Uniden Telephone DECT 2005 Series User Manual

DECT 2005  
Accessory handset for  
DECT 2015 Series  
DECT 2035 Series  
 
Compatible Bases  
This handset is compatible with Uniden’s 1.8 GHz DECT  
Expandable phone system: the DECT2015 and DECT2035  
series.  
Installing the Accessory Handset  
Checking the Package Contents  
Make sure your package contains the following items. If any  
items are missing or damaged, please contact your place of  
purchase immediately.  
• Cordless Handset  
• Printed Material  
• Charging cradle with AC Adapter (model # AAD-600S(M):  
Input 240V AC, 50Hz; Output 9V DC, 210 mA)  
• Rechargeable Ni-Cd Battery Pack (model # BT-904)  
2
 
Installing the Battery  
Use only the Uniden BT-904 rechargeable battery pack supplied  
with your cordless telephone.  
Line up the red and black  
wires on the battery pack  
connector with the sticker in  
the handset’s battery  
compartment.  
Unpack the  
handset, battery  
pack and battery  
cover.(If the battery  
cover is on the  
handset, press in  
on the notch and  
slide the cover off.)  
RED  
BLACK  
Push the battery pack  
connector in firmly. (You  
should hear it click into  
place.) Gently tug on the  
battery wires to make sure  
the connection is secure.  
Place the cover over the  
battery compartment and  
slide it up into place.  
3
 
Charging the Accessory Handset  
The handset is powered by a rechargeable battery pack that  
automatically recharges when the handset is placed in the  
charging cradle.  
Use only the Uniden AAD-600S(M) AC adapter with the charging  
cradle.  
Connect the AC  
adapter to the DC IN  
9V jack as shown.  
(It may already be  
connected.)  
Connect the AC adapter to a  
standard 240V AC wall outlet.  
Place the handset in the  
charging cradle with the  
display facing forward.  
Make sure that the charge  
LED illuminates when the  
handset is seated.  
What if the charge LED  
doesn’t light up?  
Reseat the handset; make sure  
the contacts on the bottom of  
the handset are lined up with  
the contacts in the cradle.  
Check the AC adapter connection.  
Make sure you are not using an outlet  
that’s controlled by a wall switch.  
Charge your handset at least 15 to 20 hours  
before using your new handset for the first time.  
4
 
Registering the Handset  
You must register the handset to the base before you can use it.  
Only one handset can be registered at a time. (If an accessory  
handset has ever been registered to a base, you must reset the  
handset before you can register it to a new base.)  
To register to a DECT2015 or DECT2035 base:  
Place the accessory handset in the base. While the handset  
is registering, Handset Registering appears in the LCD. When  
Registration complete is displayed, the handset has been  
registered to the base.  
What if the  
1
display shows  
Registration  
failed?  
Charge the handset  
for 15-20 hours.  
Extra Handset  
Pick up the  
handset from  
the base and  
try again.  
Charging cradle  
2
Extra Handset  
Place the extra handset  
in the main base to  
register.  
Main Base  
4
Extra Handset  
+
Main Base  
3
Charging cradle  
5
 
Resetting the Handset  
If you want to register the handset to a different base or replace  
a handset with another one, you must first clear the registration  
information from the base and the handset.  
1) Press and hold END and # for at least five seconds, until the  
SYSTEM RESET menu appears.  
2) Select the Deregister HS  
submenu by pressing MENU/  
SELECT. Which Handset?  
appears in the display.  
3) Use  
or  
to select the  
handset ID to be de-registered from the list, and then press  
MENU/SELECT. Deregister HS appears.  
4) Press  
to move the cursor to Yes, and then press  
MENU/SELECT. You will hear a confirmation tone.  
6
 
Resetting the Handset Without the Base  
If the original base this handset was registered to is not  
available for some reason (for example, it is lost or somehow  
incapacitated), you can still reset the handset and use it with  
another base.  
1) Press and hold END and # for at least five seconds, until the  
SYSTEM RESET menu appears.  
2) Press  
to move the cursor to Base Unavailable and then  
to move the cursor to the base which you want  
press MENU/SELECT.  
3) Press  
to de-register from, and then press MENU/SELECT. Base  
Unavailable appears.  
4) Press  
to move the cursor to Yes, and then press  
MENU/SELECT. You hear a confirmation tone, and the  
handset deletes its own link to the base without trying to  
contact the base.  
Now you are ready to register the handset to the new base.  
7
 
Using the Interface  
Parts of the Handset  
new message LED  
Earpiece  
Display (LCD)  
key (up)  
CLEAR/INT'COM key  
(clear/intercom)  
MENU/SELECT key  
key  
key (phonebook/left)  
(caller ID/right)  
END key  
TALK/FLASH key  
key (down)  
key (speaker)  
Twelve-key dial pad  
/TONE key  
# key  
PREMIUM  
REDIAL/PAUSE key  
/MUTE key  
(messages/mute)  
DECT  
Microphone  
Charging contacts  
8
 
Reading the Display  
In standby  
Time  
Handset ID and banner  
Number of new  
Caller ID calls received  
During a call  
Call duration  
The ringer off icon indicates that the ringer is  
turned off.  
The voice mail icon appears when you have  
messages waiting in your voice mailbox.  
The privacy icon appears when the Privacy  
Mode is turned on.  
The speaker icon appears when the speaker  
phone is in use.  
The mute icon appears while the microphone  
is muted.  
The battery icon indicates the handset  
battery status: full, medium, low, and empty.  
9
 
Using the Four-way Function Key  
Your handset has a four-way function key that allows you to  
move the cursor or pointer on the display and access the most  
commonly used features at the touch of a button.  
• Press the left side of the key to open the phonebook.  
• Press the right side of the key to open the Caller ID list.  
• Press the top of the key to increase the ringer volume (while  
the phone is  
in standby) or  
speaker volume  
(while you are on  
a call).  
Increase the volume  
• Press the bottom  
of the key to  
Open the  
phonebook  
Open the  
Caller ID list  
decrease the  
ringer volume  
(while the phone  
is in standby) or  
speaker volume  
(while you are on  
a call).  
Four-way  
Function Key  
Decrease the volume  
Using the Handset Menus  
To open the menu, press the MENU/SELECT key.  
The arrow cursor on the left side of the line shows which  
menu item is currently highlighted. Use  
function key to move the cursor up and  
down.  
on the four-way  
to move the cursor  
To select the highlighted option, press MENU/SELECT.  
To go back to the previous screen, press left on the four-way  
function key.  
To exit the menu, press END.  
If you don’t press any keys for thirty seconds, the phone will  
time out and exit the menu.  
Entering Text from Your Handset  
You can use the number keypad on your handset to enter text  
by referring to the letters printed on each number key. When you  
press the number key in a text entry field, the phone displays  
the first letter printed on the number key. Press the number key  
twice to display the second letter and three times to display the  
third.  
10  
 
• When [Aa] appears on the display, capital letters are displayed  
first, then lower case letters, and then the number on the key.  
• When [aA] appears on the display, lower case letters are  
displayed first, then the number on the key, and then capital  
letters.  
• When you input the first letter or a letter after a blank space,  
the default mode is [Aa]. From the next letter, the mode  
changes to [aA] automatically.  
You can switch back and forth the mode manually between  
[Aa] and [aA]. Press /TONE; the case (small/capital) of the  
letter entered changes also.  
If two letters in a row use the same number key, enter the first  
letter, then use right on the four-way function key to move the  
cursor to the next position to enter the second letter.  
For example, to enter the word "Movies":  
Number of times key is pressed (when [Aa] appears on the display)  
1) Press 6  
once to  
1
enter M.  
2 ABC  
2) Use right  
3 DEF  
on the  
4 GHI  
four-way  
5 JKL  
function  
6 MNO  
key to  
7 PQRS  
8 TUV  
move the  
cursor to  
the right.  
9 WXYZ  
0 OPER  
3) Press 6  
three times  
to enter o.  
4) Press 8 three times to enter v.  
5) Press 4 three times to enter i.  
6) Press 3 two times to enter e.  
7) Press 7 four times to enter s.  
8) Press MENU/SELECT to end your text entry.  
If you make a mistake while entering a name, use right or left  
on the four-way function key to move the cursor to the incorrect  
character. Press CLEAR/INT’COM to erase the wrong character,  
and then enter the correct character. To delete all characters,  
press and hold CLEAR/INT’COM.  
11  
 
Using Your Accessory Handset  
Making and Receiving Calls  
With the earpiece  
With the speaker phone  
1) Pick up the handset from the 1) Pick up the handset  
cradle.  
2) Dial the number.  
3) Press TALK/FLASH.  
from the cradle.  
2) Dial the number.  
Make a  
call  
3) Press  
.
1) Pick up the handset.  
(If AutoTalk is on, the phone  
answers when you pick up the  
handset from the cradle.)  
1) Pick up the handset.  
2) Press  
Answer a  
call  
2) Press TALK/FLASH.  
(If Any Key Answer is on, you  
can press any key on the dial  
pad.)  
.
Hang up Press END or return the handset to the cradle.  
Adjusting the Volume  
Choose from four ringer volume settings (off, low, medium,  
and high). With the phone in standby, press or . The  
display shows the current volume level and the handset  
sounds the ringer at that level. Use to make the ringer  
volume louder or to make it softer or turn it completely off.  
Ringer  
Volume  
Choose from six volume levels for the earpiece. While on a  
Earpiece  
Volume  
call, press  
to make the earpiece volume louder or  
to  
make it softer.  
Choose from six volume levels for the handset speakerphone.  
Speaker  
Volume  
While on a speakerphone call, press  
volume louder or to make it softer.  
to make the speaker  
Notes: If you set the ringer volume to Off, the handset won’t ring. The  
other stations will ring according to their individual settings.  
The handset earpiece and the handset speaker have separate  
volume settings.  
12  
 
Using Caller ID and Call Waiting  
If you subscribe to Caller ID, you can store up to thirty Caller  
ID numbers in each handset. Caller ID records are stored from  
newest to oldest. Once your Caller ID list is full and you receive  
an incoming call, the oldest record will be automatically deleted  
to make room for the new record.  
To open the Caller ID list, press . The phone will show the  
latest records. From the screen, you have the following options:  
Press  
to scroll through CID records. CID  
Scroll through the  
records  
records are stored chronologically from newest  
to oldest. (New records have an asterisk next  
to the received time.)  
1) Find the record you want to store and press  
MENU/SELECT.  
Store a record in the  
phonebook  
2) Move the cursor to Store into PB, and press  
MENU/SELECT.  
Find the entry you want to dial and press  
Dial a record  
TALK/FLASH or  
.
1) Find the entry you want to delete and press  
MENU/SELECT.  
Delete a record  
2) Move the cursor to Delete Entry, and press  
MENU/SELECT.  
1) Press MENU/SELECT.  
Delete all records  
2) Move the cursor to Delete All, and press  
MENU/SELECT.  
Press END, or press  
(the left key on the  
Exit the Caller ID list  
four-way function key) if you are on a call.  
Using Call Waiting  
If you subscribe to call waiting, a tone sounds if a call comes in when you  
are on the phone. If you subscribe to Caller ID on call waiting, the Caller  
ID information of the waiting call appears on the display.  
For Australian model: Press TALK/FLASH and then [2] on the handset  
to accept the waiting call. After a short pause, you will hear the new  
caller.  
To return to the original caller, press TALK/FLASH and then [2] on the  
handset again.  
For New Zealand Model:  
Press TALK/FLASH on the handset to accept the waiting call. After a  
short pause, you will hear the new caller. To return to the original caller,  
press TALK/FLASH on the handset again.  
13  
 
Using the Phonebook  
Your handset can store up to seventy names and numbers in  
your phonebook. When all the phonebook entries are full, you  
will hear a beep and Memory Full appears. You cannot store any  
additional names and numbers unless you delete some of the  
existing ones.  
Press  
to enter the phonebook. Once in the phonebook, you  
have the following options:  
Press  
alphabetically.  
to scroll through the phonebook  
Scroll through  
the entries  
Jump to  
entries that  
start with a  
certain letter  
Press the number key corresponding to the letter you  
want to jump to.  
1) Press MENU/SELECT.  
Store a new  
entry  
2) Move the cursor to Create New, and then press  
MENU/SELECT.  
1) Find the entry you want to copy, and press  
MENU/SELECT.  
Copy one  
entry to  
another  
station  
2) Move the cursor to Copy, and press  
MENU/SELECT  
.
3) Move the cursor to select the station you want to  
copy the entry to, and press MENU/SELECT.  
Copy all  
entries to  
another  
station at  
once  
1) Press MENU/SELECT, and then select Copy All.  
2) Move the cursor to select the station you want to  
copy the entries to, and press MENU/SELECT.  
3) Move the cursor to Yes, and press MENU/SELECT.  
1) Find the entry you want to dial.  
Dial an entry  
2) Press TALK/FLASH or  
.
1) Find the entry you want to delete, and press  
Delete an  
entry  
MENU/SELECT.  
2) Move the cursor to Delete, and press MENU/SELECT  
.
1) Press MENU/SELECT.  
Delete all  
entries  
2) Move the cursor to Delete All, and press  
MENU/SELECT.  
Close the  
phonebook  
Press END, or press  
again if you are on a call.  
14  
 
Redialing a Number  
To redial one of the last five numbers dialed on this handset,  
press REDIAL/PAUSE. This opens the redial list. Use  
to find the number you want to dial, and press TALK/FLASH or  
in standby, or press MENU/SELECT during a call.  
and  
Muting the Ringer (One Call Only)  
While the handset is ringing, press  
/MUTE or END to mute  
the ringer for this call. The phone will ring again on the next call.  
(The handset must be off the cradle to mute the ringer.)  
Muting the Microphone  
To mute the microphone so the caller can't hear you, press  
/MUTE during a call. Mute On and appear in the display.  
Press  
/MUTE again to cancel muting.  
Privacy Mode  
To prevent other stations from interrupting a call, press  
MENU/SELECT during a call. Move the cursor to Call Privacy,  
and then press MENU/SELECT. Privacy Mode On and appear  
in the display. Repeat the procedure to turn off privacy mode.  
Adjusting the Audio Tone  
If you aren't satisfied with your phone's audio quality, you can  
adjust the Audio Tone of the earpiece. While on a call, press  
MENU/SELECT. Move the cursor to select Audio Tone, and  
then press MENU/SELECT. Move the cursor to select desired  
audio tone options: High Tone, Natural Tone, or Low Tone. (The  
default setting, Natural Tone, is recommended for hearing aid  
users.) Press MENU/SELECT to confirm. After two seconds, the  
displayed audio tone is set, and the display returns to normal.  
Audio tone adjustments only apply to the earpiece, not the  
speakerphone.  
15  
 
Using Hold, Conference, Transfer and Intercom  
Press CLEAR/INT’COM. If you leave a caller on  
hold for more than five minutes, the call will be  
Put a call on hold  
disconnected. To return to the party on hold, press  
TALK/FLASH or  
.
To join a call already in progress, press  
Join a call already  
in progress  
TALK/FLASH or  
. You can hang up normally;  
the other station remains connected to the call.  
Press CLEAR/INT’COM; the call is placed on  
hold. Use  
or  
to select the station you want  
to transfer the call to, and press MENU/SELECT.  
(To page all stations at once, select All.) When the  
other station answers, you can talk to the station;  
the outside call remains on hold. If the other  
Transfer a call  
station accepts the call, you will be disconnected.  
To cancel the transfer and return to the call,  
Cancel a transfer  
press TALK/FLASH or  
.
To answer the transfer page and speak to the  
transferring station, press TALK/FLASH or  
CLEAR/INT’COM. To accept the call and speak to  
the caller, press TALK/FLASH again.  
Accept a  
transferred call  
With the phone in standby, press  
CLEAR/INT’COM.Use  
or  
to select the  
Make an intercom  
page  
station you want to talk with, and then press  
MENU/SELECT. (If you select All, all other  
stations will be paged.)  
Cancel a page  
To cancel the intercom page, press END.  
Answer an  
intercom page  
Press TALK/FLASH or CLEAR/INT’COM.  
Note: When answering a transferred call or an intercom page, if  
AutoTalk is on, the handset will automatically answer the page  
when you pick up the handset from the cradle. If Any Key  
Answer is on, you can also press any key on the handset’s dial  
pad.  
16  
 
Accessing Your Answering System  
If your base has an answering system, you can use your handset  
to get your messages and change your answering system setup.  
The answering system plays your new messages (that you  
have not listened to yet) first. If you have no new messages, the  
system plays your old messages.  
You have the following options:  
Press  
/MUTE. The system announces the number of  
new and old messages, then plays the first new message  
followed by the day and time it was received. Then the  
system plays the new messages in the order they were  
received.  
Playing new  
messages  
Press 1 once to go to the beginning of the current  
Repeating  
a message  
message.  
Press 1 repeatedly to go back to a previous message.  
Skipping a  
message  
Press 3 to go to the beginning of the next message.  
Deleting a While a message is playing, press 4.  
message  
The message is permanently deleted.  
After you listen to your new messages, press  
again to play your old messages.  
/MUTE  
Playing old  
messages  
Press 5 to stop the message playback.  
Press END to exit the system and return to standby,  
or press 2 to restart the message playback.  
Exiting the  
message  
review  
Screening Calls  
If your base has an answering system, you can listen to callers  
as they leave a message. Press  
/MUTE when the system is  
answering to listen to the caller without answering the phone.  
17  
 
Accessing Voicemail  
If your base doesn't have an answering system and you  
subscribe to a voice mail service, you can program your handset  
to automatically dial the access number.  
1) Press MENU/SELECT.  
2) Move the cursor to Handset Setup and press  
MENU/SELECT.  
3) Move the cursor to Edit Voice Mail and press  
MENU/SELECT.  
4) Enter your access number (up to twenty digits). If you need  
the phone to wait before sending the next digits, press  
REDIAL/PAUSE to insert a two-second pause. For a longer  
pause, press REDIAL/PAUSE multiple times. Each pause  
counts as one digit.  
5) Press MENU/SELECT when you are finished.  
Once you program your access number, press  
your voice mail service.  
/MUTE to dial  
Maintenance  
Battery Life  
With average use, your battery provides more than ten hours  
of talk time and approximately seven days of standby time.  
For optimum performance, be sure to return the handset to the  
cradle after each call. If the handset is left off of the cradle, the  
actual talk time duration will be reduced respective to the amount  
of time the handset is off the cradle.  
Note: Do not place the power cord where it creates a trip hazard or  
where it could become chafed and create a fire or electrical  
hazard.  
Low Battery Alert  
When the battery pack is very low, the display shows Low  
Battery - Charge Handset and the empty battery icon. If the  
phone is in standby, none of the keys will operate. If you are on  
a call, complete your conversation as quickly as possible, and  
return the handset to the cradle.  
18  
 
Battery Replacement and Handling  
With normal usage, your battery should last about one year.  
If the talk time becomes short even after the battery is recharged,  
please replace the battery. You can purchase a replacement  
battery by contacting Uniden. See inside the back cover page for  
contact information.  
Warning:  
To avoid the risk of personal injury or property damage from fire or  
electrical shock, use only the BT-904 battery pack.  
Caution:  
- This equipment contains a rechargeable Nickel-Cadmium battery.  
- Do not remove the batteries to charge them.  
- Never throw the battery in a fire or disassemble or heat it.  
- Do not remove or damage the battery casing.  
- Do not short-circuit the battery.  
- Do not charge the battery used in this equipment in any charger  
other than the one designed to charge this battery as specified in  
the owner's manual. Using another charger may damage the  
battery or cause the battery to explode.  
- Rechargeable batteries must be recycled or disposed of properly.  
Clean the Battery Contacts  
To maintain a good charge, clean  
the charging contacts on the  
handset once a month. Dampen  
a cloth with plain water. Gently  
rub the damp cloth over the  
charging contacts until all visible  
Contacts  
dirt is removed.  
Dry the contacts thoroughly  
before returning the handset to the cradle.  
Caution:  
Do not use any chemical products (alcohol, paint thinner, etc.), or  
you may discolor the surface and damage the finish.  
19  
 
Memo  
20  
 
Memo  
21  
 
One Year Limited Warranty  
UNIDEN DECT 2005  
IMPORTANT Evidence of the original purchase is required for warranty service.  
Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498  
Uniden New Zealand Limited  
Elements of Warranty: Uniden warrants to the original retail owner for the duration  
of this warranty its DECT 2005 (hereinafter referred to as the Product), to be free  
from defects in materials and craftsmanship with only the limitations or exclusions  
set out below.  
Warranty Duration: This warranty to the original retail owner only is only valid in  
the original country of purchase and shall be of no further effect 1 year after the  
date of original retail sale. This warranty will be deemed invalid if the Product is: (A)  
Damaged or not maintained as reasonable and necessary, (B) Modified, altered  
or used as part of any conversion kits, subassemblies, or any configurations not  
sold by Uniden, (C) Improperly installed, (D) Repaired by someone other than  
an authorized Uniden Repair Agent for a defect or malfunction covered by this  
warranty, (E) Used in conjunction with any equipment or parts or as a part of a  
system not manufactured by Uniden. (F) Only available in the original country of  
sale.  
Parts Covered: This warranty covers for one (1) year, the Product and included  
accessories.  
Statement of Remedy: In the event that the Product does not conform to this  
warranty at any time while this warranty is in effect, the warrantor, at its discretion,  
will repair the defect or replace the Product and return it to you without charge for  
parts and service. This warranty does not provide for reimbursement or payment  
of incidental or consequential damages. This EXPRESS WARRANTY is in addition  
to and does not in any way affect your rights under the TRADE PRACTICES ACT  
1974 (Cth) (Australia) or the CONSUMER GUARANTEES ACT (New Zealand).  
Procedure for obtaining performance or warranty: in the event that the Product  
does not conform to this warranty, the Product should be shipped or delivered,  
freight prepaid, with evidence of original purchase (e.g. a copy of the sales docket)  
to the warrantor at:  
UNIDEN AUSTRALIA PTY LTD  
Service Division  
UNIDEN NEW ZEALAND LTD  
Service Division  
345 Princes Highway,  
Rockdale, NSW 2216  
Fax (02) 9599 3278  
150 Harris Road, East Tamaki,  
Auckland  
Fax (09) 274 4253  
22  
 
© 2008 Uniden Australia Pty Limited/Uniden New Zealand Limited  
Printed in China UUZZ01663BZ(0)  
 

Toshiba Projection Television TLP B2U User Manual
Triarch Indoor Furnishings 33196 User Manual
Tricity Bendix Clothes Dryer TM 560 User Manual
Tricity Bendix Freezer TBFF 55 User Manual
Uniden Conference Phone FP203 User Manual
Uniden Two Way Radio uh043sx 2 User Manual
United States Stove Fan EC95 User Manual
ViewSonic Laser Pointer WPG 370 User Manual
Vivotek Security Camera IP7251 User Manual
Vosonic Digital Camera GV6200 User Manual