Venturer Car Video System PVS7980 User Manual

DUAL SCREEN MOBILE DVD  
PVS7980  
NEED MORE HELP?  
DO NOT RETURN THIS  
PRODUCT TO THE STORE  
OWNER’S MANUAL  
Please visit online help at  
SAFETy PRECAUTIONS  
The lightning flash with arrowhead  
symbol, within an equilateral triangle, is  
intended to alert the user to the presence  
of uninsulated “dangerous voltage” within the  
products enclosure that may be of sufficient  
magnitude to constitute a risk of electric shock  
to persons.  
The exclamation point within an  
equilateral triangle is intended to alert  
WARNING: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER(ORBACK).NOUSER-SERVICEABLE  
PARTS INSIDE. REFER SERVICINGTO QUALIFIED  
the user to the presence of important  
operating and maintenance (servicing) instructions  
in the literature accompanying the appliance.  
SERVICE PERSONNEL.  
TO PREVENT FIRE OR SHOCK HAZARD,  
DO NOT EXPOSE THIS UNIT TO RAIN OR  
MOISTURE. DO NOT PLACE OBJECTS FILLED  
WITH LIQUIDS ON OR NEAR THIS UNIT.  
CAUTION  
INVISIBLE LASER RADIATION WHEN  
OPEN.  
AVOID EXPOSURE TO BEAM.  
CAUTION:  
• Use of Controls, aDjUstments or  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED MAy RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
• DanGer of eXPlosIon If BatterY Is  
INCORRECTLy REPLACED. REPLACE ONLy  
WITH THE SAME OR EQUIVALENT TyPE.  
This product contains a  
low power laser device.  
CLASS 1 LASER PRODUCT  
PLACEMENT INFORMATION  
• Do not use this unit in places that are extremely hot, cold, dusty, or humid.  
• Do not restrict the airflow of this unit by placing it somewhere with poor airflow, by covering  
it with a cloth, or by placing it on bedding or carpeting.  
SAFETy INFORMATION  
• When connecting or disconnecting the Car power adapter, grip the power and not the cord  
itself. Pulling the cord may damage it and create a hazard.  
E - 1  
 
811-798191W012.indd  
1
4/1/2008 5:00:56 PM  
TABLE OF CONTENTS  
SAFETy PRECAUTIONS .............. 1 - 2  
IMPORTANT SAFETy INSTRUCTIONS .  
.......................................................... 2  
TABLE OF CONTENTS ...................... 3  
DISC FORMATS ................................ 4  
MAINTENANCE ............................... 5  
ACCESSORIES .................................. 5  
GETTING STARTED .......................... 5  
REMOTECONTROLREFERENCEGUIDE  
.......................................................... 6  
UNIT AND MONITOR REFERENCE  
GUIDE .............................................. 7  
CD/DVD OPERATION ................... 14  
Playing a Disc ............................ 14  
Playing a Picture File Disc .......... 14  
Angle Selection (DVD) ............... 14  
SPECIAL FUNCTIONS .................... 15  
Display Function (DVD) ............. 15  
Locating a Specific Title (DVD) ... 15  
locating a specific Chapter/track ......  
................................................... 15  
Locating a Specific Time ............. 15  
REPEAT PLAyBACK ......................... 16  
repeating a Chapter/title (DVD) ........  
................................................... 16  
repeating a single track/an entire  
Disc (CD) ................................... 16  
repeating a specific section (DVD/  
CD) ............................................ 16  
DVD PROGRAMMABLE PLAyBACK ......  
........................................................ 17  
Programmable Memory .............. 17  
title/Chapter Programmed Playback  
(DVD) ..................................... 17  
CUSTOMIZING THE DVD FUNCTION  
SETTINGS ................................. 17-18  
Language Setup .......................... 17  
Video Setup ............................... 18  
System Setup .............................. 18  
POWER SUPPLy ............................... 8  
CONNECTIONS ........................ 9 - 11  
Watching a DVD on the Main Unit  
and the Monitor ........................... 9  
Watching a TV on Main Unit ........ 9  
Listening to a Stereo Receiver or an  
Amplifier on the Main Unit ........ 10  
Playing Game system/Video  
Equipment on the Monitor ......... 10  
Using the Monitor with Other  
Equipment while Playing DVDs on the  
Main Unit ................................ 11  
Using Headphones/earphones .... 11  
PLACEMENT .............................. 12-13  
Mounting in the Vehicle ............. 12  
Using the Stand .......................... 13  
TROUBLE SHOOTING GUIDE ...... 19  
LIMITED WARRANTy ............... BACK  
SOUND SySTEM ............................ 13  
E - 3  
 
811-798191W012.indd  
3
4/1/2008 5:00:57 PM  
DISC FORMATS  
This unit can playback:  
DVDS  
AUDIO CDS  
[8Cm/12Cm DIsC]  
CD-R/CD-RW  
[8Cm/12Cm DIsC]  
Compatible  
REGION MANAGEMENT INFORMATION  
Region Management Information: This unit is designed and manufactured to respond to the Region  
Management Information that is encoded on DVDs. If the region number printed on the DVD does not  
correspond to the region number of this unit, this unit cannot play that disc.  
The region number of this unit is  
.
DISC FUNCTION OR OPERATION THAT IS NOT AVAILABLE  
When the  
symbol appears on the screen, it indicates that the function or operation attempted is not  
available at that time. This occurs because the DVD manufacturer determines the specific functions.  
Certain functions may not be available on some discs. Be sure to read the documentation provided  
with the DVD.  
ICONS USED ON DVDS  
Sample lcons  
Language selections for audio  
Language selections for subtitles  
Screen aspect ratio  
Note:  
• WhenplayingbackaCD-G(Graphics)  
or CD EXTRA disc, the audio portion  
will be played, but the graphic images  
will not be shown.  
Multiple camera angles  
Region code indicator  
TITLES, CHAPTERS AND TRACKS  
• DVDs are divided into “titles” and “chapters”. If  
the DVD has more than one movie on it, each  
movie would be a separate “title”. “Chapters”  
are sections of “titles”.  
audio CDs are divided into “tracks”. a “track”  
is usually one song on an Audio CD.  
Note:  
numbersidentifyeachtitle,chapter,andtrackon  
a disc. Most discs have these numbers recorded  
on them, but some do not.  
Notes on Unauthorized Discs:  
youmaynotbeabletoplaysomeDVDsonthisunitiftheywerepurchasedfromoutsideyourgeographical  
area or made for business purposes.  
NOTES ON COPyRIGHT  
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted  
material without permission.  
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936  
licensed for limited viewing uses only.  
This product incorporates copyright protection technology that is protected by U.S. patents and  
other intellectual property rights. Use of this copyright protection technology must be authorized by  
Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized  
by Macrovision. Reverse engineering or disassembly is prohibited.  
E - 4  
 
811-798191W012.indd  
4
4/1/2008 5:00:57 PM  
MAINTENANCE  
heart shaped, octagonal, etc.). They may cause  
malfunctions.  
CLEANING THE UNIT  
Be sure to turn the unit off and disconnect the aC  
power cord before maintaining the unit.  
Wipe the unit with a dry soft cloth. If the surfaces  
are extremely dirty, wipe clean with a cloth that  
has been dipped in a weak soap-and-water  
solution and wrung out thoroughly. Then wipe  
with a dry cloth.  
never use alcohol, benzene, thinner, cleaning  
fluid or other chemicals. Do not use compressed  
air to remove dust.  
IMPORTANT NOTE  
Before transporting the unit, remove the disc from  
the disc compartment.  
CLEANING THE DISC  
A defective or soiled disc inserted into the unit  
can cause sound to drop out during playback.  
Handle the disc by holding its inner and outer  
edges.  
• Do not touch the surface of the unlabeled  
side of the disc.  
• Do not stick paper or tape on the surface.  
• Do not expose the disc to direct sunlight or  
excessive heat.  
Clean the disc before  
playback. Wipe the disc  
from the center outward  
with a cleaning cloth.  
neVer use solvents such as benzine or  
alcohol to clean the disc.  
Do not use irregular shaped discs (example:  
ACCESSORIES  
PLEASE LOCATE THE INCLUDED ACCESSORIES.  
Remote Control (with battery) ......... x 1  
Car Power Adapter .......................... x 1  
DC-AV Cable .................................... x 1  
Straps ................................................ x 2  
GETTING STARTED  
USING THE REMOTE CONTROL  
• Point the remote control at the remote  
SENSOR located on the unit.  
• Whenusingthisunitinbrightlight,theinfrared  
REMOTE CONTROL SENSOR may not work  
properly.  
the recommended effective distance for using  
the remote control is about 16 feet.  
Remove the PVC sheet  
before operating the  
Remote Control.  
BATTERy REPLACEMENT  
When the battery becomes weak, the operating  
distance of the remote control will be greatly reduced  
and you will need to replace the battery.  
Note:  
TO CHANGE REMOTE BATTERy  
1. Open the battery  
door.  
• If the remote control is not going to be used for  
a long time, remove the battery to avoid damage  
caused by battery leakage corrosion.  
• When discarding battery, environmental  
problems must be considered and local rules  
of laws governing the disposal of this battery  
must be followed strictly.  
2. Insert one  
CR2025 (3V)  
size battery.  
WARNING:  
• Do not dispose of batteries in a fire. they may  
leak and/or explode.  
the battery should not be exposed to excessive  
heat such as sunshine, fire or the like.  
CAUTION:  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same or  
equivalent type.  
E - 5  
 
811-798191W012.indd  
5
4/1/2008 5:00:57 PM  
REMOTE CONTROL REFERENCE GUIDE  
1) VIDEO MODE Button  
9) SUBTITLE Button  
Press to adjust Brightness, Panel Display  
or Contrast.  
Press to select one of the subtitle languages  
programmed on a DVD (if available).  
RETURN Button  
2)  
3)  
PREV Button  
Press to move back through titles,  
chapters or tracks on a disc.  
Press to return to normal operation after  
using the SETUP menu of a DVD.  
10) AUDIO Button  
Press to select audio soundtracks of a  
DVD or change output mode of a CD.  
11) ANGLE Button  
/
SEARCH Buttons  
SEARCH: Fast reverse playback.  
SEARCH: Fast forward playback.  
4) GOTO Button  
Press to skip directly to a location on a  
DVD.  
Press to switch the camera angle of the  
video presentation when scenes with  
multiple camera angles are recorded on  
a DVD.  
5) Cursor ( ,  
,
,
) Buttons  
Press to highlights selections on a menu  
screen and adjust certain settings.  
ENTER Button  
12) DISPLAy Button  
Press to show status information on the  
screen.  
Press to confirm selections on a menu  
screen.  
13) STOP Button  
6) MEMORy Button  
Press to stop playing a disc.  
PLAy Button  
In DVD play mode, enter the number of  
a selected titles or chapters.  
7) Number (0 - 9) Buttons  
Press to creat programs and locate a title/  
chapter/track or specific time.  
8) REPEAT A-B Button  
Press to start or resume playback of a  
disc.  
PAUSE Button  
Press to pause playback and frame  
advance.  
Press to perform point-to-point repeat  
playback on a DVD or CD.  
REPEAT DISC button  
14)  
NEXT Button  
Press to move forward through titles,  
chapters or tracks on a disc.  
Press to repeat a DVD chapter or title.  
Press to repeat a CD track or the entire  
disc.  
15) MENU Button  
Press to enter and exit the main DVD  
menu.  
SETUP Button  
In STOP mode, press to enter the unit’s  
SETUP menu.  
E - 6  
 
811-798191W012.indd  
6
4/1/2008 5:00:57 PM  
UNIT AND MONITOR REFERENCE GUIDE  
UNIT  
MONITOR  
1)  
Button  
1) VOLUME Control  
Adjusts the volume.  
Pressthebuttonandholdthefrontpanel  
to open the disc door.  
SEARCH Button  
2) Headphone Jack  
2)  
3) AUDIO / VIDEO IN Jacks  
4) DC OUT 9V-12V Jack  
5) LCD Screen  
Press to perform fast reverse playback.  
SEARCH Button  
Press to perform fast forward  
playback.  
6) POWER ON Indicator  
When the ON / OFF switch is in  
the ON position, the green light will  
illuminate.  
PREV Button  
Presstoselectpreviouschaptersortracks  
on a disc.  
7) COLOR Control  
NEXT Button  
Adjusts the color intensity.  
8) BRIGHTNESS Control  
Adjuststherelativelightnessordarkness  
of the screen.  
Presstoselectnexttitle, chapterortrack  
on a disc.  
STOP Button  
Press to stop playing a disc.  
PAUSE Button  
9) Screen Switch  
WIDE: Wide Screen  
Press to pause playback and frame  
advance.  
NORMAL: Pan Screen  
10)ON / OFF Switch  
11)DC IN 9V-12V Jack  
12)Stand  
PLAy Button  
Press to start or resume playback of a disc.  
3) STANDBy (power off) / ON Switch  
4) LCD Screen  
5) Headphone Jack  
6) VOLUME Control  
Adjusts the volume.  
7) AUDIO / VIDEO OUT Jacks  
8) DC IN 9V-12V Jack  
9) Remote Sensor  
Receives the remote control signal.  
POWER ON Indicator  
When the STANDBy / ON switch is in  
the ON position, the green light will  
illuminate.  
10)Stand  
E - 7  
 
811-798191W012.indd  
7
4/1/2008 5:00:57 PM  
POWER SUPPLy  
Using the Car Power Adapter  
The included 12V car power adapter is designed for use with vehicles that have a 12V, negative  
ground electrical system.  
Using the Main Unit and the Monitor Together  
Using the Main Unit or the Monitor  
IMPORTANT  
This car adapter is for use with 12 volt  
batteries only.  
CAUTION  
Fo r c o n t i n u e d  
protection against  
risk of fire, replace  
only with same type  
and rating of fuse.  
WARNING:  
Disconnect this car power adapter when  
not in use. Not for use in 24V vehicles.  
Cautions:  
• Use this unit only with the included 12V car power adapter. Use with other car adapters could damage  
the unit, or even your vehicle.  
the included 12V car power adapter is for use with this unit only. Do not use it with any other  
equipment.  
In the interest of traffic safety, drivers should not operate the unit or view videos while driving.  
When the inside of the 12V car socket is dirty with ashes or dust, the power section may become hot  
due to poor contact. Be sure to clean the 12V car socket before use.  
after use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.  
If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident and  
cause damage, injury, or death.  
Check your local traffic laws for rules governing the use of video devices in vehicles.  
E - 8  
 
811-798191W012.indd  
8
4/1/2008 5:00:58 PM  
CONNECTIONS  
A. Watching a DVD on the Main Unit and the Monitor  
you can watch the same DVD on the main unit and the monitor.  
1. Connect the main unit and the monitor using the included DC-AV Cable.  
2. Turn on the main unit and the monitor.  
3. Play a DVD on the main unit; the monitor will play at the same time.  
B. Watching a TV on Main Unit  
If your tV has audio/Video inputs, you can connect the main unit to your tV using a standard  
a/ V cable (not included).  
Watching a DVD on your TV  
1. Connect your TV to the main unit using a standard AV Cable (not included).  
2. Turn on the main unit.  
3. Turn on the TV and follow the instructions included with it to play the DVD.  
Note:  
make sure to use the correct audio/Video cable. Connecting the plugs incorrectly may cause  
a weak signal.  
• If yourtV does not have audio/Video inputs, you will need to purchase an rf modulator (sold  
separately) and follow the instructions included with it to connect the unit to your TV.  
E - 9  
 
811-798191W012.indd  
9
4/1/2008 5:00:58 PM  
CONNECTIONS  
C. Listening to a Stereo Receiver or Amplifier on the Main Unit  
The main unit can play two channels Dolby Digital.  
Listening on External Audio Equipment  
1. Connect the main unit to the left/right audio In jacks on the other equipment using a standard  
Audio cable (not included).  
2. Turn on the main unit.  
3. Turn on your audio equipment and follow the instructions provided with it to select theAUDIO  
IN function.  
Note:  
make sure to use the correct  
Audio cable. Connecting the plugs  
incorrectly may cause a weak  
signal.  
If you have a stereoVCr, make sure  
you set it to stereo mode.  
Due to copyright protection, DVD  
moviescannotbecopied.Ifyoucopy  
a DVD movie onto a videotape, the  
resulting copy will be unclear, with  
poor sound quality. This is NOT  
caused by a defective DVD system.  
D. Playing a Game System/Video Equipment on the Monitor  
you can connect game systems or other video equipment for playback through the monitor only.  
you cannot connect these systems to the main unit.  
Watching Video Equipment  
1. Connect the other equipment to the monitor using a standard AV Cable (not included).  
2. Turn on the monitor.  
3. Turn on the video equipment and follow the instructions provided with it to playback.  
Note:  
make sure to use the correct audio/Video cable. Connecting the plugs incorrectly may cause  
a weak signal.  
• If you have a mono VCr, the volume level from the speakers will be low.  
E - 10  
 
811-798191W012.indd 10  
4/1/2008 5:00:58 PM  
CONNECTIONS  
E. Using the Monitor with Other Equipment while Playing a DVD on the Main  
Unit  
you can use a game console or other video equipment on the monitor while playing a DVD  
on the main unit.  
Watching Video Equipment with the Monitor while Playing a DVD in the Main Unit  
1. Connect only the plug connector between the main unit and the monitor. Do not connect  
the audio/Video portion of the DC-aV cable.  
2. Connect the monitor to the other equipment using a standard AV cable (not included).  
3. Turn on the main unit, the monitor and the other equipment.  
4. Play a DVD on the main unit.  
5. Use the monitor for the other equipment.  
Note:  
make sure to use the correct audio/Video cable. Connecting the plugs incorrectly may cause  
a weak signal.  
• If you have a mono VCr, the volume level from the speakers will be low.  
F. Using Headphones/Earphones  
Turn down the volume before connecting  
Headphones/earphones  
the headphones/earphones. slowly raise  
(1/8” [3.5mm] diameter plug)  
the volume with the headphones on until  
you reach your desired volume. When  
headphones are connected, the speaker is  
automatically disabled.  
Caution:  
Avoid listening to sound at excessive levels  
which could be harmful to your ears.  
E - 11  
 
811-798191W012.indd 11  
4/1/2008 5:00:59 PM  
PLACEMENT  
A. Mounting in the Vehicle  
Use the supplied mounting straps to install the main unit and monitor on the back of the vehicle's  
headrests. Tightly wrap the mounting strap around the headrest.  
SAFETy WARNING!  
• This unit should never be used by the vehicle's driver or left unsecured in the vehicle  
while driving.  
• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does  
not obstruct any safety device, including air bags or seat belts.  
• All passengers should wear seat belts when using this unit in a moving vehicle.  
• If in doubt, please contact your vehicle manufacturer for further advice.  
E - 12  
 
811-798191W012.indd 12  
4/1/2008 5:00:59 PM  
PLACEMENT  
B. Using the Stand  
You can stand the main unit/monitor up on a desk or table using the stand on the back.  
SOUND SySTEM  
DOLBy DIGITAL  
Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically  
recognizes DVDs that have been recorded with Dolby Digital.  
Not all Dolby Digital sources are recorded with 6 channels.  
Some sources marked Dolby Digital may be recorded in Dolby  
Surround, a 2 channel system. Look for this logo on your unit.  
Manufactured under license from Dolby Laboratories.  
‘Dolby’ and the double-D  
symbol are trademarks of Dolby Laboratories.  
E - 13  
 
811-798191W012.indd 13  
4/1/2008 5:00:59 PM  
CD/DVD OPERATION  
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to  
limit operation during playback. For example, many DVDs do not allow users to skip government  
warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the  
instruction notes of discs.  
” may appear on the screen during operation. A “  
” means that the desired operation is  
not permitted by the unit or disc.  
PLAyING A DISC  
1. Slide the STANDBy/ON switch to the ON position. (Slide the ON/OFF switch on the  
monitor to the ON position.  
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.  
2. Press the  
button and hold the front panel to open the disc door.  
3. Hold the disc by its edge and gently push it onto the spindle, with the label side facing  
the front, until you hear a “click”.  
4. Push the disc door gently to close it. It takes a short while for your unit to load the disc.  
After loading, for most DVDs, the unit will automatically take you to the main menu  
or start playing. If the unit does not automatically start playing the DVD, press the  
PLAy button.  
PLAyING A PICTURE FILE DISC  
This unit can play picture files recorded on CD-R and CD-RW discs.  
1. Press the  
button and hold the front panel to open the disc door.  
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing  
the front, until you hear a “click”.  
3. Push the door gently to close it. The picture files on the disc will be displayed one by  
one automatically.  
4. Press the STOP button to go to the folder list.  
5. Press the  
playback.  
Note:  
or  
button to highlight a file to play. Press the  
PLAy button to start  
You can press the PAUSE button to interrupt playback, and press the  
PLAy button  
to resume playback.  
You also can use the GOTO function or use the numbered buttons to enter the image  
number to quickly select any image.  
• Press the ANGLE button on the remote control to rotate the picture orientation by  
90°.  
ANGLE SELECTION (DVD)  
Some DVDs contain scenes that have been shot from a number of different angles. For  
these discs, the same scene can be viewed from each of these different angles.  
1. While you are playing a DVD with different angles  
recorded, press the ANGLE button to view the number  
of current angles available.  
Sequence of angle shots  
(Example)  
2. Press the ANGLE button repeatedly to change the scene  
to the next angle in those recorded.  
about two seconds later, playback continues from  
the new angle selected.  
If no button is pressed within 10 seconds, playback  
continues without changing the current angle.  
Note:  
this function can only be used for discs on which scenes shot from multiple angles have  
been recorded.  
• If only one angle is recorded, “  
” is displayed.  
E - 14  
 
811-798191W012.indd 14  
4/1/2008 5:00:59 PM  
SPECIAL FUNCTIONS  
DISPLAy FUNCTION (DVD)  
While the disc is playing, press the DISPLAy button repeatedly to display information on  
operation status:  
LOCATING A SPECIFIC TITLE (DVD)  
If a DVD contains title numbers, you can locate a specific title by directly selecting a  
title number.  
1. In STOP mode, press the GOTO button.  
2. Press the or button to highlight a specific field  
and press the corresponding number button(s) for the title you want.  
3. Press the ENTER button to confirm. Playback starts from the selected title.  
LOCATING A SPECIFIC CHAPTER / TRACK  
If you know the chapter / track number you want to play, you can locate a specific chapter /  
track by directly selecting a chapter / track number.  
1. Press the GOTO button to search for your desired  
chapter / track.  
2. Press the or button to highlight a chapter / track then press the corresponding number  
button(s) for the chapter /track you want.  
3. Press the ENTER button to confirm. Playback starts from the selected chapter / track.  
LOCATING A SPECIFIC TIME  
you can move to a specific location by entering its corresponding time (hours, minutes,  
seconds)  
1. Press the GOTO button twice.  
2. Press the corresponding number buttons for the setting  
point you want.  
3. Press the ENTER button to confirm. Playback starts from the selected location.  
Note:  
some discs may not respond to this process.  
some scenes may not be located as precisely as specified.  
this method for accessing specific locations is available only within the current title of  
the DVD.  
E - 15  
 
811-798191W012.indd 15  
4/1/2008 5:00:59 PM  
REPEAT PLAyBACK  
you can play a specific title or chapter repeatedly. (Chapter repeat, title repeat, A-B  
repeat)  
REPEATING A CHAPTER (DVD)  
you can play the same chapter repeatedly.  
1. While the disc is playing, press the REPEAT button until the “  
” indicator  
displays on the screen. The current chapter is played repeatedly.  
REPEATING A TITLE  
you can play the same title repeatedly.  
2. While the disc is playing, press the REPEAT button until the “  
on the screen. The current title is played repeatedly.  
” indicator displays  
” indicator displays  
TO RESUME NORMAL PLAyBACK  
3. While the disc is playing, press the REPEAT button until the “  
on the screen.  
you can play a single track or an entire disc repeatedly.  
REPEATING A SINGLE TRACK (CD)  
you can play the same track repeatedly.  
1. While the disc is playing, press the REPEAT button until the “  
on the screen. The current track is played repeatedly.  
” indicator displays  
” indicator displays  
REPEATING AN ENTIRE DISC  
2. While the disc is playing, press the REPEAT button until the “  
on the screen. The entire disc is played repeatedly.  
TO RESUME NORMAL PLAyBACK  
3. Press the REPEAT button until the “  
” indicator displays on the screen.  
REPEATING A SPECIFIC SECTION (DVD / CD)  
you can play a specific section repeatedly.  
1. While the disc is playing, press the A-B button at the beginning of the section (  
is  
displayed) you want to play repeatedly.  
2. Press the A-B button again at the end of the section (  
repeatedly.  
is displayed) you want to play  
3. The unit will immediately begin replaying your selection.  
TO RESUME NORMAL PLAyBACK  
4. While the disc is playing, press the A-B button until the “  
” indicator displays  
on the screen.  
Note:  
a-B repeat can only be used within the same title. If the start and end of the section to  
be repeated are in different titles, A-B repeat is cancelled.  
the a-B repeat function does not operate in scenes where different camera angles are  
recorded.  
E - 16  
 
811-798191W012.indd 16  
4/1/2008 5:00:59 PM  
DVD PROGRAMMABLE PLAyBACK  
PROGRAMMABLE MEMORy  
the two types of programmed playback provided by this unit is title/chapter programmed  
playback.  
TITLE/CHAPTER PROGRAMMED PLAyBACK (DVD)  
1. Press the MEMORy button in PLAy mode.  
2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For  
example : 01 02, 02 05, 02 11) It will move to the next item automatically.  
3. Repeat steps 2 to add additional titles and chapters.  
4. Press the  
PLAy button to start the programmed playback.  
CUSTOMIZING THE DVD FUNCTION SETTINGS  
LANGUAGE SETUP  
1. In STOP mode, press the SETUP button.  
2. Use the or button to select the option (OSD  
Language, Audio, Subtitle or Disc Menu), then  
press the button.  
3. Use the  
or  
button to select your preferred  
language, then press the ENTER button to  
confirm.  
4. Pressthe buttontogobacktothepreviousmenu.  
Repeat steps 2 and 3 to adjust other options.  
5. To exit the SETUP MENU and return to the normal screen, press the RETURN button.  
Note:  
some DVDs may not play in the audio language selected. a prior language may be  
programmed on the disc.  
some DVDs may be set to display subtitles in a language other than the one selected.  
A prior subtitle language may be programmed on the disc.  
some DVDs allow you to change subtitle selections via the disc menu only. If this is the  
case, press the MENU button and choose the appropriate subtitle from the selection on  
the disc menu.  
some DVDs may not included your pre-selected language. In this case, the DVD player  
automatically displays disc menus consistent with the discs initial language setting.  
E - 17  
 
811-798191W012.indd 17  
4/1/2008 5:01:00 PM  
CUSTOMIZING THE DVD FUNCTION SETTINGS  
VIDEO SETUP  
1. In STOP mode, press the SETUP button.  
2. Press the  
SETUP appears.  
3. Use the or  
or  
button repeatedly until VIDEO  
button to select the option  
(Brightness or Contrast), then press the button.  
Use the or button to make adjustments, then  
press the ENTER button. (The screen will change  
to your selected setting).  
4. Repeat steps 2 and 3 above to adjust other options.  
5. To exit the SETUP MENU and return to the normal screen, press the RETURN button.  
SySTEM SETUP  
1. In STOP mode, press the SETUP button.  
2. Press the  
SETUP appears.  
3. Use the or  
or button repeatedly until SySTEM  
button to select the option (Tv  
Display or Default), then press the button. Use  
the or button to make adjustments, then press  
the ENTER button. (The screen will change to your  
selected setting).  
4. Repeat steps 2 and 3 above to adjust other  
options.  
5. To exit the SETUP MENU and return to the normal screen, press the RETURN button.  
TV DISPLAy  
Cut off when a wide-  
screen video image is  
Pan Scan  
played.  
• When wide-screen video is played, this mode clips the right and  
left sides of the image so that it can be viewed on a conventional  
screen.  
some wide-screen DVDs that do not permit Pan scan mode playback  
are automatically played in letterbox mode (black bands that appear  
at the top and bottom of the screen).  
Letter Box  
PAN SCAN  
• When wide-screen video is played in this mode on a conventional  
screen, black bands appear at the top and bottom of the screen.  
Wide screen  
this is the correct mode for playing wide-screen videos on the unit  
or other external wide-screens.  
LETTER BOX  
Note:  
the displayable picture size is preset on the DVD. therefore the  
playback picture of some DVDs may not conform to the picture  
size you select.  
WIDE SCREEN  
• When you play DVDs recorded in the 4:3 aspect ratio, the playback  
picture will always appears in the 4:3 aspect ratio regardless of the TV TyPE setting.  
DEFAULT  
It takes 3-5 seconds to reset the DVD settings to the factory default.  
E - 18  
 
811-798191W012.indd 18  
4/1/2008 5:01:00 PM  
TROUBLE SHOOTING GUIDE  
SyMPTOM  
CAUSE (AND REMEDy)  
No power.  
ensure the car power adapter is connected.  
turn on the unit.  
The remote does not remove any obstacles between the remote and the unit.  
function.  
• Use the remote near the unit.  
• Point the remote at the remote sensor on the unit.  
replace the battery in the remote with new ones.  
DVD  
make sure that you’ve selected DVD mode.  
the system is in pause mode. Press the  
return to normal play mode.  
No sound or only a  
very low-level sound  
is heard.  
PLAy button to  
fast forward or fast reverse is performed. Press the  
PLAy  
button to return to normal play mode.  
make sure the aUDIo /VIDeo output/input connections are  
correct.  
the Dts DVD cannot be decoded to have speaker output.  
this unit is too hot. Power off the unit for 30 minutes to cool  
down.  
No picture  
the region number of the disc doesn’t match the region  
number of this unit.  
The picture is not  
clear  
• Clean the disc.  
the disc is scratched.  
Severe hum or noise  
is heard.  
the plugs and jacks are dirty. Wipe them with a cloth slightly  
moistened with alcohol.  
• Clean the disc.  
The disc does not  
play.  
there is no disc inside (“no Disc” appears on the screen).  
• Insert the disc correctly with the playback side facing  
frontward.  
• Clean the disc.  
a non-ntsC disc has been inserted. the unit and disc region  
number are incompatible.  
• Condensation may have formed inside the unit due to a sudden  
change in temperature. Wait about an hour for it to clear and  
try again.  
Specifications and appearance are subject to change without notice.  
E - 19  
 
811-798191W012.indd 19  
4/1/2008 5:01:00 PM  
LIMITED WARRANTy  
VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty.This limited warranty extend  
to the original consumer purchaser and is limited to non-commercial use of the product.  
Ninety (90) Day Parts & Labor Warranty  
VENTURER products purchased in the United States are warranted to be free from defects in materials or  
workmanship for a period of ninety (90) days from the date of their original retail purchase. If the unit fails  
to conform to this warranty, we will service the product using new or refurbished parts and products, at  
VENTURERs sole discretion.  
During a period of ninety (90) days from the effective warranty date, VENTURER will provide, when needed,  
service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in  
the Untied States, you must first call our Customer Support Center at 1-800-252-6123 o 1-866-444-6478,  
during the hours listed in the box below. The determination of service will be made by VENTURER Customer  
Support. PLEASE DO NOT RETURN yOUR UNIT TO VENTURER WITHOUT PRIOR AUTHORIZATION.  
New or remanufactured replacements for defective parts or products will be used for repairs byVENTURER at  
its designated Service Center for ninety (90) days from the effective warranty date. Such replacement parts or  
products are warranted for an additional ninety (90) days from the date of repair or replacement. The Customer  
will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to  
make the necessary repairs. The customer is responsible for all transportation charges to the service facility.  
Packaging and Shipping Instruction  
When you send the product to the Venturer service facility you must use the original carton box and packing  
material or an equivalent as designated by VENTURER.  
LIMITED WARRANTy  
yOUR RESPONSIBILITy  
(1) you must retain the original sale receipt to provide proof of purchase.  
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.  
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts  
which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper  
operation or maintenance, or use in violation of instructions provided with the product, or to product  
which has been altered or modified without authorization of Venturer, or to products or parts thereof  
which have had the serial number removed or changed.  
OUT OF WARRANTy  
In the event your product requires repair after the limited warranty period has expired, please contact our  
Customer Support Center at 1-800-252-6123, 1-866-444-6478 or www.venturer.com  
Hours: Monday–Thursday: 9–7, Friday: 9–5, Saturday: 9–12 EST.  
IMPORTANT:  
yOU ARE RESPONSIBLE FOR ANy TRANSPORTATION, SHIPPING OR INSURANCE RELATIVE TO THE  
RETURN OF PRODUCT TO OUR PRODUCT RETURNS CENTER.  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a  
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the  
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and  
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with  
respect to the repair or replacement of any parts. In no event shall VENTURER be liable for consequential or  
incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation  
of VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof,  
is hereby limited to ninety (90) days from the date of purchase. This limitation does not apply to implied  
warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state  
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be  
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may  
not apply to you.  
For more information on other products and services, please visit out website at www.venturer.com.  
Important: Also keep your “Bill of Sale” as proof of purchase.  
Model no. ............................................................ Product name .....................................................  
Type of set ..............................................................................................................................................  
Serial no. .............................................................. Invoice no. .............................................................  
Date purchased .................................................... Dealer name ..........................................................  
Printed in China  
© 2008 VENTURER Electronics Inc.  
811-798191W012  
 
811-798191W012.indd 20  
4/1/2008 5:01:00 PM  

Thule Automobile Accessories 037 User Manual
Toshiba Personal Computer SATELLITE U200 User Manual
Traulsen Refrigerator RET132EUT HHS User Manual
Tricity Bendix Cooktop CLASSIC 1 User Manual
Tripp Lite Computer Accessories NB1007GY User Manual
Tripp Lite Portable Generator 200502023 User Manual
Tripp Lite Welding System APSX6048VRNET User Manual
Viking Refrigerator DDRB304 User Manual
Vivitar Digital Camera Vivicam 3695 User Manual
VTech Cell Phone CS6114 User Manual