Tripp Lite Power Supply 200204171 93 2036_EN User Manual

Owner’s Manual  
Line Conditioners  
(230V, 50/60Hz)  
Important Safety Instructions  
Quick Installation  
Basic Operation  
2
3
3
4
4
Service & Warranty  
Specifications  
5
9
Español  
Français  
1111 W. 35th Street Chicago, IL 60609 USA  
Copyright © 2002 Tripp Lite. All rights reserved.  
 
Quick Installation  
1
Connect your equipment to  
the line conditioner, and the  
line conditioner to an  
electrical outlet.  
1) Unplug your computer’s power cord  
from both your AC outlet and your  
computer’s AC input.  
A
B
1
2
2) Insert the line conditioner’s cord’s (A)  
female plug into your computer’s AC  
input. Insert its male plug into any of  
the line conditioner’s output receptacles.  
3) Insert the female plug of your  
computer’s cord (B) into your line  
conditioner’s AC input. Insert its male  
plug into your AC outlet.  
2
3
Plug your computer and  
electronics into your line  
conditioner’s outlets.  
Turn your line conditioner’s  
power switch on.  
3
Basic Operation  
Indicator Lights  
Your line conditioner has up to 3 indicator lights. All indicator light descriptions apply when the  
line conditioner is plugged into a wall outlet and turned on. Note: As the line conditioner  
corrects high or low input voltage, the unit will make a gentle clicking sound. The frequency of  
the clicking will depend on the quality of the utility power in your particular area. The clicking  
is normal, and no action is required on your part.  
BOOST (Multiple LED Models Only): This yellow light will turn  
ON whenever your line conditioner is boosting low AC line voltage up  
to nominal voltage levels.  
Boost  
Normal  
Trim  
NORMAL (Multiple LED Models Only): This green light will turn  
ON whenever your line conditioner is receiving normal AC line  
voltage.  
TRIM (Multiple LED Models Only): This yellow light will turn ON  
whenever your line conditioner is trimming high AC line voltage down  
to nominal voltage levels.  
 
3
continued  
Basic Operation  
Other Line Conditioner Features  
Lighted Power Switch/Input Breaker  
Flip this switch to ON to activate power at the line conditioner’s  
receptacles. This switch will light up when the line conditioner is  
plugged in and turned on. This switch will trip to prevent dangerous  
input voltage from damaging the line conditioner. If this happens, wait  
for the line conditioner to cool, then flip the switch back to reset the  
breaker.  
AC Receptacles  
These IEC 320F receptacles provide your connected equipment with  
AC line power during normal operation. They adjust incoming voltage  
to provide equipment with nominal 230V power. These receptacles  
also protect your equipment against damaging surges and line noise,  
eliminating the need for external surge suppression.  
Service & Warranty  
If returning your line conditioner to Tripp Lite or an authorized Tripp Lite service center,  
please carefully pack it using the ORIGINAL PACKING MATERIAL that came with the unit.  
Enclose a letter describing the symptoms of the problem. If the line conditioner is within the  
warranty period, enclose a copy of your sales receipt.  
2-Year Limited Warranty  
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two  
years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or  
replacing (at its sole option) any such defective products.To obtain service under this warranty, you must obtain  
a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.  
Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation  
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date  
and place of purchase.This warranty does not apply to equipment which has been damaged by accident, negligence  
or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser  
who must have properly registered the product within 10 days of purchase.  
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some  
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)  
may not apply to the purchaser.  
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,  
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any  
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data,  
costs of substitutes, claims by third parties, or otherwise.  
Specifications  
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.  
Model  
Series  
LR604  
AGLR600Q2  
Nominal Voltage:  
Input Frequency:  
Input Voltage Range:  
Output Capacity (VA/Watts):  
Approvals:  
230 volts  
50/60 Hz  
179 - 270 volts  
600/600  
CE  
ALL UNITS: AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>20 dB at 1MHz);  
AC Protection Modes (H to N).  
 
4
1111 W. 35th Street, Chicago, IL 60609 USA  
773.869.1234 (USA) • 773.869.1212 (International)  
200204171 93-2036_EN  
 

Telex Portable Speaker 18BX User Manual
Toshiba Car Video System TR 2010E User Manual
Toshiba DVD Player SD K860 User Manual
Toshiba Printer Black White MFP User Manual
Trane Heat Pump 2TWB0 UM 2 User Manual
Transition Networks Switch CPSMC0800 100 User Manual
Vent a Hood Ventilation Hood XR9 XRH9 User Manual
Verilux Indoor Furnishings VD08 User Manual
Vermont Casting Indoor Fireplace RHE25 User Manual
Weber Burner 89796 User Manual