User’s Manual
TM
SKYSLICER THE ALLOSAURUS
© 2013 VTech
Printed in China
US
91-009632-000
INTRODUCTION
My name is SkySlicer the Allosaurus, but you can call me “Big Al.”
I’m on a hunting expedition—want to come along? With my strong
arms, sharp claws and teeth that cut and saw, other dinos don’t
stand a chance. I love the thrill of the hunt...let’s go!
On/Off Switch
Volume Button
Style Button
LCD Screen
Sound Button
Talk Button
2
INCLUDED IN THIS PACKAGE
•
One VTech® SWITCH&GODINOS®:SkySlicer the AllosaurusTM
•
One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a screwdriver
to loosen the screw.
3. Install 2 new AAA (LR03/AM-4)
batteries into the main unit following
the diagram inside the battery box.
(The use of new, alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.
3
BATTERY NOTICE
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
•
•
•
•
•
•
•
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
4
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn
the unit ON.
2. STYLE BUTTON
Press the Style Button to choose a pilot
or change the dino eyes.
3. TALK BUTTON
Press the Talk Button to hear the dino
or pilot talk.
4. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
5. VOLUME BUTTON
Press the Volume Button to adjust the
volume.
There are 4 levels available: low, medium,
high and mute.
5
6. TURNING UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF Switch to OFF to turn the unit OFF. To preserve
battery life, the unit will automatically power-off after several minutes
without input.
HOW TO SWITCH THE JET TO A DINO
1. Jet shape.
2. Move the head down.
3. Turn the back legs forward.
4. Flip the arms forward.
Then pull the front halves
of the arms down.
6
6. Move the wings up to form
the tail.
5. Turn the outer half of the
wings 180 degrees.
7. Fold the nose under the
chin and open the mouth.
8. Dino shape.
Note: To change the dino back into a jet, reverse the order of the
steps above.
7
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
8
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
9
|