Toshiba Camcorder CS3330BI User Manual

CCD Monochrome  
Video Camera  
CS3330Bi  
SERIES  
CS3330Bi  
CS3330BLi  
Specification  
CONTENTS  
Before use – General safety instructions  
1. PRODUCT DESCRIPTION……..................................................................  
2. FEATURES...................................................................................................  
3. CONSTITUTION...........................................................................................  
1
1
1
4. SPECIFICATIONS  
4-1 Mechanical specifications............................................................................  
4-2 Electrical specifications................................................................................  
2
2
5.APPEARANCES  
5-1 Appearance of the camera head..................................................................  
5-2 Appearance of the camera head with mount metal fitting..............................  
5-3 Appearance of the camera control unit for CCD camera (CS3330Bi)…….…  
5-4 Appearance of the camera control unit for CCD camera (CS3330BLi)……...  
5
6
7
8
This specification subjects to change without notice.  
D4134992A  
 
Handling Precautions  
WARNING  
Immediately cease use of the equipment in the event of abnormality or malfunction.  
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign  
matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.  
If such abnormalities occur, disconnect the power plug from the outlet and contact your sales  
representative.  
unplug  
Do not use the equipment in locations subject to water splashes.  
Otherwise, fire or electric shock may result.  
Do not get wet  
Never pull apart  
Do not disassemble, repair, or modify the equipment.  
Otherwise, fire or electric shock may result.  
For internal repair, inspection, or cleaning, contact your sales representative.  
Do not place anything on the equipment.  
If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock  
may result.  
Avoid  
Avoid  
Do not install the equipment in an unstable or inclined location or locations subject to  
vibration or impact.  
Otherwise, the equipment may topple over and cause personal injury.  
During an electrical storm, do not touch the power cord or connection cable.  
Otherwise, an electric shock may result.  
Do not touch  
Instruction  
Avoid  
Use the specified power supply.  
Use of an unspecified power supply may result in fire or electric shock.  
Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,  
places under heavy objects or heated the power cord, connection cable.  
Otherwise, fire or electric shock may result.  
This specification subjects to change without notice.  
D4134992A  
 
CAUTION  
Observe the following when installing the equipment:  
· Do not cover the equipment with a cloth, etc.  
· Do not place the equipment in a narrow location where heat is likely to accumulate.  
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.  
Instruction  
Do not place the equipment in locations subject to high moisture, oil fumes, steam, or  
dust.  
Otherwise, fire or electric shock may result.  
Avoid  
Avoid  
Do not install the equipment in locations exposed to direct sunlight or humidity.  
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.  
Use only specified AC power cables and connection cables.  
Otherwise, fire or electric shock may result.  
Avoid  
When performing connection, turn off power.  
When connecting the power cable or connection cable, turn off the equipment power.  
Otherwise, fire or electric shock may result.  
Avoid  
Do not expose its camera head to any intensive light (such as direct sunlight).  
Otherwise, its inner image pickup devise might get damaged.  
Avoid  
Avoid short-circuiting signal output.  
Otherwise, a malfunction may occur.  
Avoid  
Avoid giving a strong shock against the camera body.  
If your camera is used in a system where its camera connector is subjected to strong repetitive  
shocks, its camera connector is possible to break down. If you intend to use your camera in  
such a situation, if possible, bundle and fix a camera cable in the place near the camera, and do  
not transmit a shock to the camera connector.  
Avoid  
Contact your sales representative to request periodic inspection and cleaning (every  
approx. five years).  
Accumulation of dust inside the equipment may result in fire or electric shock.  
For inspection and cleaning costs, contact your sales representative.  
Instruction  
This specification subjects to change without notice.  
D4134992A  
 
CASES FOR INDEMNITY (LIMITED WARRANTY)  
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the  
user in the following cases.  
In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,  
deliberate or accidental misuse by the user, or use under extreme operating conditions.  
In the case of indirect, additional, consequential damages (loss of business interests, suspension of business  
activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from  
responsibility for such damages.  
In the case damage or losses are caused by failure to observe the information contained in the instructions in  
this instruction manual and specifications.  
In the case damage or losses are caused by use contrary to the instructions in this instruction manual and  
specifications.  
In the case damage or losses are caused by malfunction or other problems resulting from use of equipment or  
software that is not specified.  
In the case damage or losses are caused by repair or modification conducted by the customer or any  
unauthorized third party (such as an unauthorized service representative).  
Expenses we bear on this product shall be limited to the individual price of the product.  
About the item which does not have a publication in the specifications and manual of this product, it  
considers as the outside for a guarantee.  
RESTRICTION FOR USE  
Should the equipment be used in the following conditions or environments, give consideration to safety  
measures and inform us of such usage:  
1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.  
2. Use of the equipment in applications expected to cause potential hazard to people or property, which  
require special safety measures to be adopted.  
This product can be used under diverse operating conditions. Determination of applicability of equipment or  
devices concerned shall be determined after analysis or testing as necessary by the designer of such  
equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the  
performance and safety of the equipment or devices.  
This product is not designed or manufactured to be used for control of equipment directly concerned with  
human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety  
(*2). Therefore, the product shall not be used for such applications.  
(*1): Equipment directly concerned with human life refers to:  
· Medical equipment such as life-support systems, equipment for operating theaters.  
· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.  
· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or  
Building Standard Law  
· Equipment related to the above  
(*2) Equipment relating to maintenance of public services/functions involving factors of safety refers to:  
· Traffic control systems for air transportation, railways, roads, or marine transportation  
· Equipment for nuclear power generation  
· Equipment related to the above  
This specification subjects to change without notice.  
D4134992A  
 
Usage Precautions  
Handle carefully  
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause  
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.  
Environmental operating conditions  
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.  
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular,  
do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high  
temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera  
conditions (such as increased gain). However, such phenomena are not malfunctions.  
Do not shoot under intense light.  
Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If  
intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.  
Occurrence of moiré  
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.  
Do not expose the camera’s image-pickup-plane to sunlight or other intense light directly.  
Its inner CCD (charge-coupled device) might be damaged.  
Occurrence of noise on the screen  
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may  
be generated on the screen. If this occurs, move the camera or the cable.  
Handling of the protective cap  
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.  
If the equipment is not to be used for a long duration  
Turn off power to the camera for safety.  
Maintenance  
Turn off power to the equipment and wipe it with a dry cloth.  
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted  
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may  
damage or discolor the paint and indications.  
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.  
Disposal  
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with  
the laws and regulations of your country and/or municipality concerning environmental contamination.  
This specification subjects to change without notice.  
D4134992A  
 
1. PRODUCT DESCRIPTION  
Model CS3330Bi/BLi is monochrome video camera with charge coupled device (CCD). These  
cameras are composed of camera head and camera controller (CCU).  
2. FEATURES  
The video cameras have the following technical features.  
(1) High resolution  
A 380,000 pixel CCD incorporated in the unit provides horizontal resolution of 570 lines.  
(2) High reliability  
Realize extremely low graphic distortion and after-images levels. Offers high reliability, high  
stability, long life and resistance against impact and vibration.  
(3) Compact and light weight  
The camera head and camera control unit are separately designed. The camera head is designed  
to minimize use of parts and is ultra-compact and light weight.  
(4) External synchronization  
The unit is automatically switched over between internal and external synchronization. When  
HD and VD signals are input from an external device, the external synch is automatically set  
and HD and VD signals are output.  
(5) Electronic shutter  
Variable speed electronic shutter (TV sync) with 8 steps from 1/60sec to 1/10,000sec. (standard  
feature)  
(6) Electronic lines display (CS3330BLi)  
Video signals can be overlapped using two sets of vertical and horizontal lines which are  
displayed as electronic lines on the monitor. In addition, there is also an option of displaying a  
reticle mark on the monitor to conveniently position and size up the images.  
3. CONSTITUTION  
Camera head without lens  
( includes 3m camera cable )  
Camera control unit (CCU)  
Accessories  
1 set  
1 set  
1 set  
(1)Video cable  
(3C-2V ,with BNC plug on both ends 0.5m)  
(2) AC cable(2.0m)  
1 set  
2 set  
(3) Fuse(0.5A / 250V)  
(4) Camera head mount metal fitting  
(5) Lens mount screw  
1 set  
1 set  
(6) adapter(3P-2P)  
1 set  
(7) Operation manual (this document)  
1 copy  
1
This specification subjects to change without notice.  
D4134992A  
 
4. SPECIFICATION  
4-1 Mechanical specifications  
Overall dimensions and weight  
Camera head:  
Refer to the attached camera head diagram.  
Camera control Unit:  
220(w) x 60(H) x 240(D) mm (excluding rubber casters)  
Mass : approx. 2.6 kg  
Camera cable:  
Lens mount:  
6.3mm(dia.) x 3 m length  
C mount  
4-2 Electrical specifications  
TV system:  
Based on EIA standard  
Pickup Device:  
Effective pixels:  
Unit cell size:  
Sensing area:  
Interline transfer CCD ICX422AL  
768(H) x 494(V) pixels  
11.6(H) x 13.5(V) micro m  
8.8(H) x 6.6(V) mm  
(Equivalent to type-2/3 normal optical image  
size respectively.)  
Scanning method:  
Sync. system:  
525 lines, 2:1 interlace  
automatic switching between  
internal / external synchronization  
Scanning frequency:  
Aspect rate:  
horizontal;  
Vertical;  
4:3  
15.734kHz  
59.94Hz  
Subject illumination:  
Standard:  
100 lx, F4(3100K),(AGC OFF, gamma=1.0)  
0.3 lx, F1.4,(gamma=0.45 with maximum gain)  
VS: 1.0V(p-p)/ 75 ohm  
570 TV lines  
350 TV lines  
Minimum:  
Video output:  
Horizontal resolution:  
Vertical resolution:  
S/N:  
56dB (AGC OFF, gamma=1.0 )  
External sync input:  
Input level:  
2 to 6 V(p-p) for both HD and VD signals  
1 k ohm for both HD and VD signals  
2:1 interlace  
Input impedance:  
Method:  
Polarity:  
Negative  
Pulse width:  
HD:  
VD:  
6.4 +/- 3 micro sec  
150 to 800 micro sec  
Repeat frequency:  
Scanning lines:  
f
H
v
=15.734 kHz±2%  
=2 fH/525  
f
525 lines  
2
This specification subjects to change without notice.  
D4134992A  
 
Phase difference:  
The phase difference between the trailing edge  
of VD and the trailing edge of HD must be as  
shown below.  
1st field  
2nd field  
VD  
HD  
t2=1/fH/2 +/-5 micro sec  
t10+/-5 micro sec  
Output signal:  
HD,VD negative polarity  
Level:  
3.5 to 4.5V(p-p) / 1k ohm terminated  
8.0 to 9.0V(p-p) / high  
Pulse width:  
Repeat frequency:  
HD:  
VD:  
6.36±0.5 micro sec  
572±5 micro sec  
fH  
v
=15.73426 kHz  
=2 fH/525  
f
Scanning lines:  
Output circuit:  
525 lines  
+9V  
1k ohm  
HD  
VD  
TD62504F  
Electronic line display or reticle (CS3330BLi ONLY  
)
NO. of lines:  
Movable range:  
Line width:  
2 horizontal lines, 2 vertical lines  
Entire monitor screen  
Horizontal line: 1 scanning line/field  
Vertical line:  
approx. 0.5 micro sec  
Polarity :  
White(POSI) / black(NEGA) selectable  
switching  
ON/OFF:  
Electronic line / reticle:  
Internal selector switch  
(Factory preset is electronic line.)  
0.45/1 selectable  
Gamma:  
AGC:  
ON/OFF switching  
3
This specification subjects to change without notice.  
D4134992A  
 
Electronic shutter:  
(TV synchronization):  
Shutter speed:  
ON/OFF switching  
Selectable at 1/60sec, 1/125sec, 1/250sec,  
1/500sec, 1/1,000sec, 1/2,000sec,1/4,000sec,  
1/10,000sec and flicker less  
(during exposure):  
CCD operation mode:  
Power supply:  
frame store mode  
AC100V +/-10%, 50/60Hz,150mA ± 20%  
Ambient condition:  
Temperature:  
Humidity:  
From 0 through 40 degrees  
From 30 through 90% (No condensing)  
4
This specification subjects to change without notice.  
D4134992A  
 
5. APPEARANCES  
5-1 Appearance of the camera head  
5
This specification subjects to change without notice.  
D4134992A  
 
5-2 Appearance of the camera head with mount metal fitting  
Specifications  
Material:  
Lens mount:  
Stainless steel  
Frame, cover:  
Mount metal fitting:  
Aluminum alloy  
Aluminum alloy  
Finish coating:  
Frame, cover:  
Mount metal fitting:  
Black alumite finish  
Elidite finish  
C mount  
Cover  
Frame  
Lens mount  
Mount metal fitting  
2-M3 depth:6  
1/4-20 UNC depth:6  
6
This specification subjects to change without notice.  
D4134992A  
 
5-3 Appearance of the camera control unit for CCD camera (CS3330Bi)  
7
This specification subjects to change without notice.  
D4134992A  
 
5-4 Appearance of the camera control unit for CCD camera (CS3330BLi)  
8
This specification subjects to change without notice.  
D4134992A  
 

TERK Technologies Stereo System AM FM Tower Powered Indoor Antenna User Manual
THORENS Turntable TD 850 User Manual
Topcom MP3 Player II 128 User Manual
Toshiba CRT Television 36AF62 User Manual
TP Link Network Router TD W8970N User Manual
Trango Broadband Network Router TrangoLink 10 User Manual
Tripp Lite Surge Protector SPS415HGULTRA User Manual
Tripp Lite TV Cables A060 012 User Manual
Venturer Computer Monitor AVM670 User Manual
Viking Gas Grill VGBQ300 User Manual