Project
Quantity
Item #
Model Specified:
CSI Section 11400
G-Series Pass-Thru Solid Door
Refrigerators/Self-Contained
One & Two Section Models, 32" Deep
Aside from their anodized aluminum side and interior finishes,
Traulsen’s G-Series "Dealer's Choice" models meet or exceed the
standard specifications and performance of most other brands top
tier product offerings. Reliable, energy efficient, and durable, with
large individual storage capacities, the high quality G-Series line-up
includes a wide range of one and two section pass-thru refrigerator
models, built in our most popular footprints. They are available with
either full or half height doors, and the added convenience of a
variety of different door hingings to choose from. In addition, each
also includes a number of user-friendly features, making them one
of the best overall equipment values in Foodservice today, and the
right fit for nearly any commercial application.
G
Equipped with an
easy to use
microprocessor
control!
SERIES
Stainless Steel
Front & Door(s)
AVAILABLE MODELS
*Door hinging when viewed from that side.
Single Section Models
Control Side Other Side
Two Section Models
Control Side Other Side
Model #
Door Hinging
Hinging*
Right
Left
Model #
Door Hinging
Hinging*
Left/Right
Left/Left
G10002P Half Right
G10003P Half Right
G10004P Half Left
G10005P Half Left
G10012P Full Right
G10013P Full Right
G10014P Full Left
G10015P Full Left
G20004P Half Left/Right
G20005P Half Left/Left
G20006P Half Right/Left
Left
Right/Left
Right
Right
Left
Left
Right
G20007P Half Right/Right Right/Right
G20014P Full Left/Right
G20015P Full Left/Left
G20016P Full Right/Left
Left/Right
Left/Left
Right/Left
Model G20004P
Model G10012P
G20017P Full Right/Right Right/Right
Standard Product Features
Optional Accessory Kits
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High Quality Stainless Steel Exterior Front and Doors
Corrosion Resistant Anodized Aluminum One-Piece Sides
Durable Anodized Aluminum Interior
•
•
Additional Epoxy Coated Shelves*
No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)
Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.
Chrome Plated Shelves* (for use in lieu of standard shelving)
6" High Adjustable Legs (for use in lieu of standard casters)
Two Year Service/Labor Warranty Available
Microprocessor Control With LED Temperature Readout
Top-Mounted, Balanced, Self-Contained Refrigeration System
Large High Humidity Evaporator Coil Outside The Food Zone
Load-Sure Guard Protects Against Improper Loading
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handles
Automatically Activated Incandescent Lights
Damage Resistant Stainless Steel Breaker Caps
Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
Energy Saving Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In Door Gaskets
•
•
•
•
•
*Please refer to spec sheet 4-7 for
optional accessory kit details
•
•
•
•
•
NOTE: All optional accessory kits are shipped separately for
later installation by others at the jobsite.
Gasket Protecting Anodized Aluminum Door Liner
Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times
•
•
•
•
•
Stainless Steel One-Piece Louver Assembly
9' Cord & Plug Attached
Set of Four (4) 6" High Casters With Locks
One Year Parts And Labor Warranty
Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Approval: __________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
4-5
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Plan
G20004P
G20014P
Plan
G20005P
G20015P
Section View
All Half Height Door Models
Plan
G20006P
G20016P
Plan
G20007P
G20017P
Section View
All Full Height Door Models
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
4-5
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation
Refrigeration System
Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
included.
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, large, high humidity evaporator coil located outside the food
zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 34 to 38°F.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.
Controller
The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.
Interior
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs.
Both the cabinet and doors are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Warranties
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
1-Section Models
25.6 (719 cu l)
297⁄8 (75.9 cm)
3715⁄16 (96.4 cm)
32 (81.3 cm)
2-Section Models
48.8 (1371 cu l)
521⁄8 (132.4 cm)
3715⁄16 (96.4 cm)
32 (81.3 cm)
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available.
Depth - over body in.
Depth - doors open 90° in. 833⁄8 (211.8 cm)
Clear door width in.
211⁄8 (53.6 cm)
Clear half-door height in. 271⁄2 (69.9 cm)
Clear full-door height in.
575⁄8 (146.3 cm)
Height-overall on 6" casters 831⁄4 (211.5 cm)
833⁄8 (211.8 cm)
211⁄8 (53.6 cm)
271⁄2 (69.9 cm)
575⁄8 (146.3 cm)
831⁄4 (211.5 cm)
6
No. Standard Shelves
Shelf area sq. ft.1
ELECTRICAL DATA
Voltage
3
18.8 (1.75 sq m)
34.6 (3.21 sq m)
115/60/1
115/60/1
Feed wires with Ground
Full load amperes
REFRIGERATION DATA
Refrigerant
3
3
4.7
7.3
R-134a
1520 (1⁄4 HP)
R-134a
2410 (1⁄3 HP)
BTU/HR H.P.2
SHIPPING DATA
Length - crated in.
Depth - crated in.
Height - crated in.
Volume - crated cu. ft.
Net Wt. lbs.
35 (89 cm)
63 (160 cm)
43 (109 cm)
831⁄2 (212 cm)
131 (3711 cu l)
450 (204 kg)
590 (268 kg)
43 (109 cm)
831⁄2 (212 cm)
71 (2011 cu l)
305 (138 kg)
395 (179 kg)
Gross Wt. lbs.
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1=
Figure shown reflects the area of standard shelf compliment plus the additional storage area available on
the cabinet bottom.
2=
Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet
13-2.
Equipped With One NEMA 5-15 P Plug
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35885 (revised 6/08)
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
4-5
|