Tripp Lite Switch B020 U08 19 K User Manual

Quick Start Guide  
NetDirector Console KVM Switch  
(8- or 16-Port)  
or Rackmount KVM Switch (16-Port)  
Models: B020-U08-19-K, B020-U08-19KTAA, B020-U16-19-K or B022-U16  
This Quick Start Guide will take you through basic installation, configuration and local  
operation. For more detailed information, refer to the Owner’s Manual on the CD-ROM.  
This Package Should Consist Of:  
• (1) B020-U08-19-K, B020-U08-19KTAA, B020-U16-19-K or B022-U16 KVM Switch  
• (8) P778-006 USB/PS2 Combo KVM Cable Kits*  
• (2) P778-006 USB/PS2 Combo KVM Cable Kits**  
• (1) USB/PS2 Combo Console Cable Kit  
• (1) RJ45 to DB9 Firmware Upgrade Cable  
• (1) C13 to 5-15P Power Cord*  
• (1) AC Power Adapter (Input: 100-240V, 50/60 Hz, 0.5A/Output: 5.3V, 2.4A)**  
• (1) CD with Owner’s Manual  
• (1) Quick Start Guide  
• (1) Grounding Wire  
• (1) Rackmount Hardware Kit  
• (1) Set of Rubber Feet**  
*B020-U08-19-K, B020-U08-19KTAA or B020-U16-19-K only  
**B022-U16 only  
Check to see that the unit arrived undamaged, with all of its contents. Contact your dealer if  
there is a problem.  
1111 W. 35th Street, Chicago, IL 60609 USA  
NOTE: Follow these instructions and operating procedures to ensure correct performance and to  
prevent damage to this unit or to its connected devices.  
Copyright © 2010 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.  
 
201005078 93-2901.indd  
1
5/17/2010 4:35:48 PM  
2. Installation  
2.1 Rackmounting Instructions for Console KVMs  
The NetDirector Console KVM Switch is designed for mounting in a 1U rack system. For  
convenience, a rack mounting kit is included with your KVM for quick installation. The  
various mounting options are explained in the sections that follow:  
Note:  
1. It is recommended that the unit be installed by two people; one to hold it in place and the other to attach it to the  
rack.  
2. The rackmounting kit that comes with the unit does not include screws or cage nuts. Contact your rack dealer for  
this hardware.  
3. Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7 cm at the rear of the unit for the power  
cord and cable kits.  
Standard Rackmounting  
1
Slide out the rear mounting brackets from the console and mount both brackets  
(separate from the console) to the inside rear of a standard 1U rack system using user-  
supplied screws.  
2
Take the console and gently slide it into the two rear-mounted brackets in the rack and  
secure the console in place by inserting user-supplied screws.  
1
2
2-Post Rackmounting  
The NetDirector Console KVM Switch can also be mounted in a 2-post rack installation  
using the optional 2-Post Rackmount Kit (model: B019-000). The mounting hardware  
allows for the console to be opened with the drawer in any position. Heavy-duty 14-gauge  
steel provides stability and prevents the console frame from twisting. See the B019-000  
instructional manual for detailed mounting instructions.  
2.2 Rackmounting for B022-U16  
Insert screws to connect to rack  
Fasten the rackmount brackets to the rack using user-supplied screws to install in a rack.  
3
 
201005078 93-2901.indd  
3
5/17/2010 4:35:48 PM  
2. Installation  
2.3 Single-Station Installation  
1. Ensure that power to all the devices to be  
connected has been turned OFF.  
5
3
2. Connect the included USB/PS2 Combo  
Console Cable Kit to the console connector  
on the back of the unit, and then connect a  
monitor, mouse and keyboard to the  
1
2
appropriate connectors on the cable kit.  
The distance between the external console  
and the KVM switch must not exceed 66 ft  
(20 m). Note: This step is mandatory for  
B022-U16 KVM Switches, but is optional  
for Console KVM Switches.  
4
3. Use a P778-Series USB/PS2 Combo KVM Cable Kit to connect each CPU port to a  
computer/server. The distance between the KVM switch and each connected computer  
must not exceed 33 ft (10 m).  
4. Plug the power cord or power adapter cable into the KVM’s power jack, then plug into a  
UPS, surge or other AC power source. Turn on the power switch for the console KVM.  
(Not required for the B022-U16.)  
5. Turn ON the power to the computers.  
2.4 Multiple Station (Daisy-Chained) Installation  
To control even more computers, up to 31  
B022-016 or B022-U16 KVM Switches can  
be daisy-chained down from the first station.  
Note: As many as 512 computers can be controlled from  
the unit’s integrated console in a complete installation.  
To set up a daisy-chained  
installation:  
1. Ensure that power to all the devices to be  
connected has been turned OFF.  
2. Use a daisy-chain cable (described in the  
Cables section, page 2) to connect the  
Chain Out port of the parent unit to the  
Chain In port of the child unit. The  
distance between any two KVM switches  
in a daisy-chain must not exceed 49 ft (15  
m). The distance between the first KVM  
switch and the last KVM switch in a daisy-  
chain must not exceed 328 ft (100 m),  
regardless of the number of KVM switches  
in the entire chain.  
4
 
201005078 93-2901.indd  
4
5/17/2010 4:35:48 PM  
2. Installation  
2.4 Multiple Station (Daisy-Chained) Installation  
3. Use a KVM cable kit (described in the Cables section, page 2) to connect the keyboard,  
video and mouse ports of a computer to any available port on the KVM switch. The  
distance between the KVM switch and each connected computer must not exceed 33 ft  
(10 m).  
4. Repeat the above steps for any additional KVM switches you wish to add to the chain.  
5. Power up the installation according to the following procedure:  
a. Plug in the power adapter for the first station. Wait a few seconds to allow the unit to  
determine its Station ID.  
b. Plug in the power adapters for each subsequent station in the installation in turn (ie.  
second station, then third station, etc.). Each KVM switch has an LED display on its  
front panel to indicate its Station ID (the Station ID for the first station is 01, the ID  
for the second station is 02, the ID for the third station is 03, etc.).  
In each case, wait for the Station ID to be displayed on the Station ID LED before  
plugging in the next station.  
2.5 Multiple Station (Cascaded) Installation  
The B022-U16 KVM Switch can be cascaded off of a B020-008-17-IP or B020-016-17-IP  
Console KVM Switch to expand the number of connected computers. Before you can start  
a cascaded installation, you must upgrade the B022-U16 firmware to be cascade  
compatible. (See the Firmware Upgrade section on page 18 of the owner’s manual for  
details.) For cascaded installation details, see the owner’s manual of the B020-008-17-IP or  
B020-016-17-IP Console KVM Switch.  
5
 
201005078 93-2901.indd  
5
5/17/2010 4:35:48 PM  
3. Basic Operation  
3.1 Opening the NetDirector Console KVM  
The console is located under the top cover.  
To access the console, slide the console  
module out and raise the cover.  
Note: As a safety precaution, to keep the console from  
accidentally sliding out, the console is locked into the in  
position. Before you can pull the console module out, you  
must release it by pushing the catches on the unit’s front  
panel toward the center of the switch.  
3.2 Closing the NetDirector Console KVM  
To slide the console module back in, close  
the cover and do the following:  
1. Pull the safety catches on the unit’s side  
rails toward you and push the module in  
until it stops.  
2. Release the catches; pull the module  
slightly toward you; then push it all the  
way in.  
Note: The reason for the two-step procedure is to  
minimize the chances of pinching your fingers when  
sliding the module in.  
4. OSD (On-Screen Display) Operation  
4.1 OSD Overview  
The On-Screen Display (OSD) is a text-based interface that allows for control and  
administration of the KVM switch. When logging onto the KVM switch, the OSD Main  
Menu is the first screen you will see after entering your username and password.  
4.2 Logging In For The First Time  
The KVM switch features a two-level security, with one Administrator and four User  
accounts. If you are an Administrator accessing the KVM switch for the first time, leave  
the username and password field blank and hit the [Enter] key twice to access the OSD  
Main Menu. Once logged into the KVM switch as Administrator, you will be able to access  
all OSD features and customize KVM settings. At this point, it is highly recommended that  
you change the Administrator username and password.  
6
 
201005078 93-2901.indd  
6
5/17/2010 4:35:48 PM  
4. OSD (On-Screen Display) Operation continued  
4.3 OSD Invocation Sequence  
Once logged into the KVM switch, you will need to use one of two sequences to open the  
OSD Main Menu; [Scroll Lock, Scroll Lock] or [Ctrl, Ctrl]. The default OSD invocation  
sequence is [Scroll Lock, Scroll Lock]. Note: When using the [Scroll Lock, Scroll Lock]  
OSD invocation sequence, you must hold down the [Fn] key, as the [Scroll Lock] key is part  
of the [Num Lock] key.  
F1:GOTO  
F2:LIST  
F3:SET  
F4:ADM  
F5:SKP  
F6:BRC  
F7:SCAN  
F8:LOUT  
X
zZz  
ADMINISTRATOR  
LIST:ALL  
SN.PN  
QV  
X
NAME  
02 • 14  
02 • 15  
02 • 16  
03 • 01  
03 • 02  
03 • 03  
03 • 04  
03 • 05  
ABC COMP1  
ABC COMP2  
ABC COMP3  
WEB SERVER 1  
WEB SERVER 2  
FAX SERVER 1  
FAX SERVER 2  
MAIL SERVER 1  
X
X
X
X
X
When you invoke the OSD, a screen similar to the one above appears:  
Note:  
1. The diagram depicts the Administrator’s Main Screen. The User Main Screen does not have the F4 and F6  
functions, since they can’t be accessed by ordinary Users and are reserved for the Administrator.  
2. OSD always starts in List view, with the highlight bar at the same position it was when it was last closed.  
3. Only the ports that have been set accessible by the Administrator for the currently logged in User are visible.  
4. If the port list is collapsed into stations, simply click on the plus sign next to the desired station number, or  
highlight the desired station number and hit the [Enter] key.  
4.4 OSD Navigation  
To close the menu and deactivate OSD, click the [X] at the upper right corner of the  
OSD Window; or press [Esc].  
To logout, press [F8], or click F8, on the OSD Menu Bar or click the zZz symbol at the  
upper right hand corner of the OSD Screen.  
• To move up or down one line at a time, click the Up and Down Triangle symbols ()  
or use the Up and Down Arrow Keys. If there are more entries than appear on the screen,  
the screen will scroll.  
• To move up or down one screen at a time, click the Up and Down Arrow symbols (),  
or use the [Pg Up] and [Pg Dn] keys. If there are more entries than appear on the screen,  
the screen will scroll.  
• To activate a port, double-click it, or move the Highlight Bar to it then press [Enter].  
• After executing any action, you automatically go back to the menu one level above.  
7
 
201005078 93-2901.indd  
7
5/17/2010 4:35:48 PM  
5. Warranty  
1-YEAR LIMITED WARRANTY  
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year  
from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at  
its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material  
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be  
returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be  
accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty  
does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or  
modified in any way. EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR  
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid  
limitation(s) or exclusion(s) may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL  
TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss  
of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.  
6. Warranty Registration  
entered into a drawing for a chance to win a FREE Tripp Lite product!*  
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.  
Regulatory Compliance Identification Numbers  
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a  
unique series number. The series number can be found on the product nameplate label, along with all required approval  
markings and information. When requesting compliance information for this product, always refer to the series number.  
The series number should not be confused with the marking name or model number of the product.  
FCC Notice, Class A  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the  
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case  
the user will be required to correct the interference at his own expense. The user must use shielded cables and  
connectors with this equipment. Any changes or modifications to this equipment not expressly approved by Tripp Lite  
could void the user’s authority to operate this equipment.  
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)  
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when  
customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:  
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)  
• Send the new equipment back for recycling when this ultimately becomes waste  
Warning!  
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to  
cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.  
Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.  
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.  
1111 W. 35th Street, Chicago, IL 60609 USA  
201005078 • 932901-EN  
8
 
201005078 93-2901.indd  
8
5/17/2010 4:35:48 PM  

Telex Headphones PH 45 User Manual
Telex Microphone FMR 70 User Manual
Texas Instruments Power Supply SLVU013 User Manual
Timex Watch Performance Watch User Manual
Transition Networks Network Cables SCSCF30XX 10X User Manual
Tricity Bendix Cooktop SIE 252 User Manual
Troy Bilt Lawn Mower T 546 User Manual
Uniden Telephone FP204 User Manual
Vax Flat Panel Television 17RTC User Manual
ViewSonic Car Video System va1918wm User Manual