
EN  
the unit turns off automatically.  
Press SLEEP on the remote to select among OFF,  
90, 60, 45, 30, 15 and 5 minutes. (Remote Only)  
Note:  
The sleep icon  
sleep mode is activated.  
flashes on the display when  
Sleep is automatically de-activated when  
the unit is turned off.  
View Remaining Sleep Time  
When sleep is activated, press SLEEP once to  
view remaining sleep time.  
Sound Features  
Preset Equalizer Curves  
BASS BOOST  
Press PRESET EQ on the main unit or EQ on the  
remote to toggle among FLAT, ROCK, POP, JAZZ,  
CLASS and CUSTOM.  
Press B. BOOST to turn on/off boosting the bass  
frequency.  
The display shows the selection briefly.  
Muting Audio  
Press MUTE  
sound. (Remote Only)  
on the remote to cut the  
Creating Custom Curve  
1. Press PRESET EQ to select CUSTOM mode.  
2. While "CUSTOM" is displayed, press DIGITAL  
TUNING  
or  
to cycle among  
displayed bass- and treble - range levels.  
3. While BAS or TRE is displayed, adjust  
VOLUME CONTROL to set the associated gain  
between -10 - +10.  
BAS+08  
6
 
MS2200 EN 11/17/03 1:59 PM Page 12  
CD Player  
This unit is compatible with  
CD-RW/ CD-R discs for  
playback.  
CD-R / RW  
Playing Discs  
• Press PLAY/PAUSE  
EN  
to begin or pause  
playback.  
• Press STOP to stop play.  
Notes on CD-R/RW Disc:  
Play and Load Simultaneously  
Do not affix any type of labels to either  
side (recordable or labeled side) of a  
CD-R/RW disc as this may result in the  
unit malfunctioning.  
1. Press OPEN•CLOSE  
to open the tray while  
a CD is playing  
2. Load/change discs for available trays by  
pressing DISC SKIP.  
• To avoid damages to the CD-R/RW disc, do  
not open the disc compartment door while  
the disc is being read.  
3. Press OPEN•CLOSE  
to close the tray.  
• Do not load an unrecorded CD-R/RW disc  
into the unit. This may take a longer time  
to read the disc.  
Skipping a Disc  
Press DISC SKIP to skip to the next disc.  
• Playback capability for CD-RW discs  
may vary due to variations in the  
quality of the CD-RW disc and the  
recorder used to create the disc.  
Skipping Tracks  
Press SKIP BACKWARD  
or SKIP  
FORWARD to skip to the previous or next  
track on the disc.  
Searching Through a CD  
Press and hold SKIP BACKWARD  
Note:  
or SKIP  
Be sure to remove all discs from the disc  
compartment before moving or transporting  
the unit!  
FORWARD  
playing.  
to search through a CD while it is  
Random Playback  
Press  
/ PTY to turn on/off the playing of  
tracks in random order. (Remote Only)  
Loading Discs  
1. Press SOURCE repeatedly to select CD mode.  
2. Press OPEN•CLOSE  
to open the drawer.  
3. Insert up to five discs with label face up. (Press  
DISC SKIP to rotate the disc carrier.)  
4. Press OPEN•CLOSE  
to close the drawer.  
Loaded disc position icon lights.  
7
 
MS2200 EN 11/17/03 1:59 PM Page 13  
CD Player  
Sampling Tracks  
Playing a Program List  
EN  
Press INTRO•CT to play the first 10 seconds of  
each track on the current disc, all discs in the tray,  
or turn INTRO•CT mode off. (Remote Only)  
While in PROGRAM mode, press PLAY/PAUSE  
.
Displaying the Program List  
1. While the CD player is stopped, press  
PROG•SET to enter PROGRAM mode.  
2. Press PROG•SET repeatedly to list each track  
assignment in the program list.  
Note:  
You may also press REPEAT•RDSto select  
1 disc or all discs before activating INTRO  
& MIX functions  
Deleting Program List  
While in PROGRAM mode, press and hold STOP  
for 3 seconds. The system displays the message  
CLEAR.  
Repeat  
Press REPEAT•RDS to repeat the current track,  
current disc, all discs, or turn REPEAT mode off.  
(Remote Only)  
Tips:  
• You can create a program of up to 32  
tracks.  
• Press CD INFO repeatedly to view  
elapsed track time, track number, track  
remain time and disc remain time.  
Setting Up a CD Program  
You can program the CD player to play up to any  
32 tracks on the CDs in the tray.  
1. While the CD player is stopped, press  
PROG•SET to enter program mode. The  
system displays the next available program  
number: “- - P:01,” with “- -” flashing,  
prompts you for the first track in the program  
list.  
Attention:  
Do not push to force closing of the tray  
during CD playback or tray opening.  
5P:01  
2. Press SKIP BACKWARD  
or SKIP  
FORWARD to select a track (press DISC  
SKIP to select a track from a different disc).  
3. Immediately press PROG•SET to assign the  
selected track to the program number. After  
3 seconds, you are prompted for the next track  
in the program list.  
(In CD program mode, PROG icon will be lit.)  
8
 
MS2200 EN 11/17/03 1:59 PM Page 14  
Radio  
Selecting Tuner Band  
1. Press SOURCE to select TUNER.  
Auto Preset Programming  
(FM only)  
EN  
2. Press BAND to select radio band.  
Press and hold the BAND button for 2 seconds to  
scan stations in FM band. The stations will then  
be stored as preset channels. A maximum of 32  
stations can be stored. Beware of your preset  
channels being erased accidentally because the  
scanning and storing process is automatic upon  
pressing the button. You can stop the automatic  
scan by pressing any button, but the erased sta-  
tions cannot be recovered.  
Tips:  
Your audio system has 32 preset stations.  
Tuning to a Station  
Press SKIP BACKWARD  
Manually Setting Presets  
1. Press the TUNE•PRESET button to enter TUNE  
or SKIP FORWARD  
to select frequencies.  
mode.  
2. Press SKIP BACKWARD  
or SKIP  
87.50 MHz  
FORWARD  
to access the desired  
frequency.  
3. Press the PROG•SET button once.  
4. The most recently accessed program location  
will be displayed.  
Using Presets  
5. If a different program location is preferred,  
The tuner can be in either TUNE or PRESET mode.  
When in PRESET mode, the PROG light is on.  
• Press TUNE•PRESET to toggle TUNE and  
PRESET mode.  
• Press SKIP BACKWARD  
FORWARD on the main system or PRESET  
press SKIP BACKWARD  
or SKIP  
FORWARD  
to move to the desired preset  
number (1-32).  
6. Press PROG•SET to store the selected  
frequency at that preset.  
or SKIP  
UP or DOWN on the remote control to access  
the previous or next preset station. The display  
first shows the preset program number and  
after a few seconds, the frequency will be  
displayed. (FMPR:01 is FM preset 1)  
Suppressing Stereo Signal  
Press FM ST. to toggle between FM mono and  
stereo for stereo FM stations. (Remote Only)  
PR:01  
9
 
MS2200 EN 11/17/03 1:59 PM Page 15  
Radio  
You can search for stations using one of the  
following program types:  
• NEWS (news),  
Tuning to an RDS Station  
EN  
• AFFAIR ( news and documentaries),  
• INFO (weather, medical),  
• SPORT (sports),  
• EDUCATE (education),  
• DRAMA (series and plays),  
• CULTURE (religion),  
Note:  
RDS stations broadcast on FM only. When  
the tuner detects an RDS signal, the RDS  
icons turns on.  
• SCIENCE (science and technology),  
• VARIED (miscellaneous),  
• POP M (pop music),  
1. Press TUNE•PRESET to access preset station or  
press SKIP BACKWARD  
or SKIP  
• ROCK M (rock music),  
FORWARD to desired frequency.  
2. If RDS station found, RDS lights on display with  
station name shown.  
• MOR M (middle-of-the road music),  
• LIGHTM (light music),  
• CLASSIC (classical music),  
• OTHERM (unclassified music),  
• WEATHE (weather, medical),  
• FINANC (stock market reports),  
• CHILD (children’s programs),  
• SOCIAL (sociology, history, georgraphy,  
psychology, society),  
Displaying RDS Station Information  
Press CLOCK/RDS on the main unit or  
REPEAT•RDS on the remote control repeatedly  
to display the following:  
• frequency,  
• station name (PS),  
• RELIGI (any aspect of beliefs, faith and God or  
Gods),  
• station type (PTY),  
• clock time (CT), or  
• radio text (RT).  
• PHONE (public forum b phone),  
• TRAVEL (feature and programs concerning  
travelling),  
In CT mode, press the INTRO•CT key to replace  
the displayed time with RDS station time. If clock  
time is not yet set, this information will be set as  
clock time automatically.  
• HOBBY (recreational activities and leisure),  
• JAZZ (jazz music),  
• COUNTR (country music),  
• NATION (national music),  
• OLDIES (oldies music),  
• FOLK M (folk music),  
• DOCUME (documentaries),  
• TEST,  
Searching by Program Type (PTY)  
(Remote Only)  
• ALARM (alarm).  
1. Press  
2. Press  
mode.  
/ PTY to enter PTY selection  
/ PTY repeatedly to select a PTY  
3. Within 5 seconds, press SKIP BACKWARD  
or SKIP FORWARD to search for a  
station broadcasting the selected type of  
program.  
10  
 
MS2200 EN 11/17/03 1:59 PM Page 16  
Tape Player  
From CD  
Playing a Tape  
EN  
1. Insert a tape into the tape deck.  
2. Press SOURCE repeatedly to select CD.  
3. Insert the disc(s) to be recorded.  
4. Select the track, CD, or program to be  
recorded.  
1. Press SOURCE repeatedly to select TAPE.  
2. Press the cassette door to open it.  
3. Insert a tape into the door and push the door  
closed.  
4. Press SKIP BACKWARD  
FORWARD to position the tape to the  
desired starting position.  
or SKIP  
5. Press RECORD to begin recording.  
6. CD begins to play.  
7. Press STOP  
to end recording.  
6. Press PLAY  
to begin playback .  
From an Auxiliary Input  
Tape Counter  
1. Insert the cassette into the tape deck.  
2. Check that the auxiliary device has been  
connected correctly to the GAME •mp3• L / R  
/ AUX IN connector on the front of the audio  
system.  
You can keep track of tape position with the tape  
counter. Press PROG•SET to reset.  
Recording  
From Tuner  
1. Insert a tape into the tape deck.  
2. Press SOURCE repeatedly to select TUNER and  
to access the desired radio band.  
3. Start playback on the auxiliary device.  
4. Press RECORD to begin recording.  
5. Press STOP  
to end recording.  
3. Tune to the station to be recorded.  
4. Press RECORD to begin recording.  
5. Press STOP  
to end recording.  
11  
 
MS2200 EN 11/17/03 1:59 PM Page 17  
Troubleshooting Tips  
EN  
Problem Solution  
Problem Solution  
System will • Check power cord for a secure  
CD sound  
skips  
• Clean the disc.  
not turn  
on  
connection.  
• Check disc for warping,  
scratches, or other damage.  
• Check if something is causing  
the system to vibrate. If so,  
move the system.  
• Make sure the speakers are at  
least 3 feet away or on a  
different surface from the  
main unit.  
• Unplug the unit for a moment,  
and then plug into power  
source again.  
• Check the outlet by plugging in  
another device.  
No sound  
• Increase the volume setting.  
• Check connection to speakers.  
• Check that you have selected  
the appropriate function: CD,  
TAPE, Tuner.  
CD button  
will not  
respond, or  
does not  
change  
• Switch to another function  
(TAPE, Tuner) and then back  
to CD.  
• Make sure mute is off.  
• Make sure headphones are not  
plugged in.  
discs when  
you press  
DISC SKIP  
Poor radio • Check antenna connection.  
reception  
• Move antenna.  
• Turn off nearby electrical  
appliances, such as hair dryer,  
vacuum cleaner, microwave,  
fluorescent lights.  
Remote  
control  
does not  
work  
• Check that the batteries are  
properly installed.  
• Replace weak batteries.  
• Check the system is plugged  
into power source.  
• Point the remote directly at  
the system’s front panel.  
• Move closer to the system.  
• Remove any obstacles  
between the remote and the  
system.  
CD does  
not play  
• Check that CD is in the tray.  
• Check that CD label is facing up.  
• Check that PAUSE mode is not  
on.  
• Check that CD function is  
selected.  
• Use CD lens cleaner.  
• Clean the disc.  
• Try another CD.  
Distorted  
or noisy  
tape  
• Inspect the tape heads, clean it  
if necessary.  
recordings  
12  
 
MS2200 EN 11/17/03 1:59 PM Page 18  
Maintenance  
Disconnect the audio system from the power  
source before performing any maintenance.  
Handling CDs  
EN  
• Do not touch the signal surfaces. Hold CDs by  
the edges, or by one edge and the hole.  
• Do not affix labels or adhesive tapes to the  
label surfaces.  
• Do not scratch or damage the label.  
CDs rotate at high speeds inside the player.  
• Do not use damaged (cracked or warped) CDs  
Cleaning  
Clean the exterior of the system using a soft dust  
cloth.  
CD Player  
CAUTION! This system operates with a laser. It  
Cleaning CDs  
must be opened by only a qualified technician.  
• Dirty CDs can cause poor sound quality. Always  
keep CDs clean by wiping them gently with a  
soft cloth from the inner edge toward the  
outer perimeter.  
If a CD becomes dirty, wet a soft cloth in water,  
wring it out well, wipe the dirt away gently,  
and then remove any water drops with a dry  
cloth.  
• Do not use record cleaning sprays or antistatic  
agents on CDs. Also, never clean CDs with  
benzene, thinner, or other volatile solvents  
which may cause damage to disc surface  
Tape Player  
To prevent deterioration of sound quality, period-  
ically open the door of each deck and clean the  
magnetic heads, pinch roller, and capstan with a  
cotton bud dipped in alcohol. Also, demagnetize  
the head by playing a demagnetizing cassette  
(available through an audio equipment store).  
To protect recordings one  
Side  
A
Protection  
Side  
B
Protection  
or both sides of a tape,  
remove the correspon-  
ding tab. If you later  
want to record on the  
A
B
CD Lens Care  
When your CD lens gets dirty it can also cause the  
system to output poor sound quality. To clean the  
lens you will need to purchase a CD lens cleaner  
which can maintain the output sound quality of  
your system. For instructions on cleaning the CD  
lens, refer to the ones accompanying the lens  
cleaner.  
tape, affix a piece of adhesive tape over the hole.  
Quit Slacking - A little bit of  
slack in your tapes can cause  
scratches on the tape, or  
A
worse yet, the tape could  
break. If you notice some  
slack in the tape, use a pencil  
to tighten it up before you insert it.  
13  
 
MS2200 EN 11/17/03 1:59 PM Page 19  
Important Information  
• Any battery may leak electrolyte under the  
following circumstances:  
Safety Precautions  
EN  
• Never open the cabinet under any  
circumstances. Any repairs or internal  
adjustments should be made only by a trained  
technician.  
- if mixed with a different battery type,  
- if inserted incorrectly,  
- if all batteries are not replaced at the same  
time,  
• Never operate this product with the cabinet  
removed.  
• Do not use your System immediately after  
transporting it from a cold place to a warm  
place, as condensation may cause the system to  
malfunction.  
- if disposed of in fire, or  
- if an attempt is made to charge a battery not  
intended to be recharged.  
Headset Safety  
• Do not play your headset at high volume.  
Hearing experts warn against extended high-  
volume play.  
• If you experience ringing in your ears, reduce  
volume or discontinue use.  
You should use with extreme caution or  
temporarily discontinue use in potentially  
hazardous situations.  
Even if your headset is an open-air designed to  
let you to hear outside sounds, do not turn up  
the volume so high that you are unable to  
hear what is around you.  
• Keep your unit away from humid areas and  
abnormally hot places.  
• Do not touch the player with wet hands. If  
any liquid enters the player cabinet, take the  
player to a trained technician for inspection.  
• This compact disc player uses a laser to read  
the music on the disc. The laser mechanism  
corresponds to the cartridge and stylus of a  
record player. Although this product  
incorporates a laser pick-up lens, it is  
completely safe when operated according to  
directions.  
• Discs rotate at high speed inside the player. Do  
not use damaged, warped, or cracked discs.  
• Do not touch the pick-up lens which is located  
inside the disc compartment. To keep dust  
from collecting on the pick-up lens, do not  
leave the compartment door open for an  
extended period of time. If the lens becomes  
dirty, clean it with a soft brush, or use an air  
blower brush designed for camera lenses.  
• The apparatus shall not be exposed to dripping  
and splashing.  
Don’t Infringe  
This product should only be used for the purposes  
for which it is sold, that is, entertainment, violat-  
ing no copyright law. Any attempts to use this  
product for which it is not intended is unlawful  
and therefore not condoned by Thomson.  
Technical Specification  
Power supply: 230V~50Hz  
Important Battery Information  
• Remove the batteries to avoid leakage if you  
do not use your remote control for more than  
one month.  
• Discard leaky batteries immediately as leaking  
batteries may cause skin burns or other  
personal injuries. Dispose of batteries in the  
proper manner, according to provincial and  
local regulations.  
Dimensions ( H x W x D mm):  
Unit size - 310 x 306 x 390  
Speaker - 310 x 220 x 178  
Tape deck: Response curve: 125Hz-8kHz (-5dB)  
CD player: Response curve (+/- 2dB): 60Hz to 5kHz  
Rating Plate: Look for it at the back of the set.  
14  
 

Tiger Electronic Keyboard 9 008 2 User Manual
Toshiba CRT Television 36HF71 User Manual
Toshiba Laptop X75 A User Manual
Toshiba Personal Computer M505 User Manual
TP Link Stereo Amplifier P912A User Manual
Tricity Bendix Oven BS 613 2 User Manual
Troy Bilt Snow Blower Two Stage Snow Thrower User Manual
Uniden Cordless Telephone DX8200 User Manual
VTech Cordless Telephone VT 9115 User Manual
Waterford Appliances Stove T25 LP User Manual