Toshiba Universal Remote RBC AS21UL User Manual

REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE)  
Owner’s Manual  
Remote Controller  
Model name:  
Simple wired remote  
controller  
RBC-AS21UL  
TEST  
S
E
TT  
IN  
G
°C  
°F  
Owner’s Manual  
Remote controller for air  
conditioner (Split type)  
English  
1
9
Manuel du proprietaire  
Télécommande pour  
climatiseur (Type split)  
Français  
 
Owner’s Manual  
Simple wired remote controller  
1
PRECAUTIONS FOR SAFETY  
WARNING  
WARNINGS ABOUT INSTALLATION  
• Make sure to ask the qualified installation professional in electric work to  
install the remote controller.  
If the remote controller is inappropriate installed by yourself, it may cause,  
electric shock, fire, and so on.  
• Make sure to install the air conditioner specified by TOSHIBA/Carrier and ask  
the exclusive dealer when installing. If the air conditioner is installed by  
yourself, it may cause electric shock or fire, etc.  
WARNINGS ABOUT OPERATION  
• Prevent any liquid from falling into the remote controller.  
Do not spill juice, water or any kind of liquid.  
It may cause machine failure, electric shock or fire, etc.  
• When you are aware of an error with the air conditioner (smells like something  
burning etc.), immediately turn off the circuit breaker to stop the air  
conditioner, and make contact with the dealer. If the air conditioner is  
continuously operated with something abnormal, it may cause malfunction,  
electric shock, fire, and so on.  
WARNINGS ABOUT MOVEMENT AND REPAIR  
• Do not repair any unit by yourself.  
Whenever the air conditioner needs repair, make sure to ask the dealer to do  
it. If it is repaired imperfectly, it may cause electric shock or fire, etc.  
• When reinstalling the air conditioner, contact with the dealer.  
If the installation is insufficient, it may cause electric shock or fire, etc.  
EN  
– 2 –  
2-EN  
 
Owner’s Manual  
Simple wired remote controller  
CAUTION  
CAUTIONS ABOUT INSTALLATION  
• Do not install the remote controller in a place where its signals do not reach  
the indoor unit.  
• Do not install the remote controller in a place under the direct sunlight or close  
to any heat source. It may cause malfunction.  
The fluorescent lamp with rapid start system or inverter system may disturb  
the signal reception. For the details, contact with the dealer of the air  
conditioner whom you have purchased it from.  
CAUTIONS ABOUT OPERATION  
• Do not drop or apply strong shock to the remote controller.  
It may cause malfunction of the remote controller.  
• Use batteries that meet the specifications.  
– 3 –  
3-EN  
 
Owner’s Manual  
Simple wired remote controller  
2
PART NAMES AND FUNCTIONS  
Max. 8 indoor units can be operated by a remote controller.  
Push each button to select a desired operation.  
The details of the operation needs to be set up once, afterward, the air  
conditioner can be used by pushing ON/OFF button only.  
Illustration of LCD shown below is for explanation. It may differ from the  
actual LCD.  
SETTING  
4
1
2
3
5
6
7
1 Fan Speed button  
2 Mode button  
7 Remote control temperature  
sensor  
Usually controlled by the indoor unit  
sensor, it can be changed to the  
remote controller. For details,  
contact the shop which you  
purchasedtheair conditioner. (When  
using a group control method, do not  
use the remote controller sensor.)  
3 Swing/Air direction button  
The louver angle is changed.  
4 Setup temperature button  
Adjust the set point.  
Set the desired set point by pushing  
or  
.
5
ON/OFF button  
6 Check button (Used in  
EN  
servicing)  
Do not use this button usually.  
– 4 –  
 
4-EN  
Owner’s Manual  
Simple wired remote controller  
8
16  
11  
12  
13  
9
10  
SETTING  
14 15  
8 Operation mode  
13 Error code display  
Error code is displayed when an  
error occurs.  
The selected operation mode is  
displayed.  
While  
is displayed, the indoor fan  
14 Fan speed display  
stops or the mode is Low speed  
mode.  
Selected fan speed,  
,
,
or  
is displayed.  
9 Test run display  
15 Remote controller sensor  
Displayed during a test run.  
display  
10 Error display  
Displayed while the sensor of the  
remote controller is used.  
Displayed while the protective device  
works or an error occurs.  
16 Pre-heat display  
11  
is displayed during the  
operation.  
Displayed when the heating mode is  
energized or defrost cycle is initiated.  
While this indication is displayed, the  
indoor fan stops.  
If the remote controller setting is  
prohibited by the central remote  
controller,  
flashes when [ON/  
OFF], [Mode] or [Setup temperature]  
button is pushed and change is not  
accepted.  
• When turning on the power switch of  
the simple operation type remote  
SETTING  
controller at the first time,  
,
SETTING  
12 Set temperature display  
The selected set temperature is  
displayed.  
flashes. While  
, is displayed,  
the automatic model check is  
operating.  
Operate the remote controller after  
SETTING  
has  
, disappeared.  
– 5 –  
 
5-EN  
Owner’s Manual  
Simple wired remote controller  
3
HOW TO OPERATE INDOOR UNIT  
(During FAN mode, the fan speed is  
not automatically changed.)  
COOL/HEAT AUTO  
,
HEAT , DRY  
COOL , FAN  
,
4 Push either  
or  
to select  
a desired temperature.  
During FAN mode, the temperature  
cannot be set up.  
Power supply  
Turn on the power supply switch  
12 hours before starting operations.  
After the power supply has been  
turned on, the operation of the remote  
controller is not accepted for  
approximately 1 minute. It is not a  
failure.  
5 Stop  
Push  
, (ON/OFF) button.  
When using the remote controller to  
stop the unit, the outdoor unit fan  
may keep operating for a while even  
if the compressor of the outdoor unit  
has stopped.  
(The sensor receives the signal once,  
but the received contents are cleared.)  
• In heating, if the room is not  
comfortably heated with FAN  
select FAN or  
,
.
Although they are displayed, the  
function may not be provided  
depending on the using indoor unit.  
(Fan speed is constant.)  
• When the unit cannot be stopped  
by the normal operation.  
4
3
2
Turn off the power switch or circuit  
breaker, and then contact the shop  
which you purchased the unit.  
1
5
1 Push  
(ON/OFF) button.  
2 Push (Mode) button to select  
operation to  
.
,
,
,
or  
3 Push  
select fan speed mode.  
When selecting , fan speed is  
automatically changed.  
(Fan Speed) button to  
EN  
– 6 –  
 
6-EN  
Owner’s Manual  
Simple wired remote controller  
Automatic Cool/Heat  
When all indoor units in the identical  
refrigerant system are controlled as a  
group, the cooling or heating operation  
is automatically performed with the  
difference between the setup  
temperature and the room  
temperature.  
Dry operation  
Dry function may not be provided  
depending on the using indoor unit,  
even if Dry ( ) is displayed on the  
LCD of the remote controller. (The  
same to Cooling operation)  
When the room temperature  
approaches the setup temperature,  
it automatically repeats to ON/OFF  
operations.  
In order not to return humidity to the  
room as possible, the mode of  
indoor fan changes to LOW when  
the operation has stopped.  
The fan speed may not be  
adjustable depending on the using  
indoor unit or the room temperature.  
The Dry mode may not be available  
depending on the using indoor unit  
when the outdoor temperature is  
59 °F (15 °C) or lower.  
– 7 –  
 
7-EN  
Owner’s Manual  
Simple wired remote controller  
MEMO  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
.......................................................................  
EN  
– 8 –  
8-EN  
 
85464609011000  
(EH99677101)  
 

Taylor Scale 3847BL User Manual
Technicolor Thomson Network Router TG784 User Manual
Texas Instruments Laptop 5000 User Manual
Topcom Automobile Accessories SMC 3000 User Manual
TP Link Network Card TL WN827N User Manual
Tripp Lite TV Cables P167 000 User Manual
Vermont Casting Indoor Fireplace DEF User Manual
ViewSonic Flat Panel Television VS12413 User Manual
Viking Home Security System the aes 2000 accessible entry system User Manual
VXI Headphones TP150 User Manual