Tripp Lite Power Supply APSX750F User Manual

Tripp Lite  
1111 West 35th Street  
Chicago, IL 60609 USA  
Telephone: +(773) 869 1234  
Model #: APSX750F  
230V PowerVerter APS X Series Inverter/Charger - with Fast Auto-Transfer Switching  
Highlights  
12V DC or 230V AC input; 230V, 50 Hz output; 2 AC outlets  
750 watts continuous, 1125 watts OverPower and 1500 watts DoubleBoost  
inverter output (see specifications)  
3-stage, selectable 5/20 amp, wet/dry cell battery charger  
Faster Auto Transfer Switching option for battery backup/UPS operation  
Reliability enhanced large-transformer design with protected DC terminals  
Description  
Tripp Lite's APSX750F DC-to-AC inverter with faster automatic line-to-battery transfer and integrated charging system serves as an extended run  
UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V  
battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and  
DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold  
start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected  
equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts  
and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals  
for simple installation (user supplies batteries and cabling - see Owner's Manual for recommendations). Passes sine wave utility or generator power  
during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large  
transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current  
needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous  
status information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly  
adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery  
power transfer voltages.  
Applications  
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion  
vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an  
uninterruptible power supply (UPS) for items compatible with a 10 millisecond transfer time.  
Package Includes  
APSX750F Inverter/Charger  
Owner's Manual with warranty information  
(1) IEC Universal Outlet Adapter  
Features  
APSX750 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger  
Supports 230V AC output from a 230V AC line power source or 12V DC battery source  
 
Recommended  
Electrical Service  
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full  
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive  
applications, professional hardwire.  
Maximum input  
amps / watts  
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A  
max charger-only/combined input load to support charger and AC output is automatically controllable to 66%-33%-0%  
based on AC output loading.  
BATTERY  
Expandable battery  
runtime  
Runtime is expandable with any number of user supplied wet or gel type batteries.  
12V  
DC system voltage  
Battery recharge rate Selectable 5/20 amp  
LEDS ALARMS & SWITCHES  
Front panel LEDs  
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7  
levels reported). See manual for sequences.  
Switches  
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off  
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.  
SURGE / NOISE SUPPRESSION  
AC surge  
840 joules AC surge suppression included.  
suppression  
PHYSICAL  
Shipping weight (lbs) 20  
Shipping weight (kg)  
9.1  
Shipping  
12.5 x 11 x 10.75  
Dimensions (HWD/in)  
Shipping  
31.8 x 27.9 x 27.3  
Dimensions  
(HWD/cm)  
Unit weight (lbs)  
Unit weight (kg)  
18.6  
8.3  
Unit Dimensions  
(HWD/in)  
7 x 8.75 x 9  
Unit Dimensions  
(HWD/cm)  
17.8 x 22.2 x 22.8  
Polycarbonate  
Material of  
construction  
Form factors  
supported  
Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting  
information)  
Cooling method  
Multi-speed fan  
Style  
Heavy-duty with built-in battery charger  
ENVIRONMENTAL  
Relative Humidity  
0-95% non-condensing  
LINE / BATTERY TRANSFER  
Transfer time from  
line power to battery  
mode  
Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and  
networking equipment - verify transfer time compatibility of loads for UPS applications)  
Low voltage transfer  
to battery power  
Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage  
drops to 144V (user adjustable to 163, 182, 201V - see manual)  
High voltage transfer In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272  
to battery power  
SPECIAL FEATURES  
Appearance  
Black color  
 
Remote control  
capability  
Yes  
BATTERY PACK ACCESSORY (optional)  
Battery Pack  
98-121 sealed lead acid battery (optional)  
Accessory (optional)  
CERTIFICATIONS  
Certifications  
WARRANTY  
RoHS Compliant  
Product Warranty  
Period  
(Outside the U.S. and Canada, call for warranty information)  
Related Items  
External Battery Housings  
BP-260  
Ideal battery housing for use with Tripp Lite PowerVerter APS inverter/charger systems with a Qty: [optional]  
12 or 24V DC system voltage.  
Replacement Batteries  
98-121  
12V DC Sealed, Maintenance-Free Battery - For all PowerVerter models which accept 12V  
DC input  
Qty: [optional]  
More information, including related products, owner's manuals, and additional technical specifications, can be found online at  
©2009 Tripp Lite. All Rights Reserved.  
 

Texas Instruments Switch XIO3130 EVM User Manual
Toastmaster Oven XO 1MSS User Manual
Toshiba Computer Hardware TX39 User Manual
Tricity Bendix Dishwasher DH041 User Manual
ViewSonic Flat Panel Television VX924 User Manual
Viking Refrigerator VIRB364 User Manual
Vivitar Camcorder 990HD User Manual
Vizio TV Mount VMT37 60S User Manual
Vulcan Hart Convection Oven GCO2C ML 114571 User Manual
Wagner SprayTech Paint Sprayer 558020 User Manual