Valcom Security Camera V 2960A User Manual

Issue 0  
V-2960A  
NTSC Color Video Camera  
Introduction  
The V-2960A is a NTSC Format, Color Video  
Camera designed for use with the Valcom Class  
Connection Baseband Video System. The  
V-2960A is wall mountable or may be mounted  
on a single gang electrical box.  
FCC Information  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference when the  
equipment is operated in a commercial  
Environment:  
environment. This equipment generates, uses  
and can radiate radio frequency energy and if not  
installed and used in accordance with the  
instruction manual, may cause harmful  
interference to radio communications. Operation  
of this equipment in a residential area may cause  
harmful interference requiring the user to incur  
expense to correct the interference.  
Temperature:  
Humidity:  
0 to + 40°C  
0 to 80% non-precipitating  
For indoor use only.  
Installation  
All necessary connections are made via the  
RJ-45 connector on the camera. Cable pin outs  
from the top of the plug:  
Specifications  
Features  
W/O  
O/W  
W/G  
BL/W +24VDC  
W/BL +24VDC  
G/W  
W/B  
B/W  
N/C  
N/C  
Ground  
Manually adjustable focus, pan and tilt  
Output matched for use with twisted pair  
cable  
Centrally powered from headend equipment;  
No remote power supply required  
Ground  
Video +  
Video  
Connections made via an RJ-45 jack  
Dimensions/Weight  
Camera mounted in bell box with faceplate:  
4.63" H x 2.80" W x 2.00" D  
(11.76cm H x 7.11cm W x 5.08cm D)  
1 lb. (.45 kg.)  
Mounting  
Install the V-2960A per figure 1. Bend the  
mounting bracket to adjust pan and tilt as  
required. Insert a small screwdriver into the slots  
on the lens assembly of the camera and turn the  
lens to adjust the focus if necessary. The  
V-2960A enclosure features top and bottom  
knockouts to accommodate cable routing.  
Nominal Specifications  
Power requirements:  
Output Impedance:  
Video format:  
24VDC, 40mA  
100 Ohms  
NTSC  
Focal length:  
4.6mm  
Max Aperture:  
f2.8  
1
947983  
 

Toshiba Projector TLP MT3E User Manual
Toshiba Rice Cooker RC 10NMF User Manual
Troy Bilt Trimmer TB245CS User Manual
U Line Refrigerator 2275DWRCOL User Manual
Universal Power Group Car Stereo System 04 0686B User Manual
Vantec Range NST 530U2 User Manual
Viking Refrigerator DDSB483 User Manual
Viking Telescope PC 7 User Manual
Vulcan Hart Charcoal Grill VCB25M ML 44963Z User Manual
Vulcan Hart Charcoal Grill VCRB25 User Manual