Venturer TV Converter Box STB7766G1 User Manual

STB7766G1  
ATSC Converter Box  
Instruction Manual  
Need More Help?  
DO NOT RETURN THIS PRODUCT TO THE STORE  
Please visit online help at  
 
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong.The wide blade or the third prong is provided for your safety.When the provided  
plug does not fit into your AC power outlet, consult an electrician for replacement of the obsolete  
outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination  
to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods  
of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when  
Portable Cart  
Warning  
the apparatus has been damaged in any way, such as the power-supply cord  
or plug is damaged, liquid has spilled or objects have fallen into the apparatus,  
theapparatushasbeenexposedtorainormoisture,doesnotoperatenormally,  
or has been dropped.  
- 2 -  
 
ACCESSORIES  
AC Adapter .............................................................................................................................. x 1  
Remote Control ........................................................................................................................ x 1  
AAA Batteries (for Remote Control) ......................................................................................... x 2  
RF Cable .................................................................................................................................. x 1  
CONTENTS  
Safety Precautions ...................................... 1  
Important Safety Instructions ..................... 2  
Accessories ................................................. 3  
Contents ....................................................... 3  
Remote Control .................................................4  
QuickStartGuide...........................................5-8  
ControlReferenceGuide.............................9-10  
Connections ...................................................11  
ConnectingaTV(UsingtheRFCable).................11  
ConnectingaTV(UsingtheAVCable)..................11  
Power Supply ................................................. 12  
UsingtheACAdapter.........................................12  
TurningontheUnit..............................................12  
Dolby Digital ......................................................12  
Basic Operation ..............................................13  
SearchingforChannelsAutomatically................13  
ViewingtheTVChannel.....................................13  
Adjusting theVolume .........................................13  
Viewing the Information .....................................13  
Viewing Signal ..................................................13  
On-Screen Menu-Channel ....................... 14-15  
ChannelScan/Add/Edit.....................................14  
Manual Scan .....................................................14  
Output Channel .................................................15  
On-Screen Menu-Option ...........................15-17  
Clock ................................................................15  
Aspect Ratio ......................................................15  
Language .........................................................16  
Audio Language ................................................16  
Caption Select ..................................................16  
DCCView ..........................................................17  
Power Save Mode ............................................17  
Analog Audio ............................................ 17  
On-Screen Menu-Lock ............................. 18-20  
Lock System .....................................................18  
Set Password ....................................................18  
Block Channel ...................................................18  
TV Rating-Children ............................................19  
TV Rating-General ...........................................19  
Movie Rating .....................................................20  
Downloadable RRT ...........................................20  
Maintenance ................................................... 21  
Troubleshooting Guide ...................................21  
- 3 -  
 
REMOTE CONTROL  
Point the remote control at the REMOTE SENSOR located on the unit.  
When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR  
may be degraded, causing unreliable operation.  
The recommended effective distance for remote operation is about 16 feet (5 meters).  
To Install Batteries  
1. Open the battery door.  
2. Insert two AAA batteries.  
Battery Replacement  
When the batteries become weak, the operating distance of the remote control is greatly reduced  
and you will need to replace them.  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same  
or equivalent type.  
Notes:  
If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion  
damage caused by battery leakage.  
Do not mix old and new batteries.Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable  
(NICKEL-CADMIUM) batteries.  
Always remove batteries as soon as they become weak.  
Weak batteries can leak and severely damage the remote control.  
WARNING: Do not dispose of batteries in a fire. Batteries may explode or leak.  
- 4 -  
 
QUICK START GUIDE  
STEP 1: CONNECTIONS  
When this converter box is powered on, digital signals from the ANTENNA RF IN jack are converted  
to analog signals and output from the TV RF OUT jack or the VIDEO OUT jack.  
When this converter box is in standby state, analog RF TV signals pass through the box and output  
from the TV RF OUT jack.  
Option One: Using the RF Cable to Connect a TV  
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.  
2. Use the RF cable (included) to connect the unit and TV/Monitor.  
3. Use the AC adapter (included) to connect a suitable wall outlet.The supplied 9V adapter operates  
on AC 120V ~ 60Hz.  
4. Turn on your TV and switch TV’s channel selection to Channel 3 .  
Note:  
If a local TV Station happens to broadcast on Channel 3, we recommend you switch the unit’s  
Output Channel to Channel 4 (and switch TV to Channel 4), following the instructions on Page 15.  
Rear of TV  
Option Two: Using the AV Cable to Connect a TV  
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.  
2. Use the AV Cable (not included) to connect the unit and TV/Monitor.  
3. Use the AC adapter (included) to connect a suitable wall outlet.The supplied 9V adapter operates  
on AC 120V ~ 60Hz.  
4. Turn on your TV and follow the instructions included with it to select the “AV IN” function.  
YELLOW  
RED  
WHITE  
Rear of TV  
YELLOW  
RED  
WHITE  
Warning: This system does not support cable TV.  
- 5 -  
 
QUICK START GUIDE  
STEP 2: TURNING ON THE UNIT  
1. While the AC adapter is connected and the unit is on standby, power will be consumed and the  
power indicator is RED.  
2. Press the STANDBY/ON button to turn on the unit. The power indicator is GREEN.  
STEP 3: SETTING THE OSD LANGUAGE  
1. Press the MENU button on the remote  
control.  
2. Use the  
menu.  
/
buttons to select the OPTION  
3. Use the  
button to select Language then  
press the ENTER button or the button.  
4. Use the buttons to select English /  
/
Español (Spanish) / Français (French).  
5. Press the EXIT button on the remote control to  
exit menu.  
DCC View  
Power Save Mode  
Analog Audio  
STEP 4: SEARCHING FOR CHANNELS AUTOMATICALLY  
1. Press the MENU button on the remote  
control.  
2. Use the  
menu.  
/
buttons to select the CHANNEL  
3. Use the button to select Channel Scan and  
press the ENTER button or the button to start  
scanning.  
STEP 5: VIEWING THE TV CHANNEL  
Press the CH-/CH+ buttons to select a channel, or press the number button on the remote to select  
the channel you want to watch.  
For channels 1 to 9, enter a one-digit channel number.  
For channels 10 to 69, enter the two-digit channel number.  
Please read the Instruction Manual for further details on using the Converter Box.  
- 6 -  
 
QUICK START GUIDE  
DISPLAY CONTENTS  
When receiving a 16:9 digital broadcast signal, STB7766G1 Digital TV Converter will convert the  
16:9 picture to fit a 4:3 TV screen. Enter Aspect Ratio Menu to select among four conversion  
modes.  
AUTO MODE (DEFAULT)  
Displays all programs based on the aspect ratio of the program to 4:3 TV screen.  
Auto  
DCC View  
Power Save Mode  
Analog Audio  
CROPPED MODE  
This mode uses the entire screen of your TV, but the left and right end of the picture will be removed  
on 4:3 TV screen.  
Cropped  
- 7 -  
 
QUICK START GUIDE  
Letter Box Mode  
The entire 16:9 picture will be displayed on your TV, but there will be unused areas (black bars) along  
the top and bottom edges of your TV screen.  
Letter Box  
SQUEEZED MODE  
The entire 16:9 picture will be filled up your TV display but there will be distorted in the picture.  
Squeezed  
USING A 16:9 TV WITH THE DIGITAL TV CONVERTER  
It is recommended that you use the Squeezed option to obtain the best picture format.  
- 8 -  
 
CONTROL REFERENCE GUIDE  
Remote Control  
1)  
MUTE Button  
Press to turn off the sound.  
2) MENU Button  
Press to display the on-screen menu or switch  
back to the previous menu screen.  
1
2
7
8
3) CURSOR (  
,
,
,
) Buttons  
Use to highlight selections on a menu screen  
and adjust certain settings.  
ENTER Button  
Confirm selection on a menu screen.  
3
4
4) INFO Button  
Press to display information on the current  
channel.  
9
5) VOL + / VOL - Button  
Press to increase/decrease the volume.  
6) CC Button  
Press to change the Closed Caption  
appearance. This function only works on  
programs broadcasted with captions.  
7) STANDBY/ON Button  
10  
5
Press to turn ON the unit or put it in STANDBY  
(OFF) mode.  
8) EXIT Button  
11  
12  
Press to exit from the on-screen menu or a  
pop-up display.  
9) SIGNAL Button  
6
Press to display TV signal quality.  
10) CH  
/ CH  
Buttons  
Press to select the channel upward or  
downward.  
11) NUMERIC Buttons  
Press to enter numbers or go directly to a  
specific channel.  
12) LAST CH  
Press to switch repeatedly between the last  
two channels displayed.  
• [dot] Button  
Press to enter digital sub-channels with the  
numeric buttons (i.e. 11.3 or 12.7).  
- 9 -  
 
CONTROL REFERENCE GUIDE  
3 4  
1
2
Front View  
Back View  
5
6
7
8
1) Remote Sensor  
6) TV RF OUT Terminal  
Receives infrared signals from the remote  
control.  
2) CH-/CH+ Buttons  
UsetoconnectyourTVusingacoaxialcable.  
When this Conventer Box is powered on,  
analog RF signals output from the TV RF  
OUT terminal.  
Press to select the channel upward or  
downward.  
WhenthisConventerBoxisinstandbystate,  
analog RF TV signals pass through the box  
and output from the TV RF OUT terminal.  
3)  
Button  
Turns the power on or restores the unit to  
the standby mode.  
7) AUDIO OUT / VIDEO OUT Jacks  
4) STANDBY/ON Indicator  
Green: power on  
Outputs audio/video signals to a connected  
TV.  
Red: standby mode  
8) DC IN 9V Jack  
5) ANTENNA RF IN Terminal  
Connect the supplied AC adapter.  
Connect the AIR antenna.  
- 10 -  
 
CONNECTIONS  
When this converter box is powered on, digital signals from the ANTENNA RF IN jack are converted  
to analog signals and output from the TV RF OUT jack or the VIDEO OUT jack.  
When this converter box is in standby state, analog RF TV signals pass through the box and output  
from the TV RF OUT jack.  
Connecting a TV (Using the RF Cable)  
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.  
2. Use the RF cable (included) to connect the unit and TV/Monitor as shown.  
3. Turn on your TV and switch TV’s channel selection to Channel 3.  
Note:  
If a local TV Station happens to broadcast on Channel 3, we recommend you switch the unit’s  
Output Channel to Channel 4 (and switch TV to Channel 4), following the instructions on Page 15.  
Rear of TV  
Connecting a TV (Using the AV Cable)  
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.  
2. Use the AV Cable (not included) to connect the unit and TV/Monitor as shown.  
Note:  
Make sure to turn on your TV and follow the instructions included with it to select the “AV IN”  
function.  
RED  
WHITE  
YELLOW  
RED  
WHITE  
YELLOW  
Rear of TV  
Warning: This system does not support cable TV.  
- 11 -  
 
POWER SUPPLY  
Using the AC Adapter  
The supplied 9V adapter operates on AC 120V ~ 60Hz.  
While the AC adapter is connected and the unit is on standby, power will be consumed and the power  
indicator is RED.  
Cautions:  
The AC adapter included with this unit is for its use only. Do not use it with other equipment.  
When the unit is not going to be used for a long period of time, disconnect the AC adapter from  
the AC power outlet.  
When the AC adapter is plugged in, the apparatus is not completely disconnected from the main  
power supply, even when the power is turned off.  
Turning on the Unit  
Press the STANDBY/ON button to turn on the unit. The power indicator is GREEN.  
Dolby Digital  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
- 12 -  
 
BASIC OPERATION  
Searching for Channels Automatically  
1. Press the MENU button on the remote control.  
2. Use the buttons to select the CHANNEL menu.  
/
3. Use the button to select Channel Scan and press  
the ENTER button or the button to start scanning.  
Notes:  
The unit MUST be connected to an antenna in order  
to receive digital TV signals.  
If you wish to stop scanning in the middle of the  
scanning process, press the ENTER button.  
Viewing the TV Channel  
Viewing a television station after searching for channels.  
Press the CH  
/ CH  
buttons to select a channel, or press the number button on the remote to  
select the channel you want to watch.  
For channels 1 to 9, enter a one-digit channel number.  
For channels 10 to 69, enter the two-digit channel number.  
Adjusting the Volume  
You can control the volume using the buttons on the remote control.  
VOL-/VOL+ Buttons  
Use these buttons to increase or decrease the volume.  
MUTE Button  
This button is used to mute the sound of the unit. No audio will be heard once this button is  
pressed.  
To cancel the mute action, press the  
MUTE button again.  
Viewing the Information  
You can view information for the current TV program by pressing the INFO button on the remote  
control.  
The INFO shows:  
The major channel number and the minor channel number if you are viewing a digital channel  
Current time and date  
Program title and other information if available  
The current program’s rating  
Broadcast format of current program  
Multilingual  
Caption  
To hide INFO:  
Press the INFO button again or press the EXIT button.  
Viewing Signal  
To view the signal quality, press the SIGNAL button on the remote control. A beep sound will be  
heard.  
- 13 -  
 
ON-SCREEN MENU - CHANNEL  
Use the menu configuration to set detailed options for each function. Press the MENU button on the  
remote control to open the menu screen.  
To return to the previous menu press the MENU button on the remote control.  
To exit the menu screen press the EXIT button on the remote control.  
Channel Scan  
See “Searching for Channels Automatically” for details.  
Channel Add  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttonstoselectthe CHANNELmenu.  
3. Use the button to select Channel Add then press  
the ENTER button or the button.  
Note: Valid channels which are already stored before  
you use Channel Add will be skipped during the  
channel scan process.  
Channel Edit  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the CHANNEL menu.  
3. Use the button to select Channel Edit then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the channel number  
then press the ENTER button.  
Manual Scan  
In the case of Terrestrial TV with an indoor/outdoor antenna, Channel Scan may not find all existing  
channels because a certain channel may require the antenna to be adjusted to different orientation.  
You can add such a channel by entering the channel number manually.  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the CHANNEL menu.  
3. Use the button to select Manual Scan then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the channel number  
then press the ENTER button.  
- 14 -  
 
ON-SCREEN MENU - CHANNEL  
Output Channel  
You can select NTSC RF output channel.  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the CHANNEL menu.  
3. Use the button to select Output Channel then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the channel number.  
ON-SCREEN MENU - OPTION  
Clock  
1. Press the MENU button on the remote control.  
2. Use the  
3. Use the  
/
buttons to select the OPTION menu.  
ON-SCREEN MENU -
button to select Clock then press the  
ENTER button or the button.  
4. Press the  
/
buttons to select the Time Zone  
(Eastern/Central/Mountain/Pacific/Alaska/Hawaii/  
New F.land/Atlantic).  
DCC View  
Power Save Mode  
Analog Audio  
Aspect Ratio  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
Auto  
3. Use the button to select Aspect Ratio then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the options (Auto/Letter  
DCC View  
Power Save Mode  
Box/Cropped/Squeezed).  
Analog Audio  
Auto: Displays all programs based on the aspect ratio of the program.  
Letter Box: Displays all programs in 16:9 aspect ratio.  
Cropped: No change on the ratio, but the picture is cropped.  
Squeezed: All programs are displayed to fit on the screen.  
- 15 -  
 
ON-SCREEN MENU - OPTION  
Language  
1. Press the MENU button on the remote control.  
2. Use the buttons to select the OPTION menu.  
/
3. Use the button to select Language then press the  
ENTER button or the button.  
4. Use the  
/
buttons to select English / Español  
DCC View  
Power Save Mode  
Analog Audio  
(Spanish) / Français (French).  
Audio Language  
When you change the channel on DigitalTV, you may be able to listen to the audio in an alternate  
language by selecting the appropriate language option. If there is no selected audio language,  
the primary audio signal transmitted by the TV broadcaster is selected automatically.  
Note: Not all TV channels broadcast with multiple languages.  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
3. Use the  
button to select Audio Language then  
press the ENTER button or the button.  
4. Use the  
/
buttons to select the audio language  
(English / Spanish / French).  
DCC View  
Power Save Mode  
Analog Audio  
Caption Select  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
3. Use the button to select Caption Select then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the options  
(ACC/DCC/DCC Service).ACCis AnalogTV Closed  
Caption. “DCC” is Digital TV Closed Caption.  
DCC View  
Power Save Mode  
Analog Audio  
5. Use the  
/
buttons to make adjustments.  
Standard: Use the default digital caption style from broadcaster.  
Custom: Activate the DCC View item and set your desired font settings.  
Notes:  
If DCC (Digital Closed Caption) is set to Custom, DCC View is activated.  
Caption is essential for a hearing-impaired person.  
If both ACC (Analog Closed Caption) and DCC are on service and both settings are ON, only  
DCC is displayed.  
ACC is available only when DCC is OFF.  
- 16 -  
 
ON-SCREEN MENU - OPTION  
DCC View  
Use this to set the character font. Only DCC (Digital Closed Caption) is set to Custom, DCC View  
is activated.  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
Standard  
3. Use the button to select DCC View then press the  
ENTER button or the button.  
4. Use the  
/
buttons to select the options, then use  
the  
/
buttons to make adjustments.  
DCC View  
Power Save Mode  
Analog Audio  
Note:  
To activate DCC View, DCC on Caption Select should  
be set to ‘Custom’.  
Power Save Mode  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
3. Use the  
button to select Power Save Mode then  
press the ENTER button or the button.  
4. Use the buttons to select the options  
/
DCC View  
Power Save Mode  
(Off / 1 hour / 2 hours / 4 hours / 8 hours).  
Analog Audio  
Power Save Mode is the function to automatically switch  
from the ON state to the Sleep state after a period of time  
without user input.  
Note:  
This product is currently set to Power Save Mode.It will not receiveTV signal after 4 hours of inactivity.  
Analog Audio  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the OPTION menu.  
3. Use the button to select Analog Audio then press  
the ENTER button or the button.  
4. Use the  
/
buttons to select the analog audio  
(Mono / Stereo).  
DCC View  
Power Save Mode  
Mono  
Stereo  
Mono: Select Mono if you watch TV by TV RF OUT  
Analog Audio  
terminal.  
Stereo:Select Stereo if you watch TV by VIDEO OUT  
terminal.  
- 17 -  
 
ON-SCREEN MENU - LOCK  
Lock System  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the LOCK menu.  
3. Use the  
button to position the cursor on the input field and enter password. If you have not  
specified the password, input the factory-default code, “0000”.  
4. Use the  
5. Use the  
/
/
buttons to select Lock System then press the ENTER button or the button.  
buttons to select On/Off.  
RRT  
RRT  
Set Password  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the LOCK menu.  
3. Use the  
/
buttons to select Set Password then  
press the ENTER button or the button.  
4. Enter values (4 digit) for new password and again to  
confirm password.  
RRT  
Notes:  
Remember your password if you have changed it.  
If you forget the password,enter “8888” to unlock parental control.  
Block Channel  
1. Press the MENU button on the remote control.  
2. Use the  
/
buttons to select the LOCK menu.  
3. Use the  
/
buttons to select Block Channel then  
press the ENTER button or the button.  
4. Use the  
/
buttons to select Antenna Channel then  
press the ENTER button.  
RRT  
- 18 -  
 
ON-SCREEN MENU - LOCK  
TV Rating-Children  
TV Rating-Children is for classifying the age level of TV programs for children.  
1. Press the MENU button on the remote control.  
2. Use the  
3. Use the  
/
/
buttons to select the LOCK menu.  
buttons to select TV Rating-Children  
then press the ENTER button or the button.  
4. Use the buttons to select Age or Fantasy  
/
Violence then press the ENTER button or the  
button.  
5. Use the  
RRT  
/
buttons to block/unblock rating. If  
Blocking is set to ON, a lock icon is indicated.  
Age restriction has higher priority than the others (Fantasy Violence).  
TV Rating-General  
TV Rating-General is for classifying the age level of TV programs by the general criterion.  
1. Press the MENU button on the remote control.  
2. Use the  
3. Use the  
/
/
buttons to select the LOCK menu.  
buttons to select TV Rating-General  
then press the ENTER button or the button.  
4. Use the buttons to select the options (Age /  
/
Dialogue / Language / Sex / Violence) then press  
the ENTER button or the button.  
RRT  
5. Use the  
/
buttons to block/unblock rating. If  
Blocking is set to ON, a lock icon is indicated.  
Age restriction has higher priority than the others.  
The lock levels are equivalent to the following ratings.  
TV-Y:  
TV-Y7: Children 7 years and older.  
TV-G: General Audience.  
All children.  
TV-PG: Parental guidance suggested.  
TV-14: Parents strongly cautioned.  
TV-MA: Mature audience only.  
- 19 -  
 
ON-SCREEN MENU - LOCK  
Movie Rating  
1. Press the MENU button on the remote control.  
Permits all programs  
2. Use the  
/
buttons to select the LOCK menu.  
G
3. Use the  
/
buttons to select Movie Rating then  
PG  
PG-13  
R
press the ENTER button or the button.  
4. Use the buttons to select the rating.  
/
NC-17  
X
Blocking Off  
The lock levels are equivalent to the following ratings.  
G :  
GENERAL AUDIENCES, Suitable for all  
ages.  
PARENTAL GUIDANCE SUGGESTED  
- Some material may not be suitable for  
children.  
R :  
RESTRICTED, Under 17 requires  
accompanying parent or adult  
guardian for viewing in movie  
theaters.  
PG :  
NC-17 : No one 17 or under admitted in movie  
PG-13 : PARENTS STRONGLY CAUTIONED -  
Some material may be inappropriate for  
children under 13.  
theaters.  
Adults Only.  
X :  
Downloadable RRT  
1. Press the MENU button on the remote control.  
2. Use the  
3. Use the  
/
/
buttons to select the LOCK menu.  
buttons to select Downloadable RRT  
Rating Region Table  
Humo  
Inte  
then press the ENTER button or the button.  
4. Use the buttons to select the Rating RegionTable  
/
or Clear Rating Table then press the ENTER button or  
the button.  
5. Use the  
/
buttons to select the rating.  
Clear Rating Table  
Notes:  
Rating Region Table (RRT) options are different according to the current program.  
Select Clear Rating Table to reset the RRT options.  
- 20 -  
 
MAINTENANCE  
Cleaning the Unit  
Be sure to turn the unit off and disconnect the AC adapter before maintaining the unit.  
Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that  
has been dipped in a weak soap-and-water solution and wrung out thoroughly. Wipe with a dry  
cloth.  
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed  
air to remove dust.  
TROUBLESHOOTING GUIDE  
SYMPTOM  
CAUSE (AND REMEDY)  
No power.  
Ensure the AC adapter is connected.  
The unit is not turned on.  
Intermittent signal,  
or no signal at all  
Try to tune to another channel.  
Make sure the antenna connected.  
Adjust the antenna for a stronger signal.  
This system does not support cable TV.  
Poor sound quality,  
or no sound  
Make sure you have connected your audio system correctly.  
Try to tune to another channel. Sometimes broadcasters have problems  
with DTV audio encoding.  
Make sure the MUTE function on your TV is not set.  
Remove any obstacles between the remote and the unit.  
Use the remote near the unit.  
Remote control  
doesn’t work  
correctly  
Point the remote at the remote sensor on the unit.  
Replace the batteries in the remote.  
Specifications and external appearance are subject to change without notice.  
- 21 -  
 
LIMITED WARRANTY  
VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend  
to the original consumer purchaser and is limited to non-commercial use of the product.  
One Year Parts & Labor Warranty  
VENTURER products purchased in the United States are warranted to be free from defects in materials or  
workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform  
to this warranty, we will service the product using new or refurbished parts and products, at VENTURER’s sole  
discretion.  
During a period of 1 year from the effective warranty date, Venturer will provide, when needed, service labor  
to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied  
States, you must first call our Customer Support Center at 1-800-252-6123 during the hours listed in the box  
below. The determination of service will be made by Venturer Customer Support. PLEASE DO NOT RETURN  
YOUR UNIT TO VENTURER WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for  
defective parts or products will be used for repairs by Venturer at its designated Service Center for 1 year from  
the effective warranty date. Such replacement parts or products are warranted for an additional 1 year from the  
date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated  
at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all  
transportation charges to the service facility.  
Packaging and Shipping Instruction  
When you send the product to the Venturer service facility you must use the original carton box and packing  
material or an equivalent as designated by VENTURER.  
LIMITED WARRANTY  
YOUR RESPONSIBILITY  
(1) You must retain the original sale receipt to provide proof of purchase.  
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.  
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts  
which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper  
operation or maintenance, or use in violation of instructions provided with the product, or to product which  
has been altered or modified without authorization of Venturer, or to products or parts thereof which have  
had the serial number removed or changed.  
OUT OF WARRANTY  
In the event your product requires repair after the limited warranty period has expired, please contact our  
Customer Support Center at 1-800-252-6123 or www.venturer.com  
Hours: Monday–Thursday: 9–7, Friday: 9–5, Saturday: 9–12 EST.  
IMPORTANT:  
YOU ARE RESPONSIBLE FOR ANY TRANSPORTATION, SHIPPING OR INSURANCE RELATIVE TO THE  
RETURN OF PRODUCT TO OUR PRODUCT RETURNS CENTER.  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular  
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of  
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other  
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or  
replacement of any parts. In no event shall Venturer be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of  
VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof, is  
hereby limited to 1 year from the date of purchase. This limitation does not apply to implied warranties arising  
under state law.  
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state  
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be  
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may  
not apply to you.  
For more information on other products and services, please visit out website at www.venturer.com.  
Model no. ............................................................ Product name .....................................................  
Type of set ..............................................................................................................................................  
Serial no. .............................................................. Invoice no. .............................................................  
Date purchased .................................................... Dealer name ..........................................................  
FOR SERVICE AND REPAIR, PLEASE CALL 1-800-252-6123  
Printed in China  
811-776691W032  
 

Tascam CD Player CD 240 User Manual
Techno Source Handheld Game System High School Musical 3 Senior Year User Manual
Toastmaster Toaster TC13A3663 User Manual
Toshiba Air Conditioner RAV SP240AT2 UL User Manual
Triarch Indoor Furnishings 60162 User Manual
Tyco Home Security System Power608 User Manual
Ultimate Support Systems Video Game Keyboard JS XS300 User Manual
Verbatim MP3 Player VM 205 User Manual
Viking Range VDSC530 4B User Manual
Vivitar Digital Camera ViviCam 3345 User Manual