ICE MAKER
Model BI-95BTP
13-13/16 (35.1)
17 (43.2)
25-1/4
(64.0)
HT/W FLANGE
ICE MAKER
24-3/4
(62.9)
* POWER
CORD
8-1/2
(21.6)
15-1/16 (38.2)
W/FLANGE
14-3/8 (36.5)
FLANGE
* WATER
LINE
INLET
ADD 1-1/2" TO DEPTH FOR
WATER LINE CONNECTION
* ON BACK OF UNIT
INCHES (CENTIMETERS)
FEATURES
1. High ice production
BENEFITS
Produces up to 23 lbs. of ice per day and stores 12 lbs.
2. Requires no drain
Easy and inexpensive to install. Only needs 1/4 inch outside diameter
water line connection.
3. Front vented for built-in installation
No need for extra fans, air space, or special venting to the outside of the
cabin. Do not obstruct front grille.
4. Conserves water
5. Conserves energy
Only 2-3/4 gallons of water required to produce approximately 22 lbs. of ice.
Uses less electricity than a 75-watt light bulb.
6. Field reversible door with zero clearance Fits any location, easy access.
door swing
7. Adjustable temperature control
8. 1/2 inch wide flange
Permits adjustment of daily ice rate.
Surrounds front of cabinet for easy mounting in surrounding cabinets.
Hinges and fasteners are stainless steel to prevent corrosion.
9. Corrosive resistant components
ADDITIONAL FEATURES:
• Will accept flat or raised panel
• Panel size: H 13-15/32" X W 12-15/16"
• Travel pin keeps door securely closed
• See through, removable ice bucket
• Shipping weight: 65 lbs.
8900 N. 55th Street
Milwaukee, Wisconsin 53223
(414) 354-0300
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
FAX (414) 354-7905
All specifications subject to change without notice.
KCC Printed in U.S.A.
P/N SS-BI-95BTP
|