Verilux Marine Lighting VT01 User Manual

œ
VT01  
0,53  
=VeenA^iZ B^c^  
Hjch]^cZꢀHjeeaZbZciꢀA^\]iꢀHnhiZb  
 
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS UNIT TO RAIN OR MOISTURE.  
The exclamation point within an equilateral triangle alerts  
the user to the presence of important operating and  
maintenance instructions in this owner’s guide.  
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR  
PERSONAL INJURY:  
Turn off/unplug and allow to cool before replacing bulb or cleaning.  
• Do not look directly at the lighted bulb without the diffuser being in  
place.  
• Do not operate the lamp in close proximity to flammable or  
combustible vapors, such as aerosol (spray) products or where  
oxygen is being administered.  
• Use only the type of bulb and maximum wattage indicated by  
Verilux®.  
• Never cover the lamp when it is in operation.  
2
 
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions – before using this lamp.  
2. Keep these instructions – for future reference.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this lamp in damp/humid or wet locations.  
6. For indoor use only.  
7. Clean only with dry cloth.  
8. Do not block any ventilation openings.  
9. Do not place near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
10. Do not defeat the safety purpose of the polarized plug. A polarized  
plug has two blades with one wider than the other. The wider blade  
is provided for your safety. If the provided plug does not fit in your  
outlet, consult an electrician for replacement of the obsolete outlet.  
11. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where it exits the lamp.  
12. Only use attachments/accessories specified by the manufacturer.  
13. Unplug this lamp during lightning storms or when unused for long  
periods of time.  
14. If the lamp has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have  
fallen onto the lamp, the lamp has been exposed to rain or moisture,  
does not operate normally, or has been dropped, it should not be  
operated. There are no user serviceable parts within this lamp.  
SAVE THESE INSTRUCTIONS  
3
 
GENERAL PRECAUTIONS  
• Do not use with power supply voltage other than 120V AC  
• Avoid placing the lamp in areas that are dusty, humid/moist, lack  
ventilation, or are subject to constant vibration.  
• Not for use with light dimmers, timers, motion detectors, voltage  
transformers, or extension cords.  
• Do NOT use lubricating agent in bulb assembly.  
• Close supervision is recommended when this lamp is used by or  
near children, or others who may not understand the need for these  
precautions. Do not leave the lamp unattended during use.  
This lamp has been tested and found to comply with Part 18 of the  
FCC Rules. These limits are designed to provide reasonable protection  
against interference in a residential installation. This lamp generates,  
uses, and can radiate radio frequency energy and, if not used in  
accordance with the instructions, may cause interference to radio  
communications. If interference occurs try to correct the interference by  
one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the lamp and receiver.  
• Connect the lamp into an outlet on a circuit different from that to  
which the receiver is connected.  
• Move the lamp out of the line of sight of the remote control receiver.  
• Consult the dealer or an experienced radio/TV technician for help.  
Verilux, Inc. does not make any medical claims.  
Please consult a qualified physician before using  
any bright light system.  
4
 
SET-UP INSTRUCTIONS  
Unpacking  
Please remove all packaging material. Check the carton for the items  
pictured below:  
Lamp  
Diffuser  
Bulb  
Selecting a location  
• Place your Verilux® HappyLite® Mini Plus Sunshine Supplement  
Light System on a table or other flat surface.  
Note: Avoid placing this lamp in areas that are exposed to direct  
sunlight or close to heat-radiating products, such as heaters. Do not  
place the lamp on the top of appliances that radiate heat.  
WARNING: DO NOT BLOCK VENTS  
Vents are necessary for proper function of the electronic  
ballast; blocking them may cause overheating of the  
electronics and increase risk of fire.  
5
 
SET-UP INSTRUCTIONS  
Bulb & Diffuser installation  
1. Insert bulb into lamp by firmly holding bulb base and pushing down  
and rotating slightly in a clockwise direction to seat properly  
(See below)  
Note: Make sure bulb is fully inserted into the socket. The bottom of  
the bulb base should touch the plastic housing of the lamp.  
2. Attach the plastic diffuser to the lamp body by first inserting the tab  
located at the bottom of the diffuser (A) into the opening of the lamp  
base (B).  
3. Rotate the plastic diffuser and align the side snap tabs (C) into  
position – press firmly to snap parts together.  
Note: When first illuminated, bulb will need to “age” for about 10  
minutes in order to attain its proper brightness and color  
C
A
Hap  
py  
Li  
te  
B
6
 
BULB REPLACEMENT  
Bulb removal and replacement  
1. Unplug lamp from power source.  
2. To access the bulb, remove the plastic diffuser by depressing the  
tabs (D) and lifting it out.  
3. Firmly hold the bulb base (B) (Do not hold the glass portion of the  
bulb) and turn bulb in a slight counter-clockwise direction until it  
releases from the socket.  
4. To re-install bulb and plastic diffuser, see instructions on page 6  
B
D
7
 
TROUBLESHOOTING  
Before requesting service on your Verilux® lamp please read the  
following:  
• Make sure all power connectors, cords, and plugs are inserted fully  
and securely.  
• Be sure the bulb is securely seated in the socket. (See page 6)  
• Make sure there is power to the wall outlet or try another outlet – not  
connected to a dimmer.  
CARE & CLEANING  
Your Verilux® lamp is made from high quality materials that will last for  
many years with a minimum of care.  
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR  
CLEANERS CONTAINING ABRASIVES OR AMMONIA  
WARNING: To prevent risk of shock or personal injury  
when cleaning lamp, make sure you have turned off and  
unplugged the lamp, and allow sufficient time for the bulb  
to cool.  
8
 
Please visit our web site at:  
Call our Customer  
Service Department at  
1-888-544-4865  
(Representatives are available  
8 a.m. – 10 p.m. M – S  
9 a.m. – 8 p.m. Sunday Eastern)  
340 Mad River Park  
Waitsfield, VT 05673  
Printed in China for: Verilux, Inc.  
© Copyright 2008 Verilux, Inc. All rights reserved.  
VT01-MAN-Rev3  
 

Toastmaster Coffeemaker TCM10PWF User Manual
Toshiba Computer Drive HDD2E64 User Manual
Toshiba CRT Television 27A50 User Manual
Toshiba VCR RD XV48KE User Manual
Tote Vision Computer Monitor LCD 5200HD User Manual
True Manufacturing Company Freezer TMW 36F User Manual
Ultra Products Tool Storage ULT31436 User Manual
Ultra Start Remote Starter 3295 User Manual
Wagan Air Compressor 2262 User Manual
Weed Eater Blower 530163993 User Manual