ViewSonic Digital Photo Frame VFD823 User Manual

®
- User Guide  
ViewSonic  
- Guide de l’utilisateur  
- Guía del usuario  
VFD823  
Digital Photo Frame  
IMPORTANT: Please read this User Guide to obtain  
important information on installing and using your  
product in a safe manner, as well as registering your  
product for future service. Warranty information  
contained in this User Guide will describe your limited  
coverage from ViewSonic Corporation, which is also  
English, or in specific languages using the Regional  
selection box in the upper right corner of our website.  
“Antes de operar su equipo lea cuidadosamente las  
instrucciones en este manual”  
Model No. : VS13787  
 
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the  
European Parliament and the Council on restriction of the use of certain hazardous substances in  
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum  
concentration values issued by the European Technical Adaptation Committee (TAC) as shown  
below:  
Proposed Maximum  
Substance  
Actual Concentration  
Concentration  
Lead (Pb)  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
0.1%  
0.01%  
0.1%  
6+  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
0.1%  
Polybrominated diphenyl ethers (PBDE)  
0.1%  
Certain components of products as stated above are exempted under the Annex of the RoHS  
Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic  
ceramic parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more  
lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing  
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.  
ViewSonic  
ii  
VFD823  
 
Copyright Information  
Copyright © ViewSonic® Corporation, 2011. All rights reserved.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks  
of ViewSonic Corporation.  
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from  
furnishing this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to  
change product specifications without notice. Information in this document may change without  
notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
For Your Records  
Product Name:  
VFD823  
ViewSonic Digital Photo Frame  
VS13787  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
VFD823_UG_ENG Rev. 1c 02-23-11  
__________________________________  
__________________________________  
Product disposal at end of product life  
ViewSonic respects the environment and is committed to working and living green. Thank you  
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.  
ViewSonic  
iii  
VFD823  
 
Important Safety Information  
Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce  
the risk of fire, electric shock, and injury.  
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.  
Warning: To prevent the risk, do not remove the cover, there are no spare parts inside, refer all product  
services to professional personnel.  
Digital Photo frame is for indoor use only.  
Unplug Digital Photo frame before performing care and maintenance.  
Do not block the ventilation holes on the back of Digital Photo Frame at any time.  
Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source.  
Protect the power cord. Route power cords appropriately to avoid trip over by someone else or  
pinched by items placed on or against it. Pay particular attention to the point where the cord  
attaches to Digital Photo Frame.  
Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter  
will void your warranty.  
Unplug the power cord from the outlet when the unit is not in use.  
Cleaning LCD Screen  
Touch the screen gently. The screen is made of glass which can be scratched or damaged.  
To clean fingerprints or dust from the LCD screen, we recommend using a soft / nonabrasive cloth  
such as a camera lens cloth to clean the LCD screen.  
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen.  
Clean the LCD screen with a cleaning cloth moistened with the liquid.  
Package Content  
Digital Photo Frame  
AC power adapter (5V, 1A)  
User Guide  
Quick Start Guide  
Stand  
ViewSonic  
iv  
VFD823  
 
Table of Contents  
1.Precautions...............................................................2  
2.Product Information ..................................................3  
2.1 Features .............................................................3  
2.2 Specifications......................................................3  
2.3 Accessories.........................................................3  
2.4 Navigation Buttons..............................................4  
2.5 Input Connections .............................................5  
3.Getting Started..........................................................6  
3.1 Stand...................................................................6  
4.Operating Instructions...............................................7  
4.1 Turn on/off the Digital Photo Frame ....................7  
4.2 OSD Navigation ..................................................7  
4.3 Viewing Photos ...................................................8  
4.4 View Calendar.....................................................9  
4.5 Settings .............................................................10  
5.Troubleshooting.......................................................11  
ViewSonic  
1
VFD823  
 
1.Precautions  
Warnings  
Please read this manual carefully before operating and save it for future  
reference.  
Avoid exposing this device to water,  
moisture or high temperature. Do not  
place it near swimming pool, bathtub or  
sink where it may come in contact with  
water.  
Clean only with a dry soft cloth; do not use  
any chemical liquid for cleaning.  
To ensure reliable operation of the  
Only use accessories specified by the  
device and to protect it from overheating,  
do not block any ventilation openings.  
manufacturer.  
Do not step on the power cable, plug or  
adapter to avoid electrical shock.  
Do not attempt to service this device  
yourself. Opening or removing covers  
may expose you to electrical shock or  
other hazards. Refer all services to a  
qualified service personnel.  
Please unplug this device during the  
thunderstorm or not in use for a long  
period.  
Do not apply force on the LCD screen  
during transport or usage. Avoid sharp  
objects.  
ViewSonic  
2
VFD823  
 
2.Product Information  
2.1 Features  
High quality 8 inch LCD: 800x600 high resolution.  
Slim and fashionable design, suitable for gifts and home decoration.  
High-speed picture decoding technology in JPG format with rotation and  
zooming supported.  
■Slideshow with multiple transition effects.  
Calendar and Clock functions.  
User-friendly navigation buttons.  
■Three-in-one (SD/SDHC/MMC) and USB flash drive supported.  
2.2 Specifications  
Panel size / Aspect  
8-inch 4:3  
ratio  
Effective viewing  
LCD Screen  
162.0(W)x121.5(H) mm (6.4”W x 4.8”H)  
area  
Resolution  
800(W)x600(H) pixels  
Image formats  
supported  
JPG, JPEG (baseline coding)  
Photo File  
Calendar  
Max. image  
resolution  
30 million pixels  
Clock, Calendar  
Memory Card  
supported  
MMC, SD, SDHC (max. 16GB)  
Memory Medium  
USB  
USB flash drive  
FAT, FAT32  
File system  
Power input  
5VDC, 1.0A  
Power  
5W  
consumption  
Electrical  
AC 100-240V,  
Specifications  
Input  
50/60Hz  
Power adapter  
Output  
DC5V, 1.0A  
Dimensions  
Weight  
217x176x24 mm (8.5”W x 6.9”H x 0.9”D)  
Approx. 415g (0.9 lbs)  
Dimensions  
Operating mode  
Buttons on the panel  
Operating  
0°C~40°C (32°F~104°F)  
-20°C~60°C (-4°F~140°F)  
temperature  
Environmental  
Requirements  
Storage  
temperature  
ViewSonic  
3
VFD823  
 
2.3 Accessories  
Digital Photo Frame ---------------------- 1 piece  
Power adapter ----------------------------- 1 piece  
User’s manual ----------------------------- 1 piece  
Quick start guide ------------------------- 1 piece  
Stand ---------------------------------------- 1 piece  
2.4 Navigation Buttons  
Power: a. Press briefly to turn on the device when the power is off;  
b. Press & hold to turn off the device when the power is on;  
c. Press briefly to turn to the Main Menu when the power is on.  
DOWN: Down.  
UP: Up.  
PLAY: a. Confirm/Enter; b. Press & hold for 3s to pop up the  
shortcut menu; c. Play/ pause.  
LEFT: a. Left; b. Backward.  
RIGHT: a. Right; b. Forward.  
RETURN: Exit.  
ViewSonic  
4
VFD823  
 
2.5 Input Connections  
USB : connect to USB flash drive.  
SD/SDHC/MMC card slot.  
DC-IN: power input 5V DC 1.0A  
ViewSonic  
5
VFD823  
 
3.Getting Started  
3.1 Stand  
Attaching the stand: screw in the stand clockwise until it is secure.  
Removing the stand: unscrew the stand counter-clockwise until it is detached.  
ViewSonic  
6
VFD823  
 
4.Operating Instructions  
4.1 Turn on/off the Digital Photo Frame  
Power on  
Press briefly [  
Power off  
] on the device, the device will be turned on.  
] on the device, the device will be turned off.  
Press & hold [  
4.2 OSD Navigation  
Main Menu  
The Main Menu is shown below. Press the Left and Right buttons  
to select an icon, and press Enter [  
].  
Return to the Main Menu  
Press briefly [  
], the device will return to the Main Menu.  
ViewSonic  
7
VFD823  
 
4.3 Viewing Photos  
Slideshow  
Insert an SD/SDHC/MMC or USB memory source device into an appropriate  
memory slot, the photo frame will start slideshow automatically.  
To exit slideshow, press the RETURN button.  
To start slideshow at a particular photo, press either the LEFT or RIGHT  
button and then press PLAY.  
Slideshow setup  
Step 1: Press & hold [  
] for the slideshow sub-menu.  
] to select an option.  
] to confirm and press [  
Step 2: Press [  
Step 3: Press [  
] to exit the sub-menu.  
Status  
Zoom  
Rotate 1  
Rotate 2  
Display Ratio  
Copy to  
Delete  
Return  
Status: Pause and Play.  
Zoom: zoom in an image.  
Rotate 1: rotate an image clockwise.  
Rotate 2: rotate an image counter-clockwise.  
Display Ratio: select from Auto, Original, Crop and Stretch.  
Copy to: Copy photos to internal photo frame memory. It is recommended  
that each image is no larger than 50KB.  
Delete: delete the selected photo.  
Return: exit.  
ViewSonic  
8
VFD823  
 
4.4 View Calendar  
Step 1: Use [  
] to select “Calendar” icon on the Main Menu.  
] to display a calendar.  
Step 2: Press [  
Step 3: Use the UP button to view the previous month and use the DOWN  
button to view next month.  
4.5 Settings  
Step 1: Use [  
] to select "Setting" icon on the Main Menu.  
Step 2: Press [  
] to enter the Setup Menu. The Photo Setup, Calendar  
Setup and System Setup setting is shown below.  
Photo Setup: Select “Photo Setup” and press ENTER.  
Display Ratio: Use [  
Screen.  
] to select from Crop to Fill, Full Screen and Fit to  
Slideshow time: Use [  
and 15min.  
] to select from 5sec, 15sec, 30sec, 60sec, 5min  
] to select from 11 transition effects; mosaic,  
Transition effect: Use [  
cross, rectangle, spiral, none, random, block, split, reveal, blind, tiny lines.  
Mode: Use [◄ ►] to switch among Random, Order.  
Calendar Setup: Select “Calendar Setup” and press ENTER.  
Set Date: Press [  
] to go backward and forward among the options, and  
[
] to change the value.  
Clock Mode: Use [  
] to select between 12Hr and 24Hr.  
Set Time: Use [  
] to select an option, and [  
] to change the value.  
ViewSonic  
9
VFD823  
 
System Setup: Select “System Setup” and press ENTER.  
Language: Use [  
Backlight: Use [  
Power On: Use [  
] to select the on-screen language.  
] to adjust the brightness level.  
] to enable auto power on.  
Auto Boot Time: Set the timer for the photo frame to turn on automatically.  
Use [ ] to select an option, and [ ] to change the value.  
Power Off: Use [ ] to enable auto power off.  
Auto Off Time: Set the timer for the photo frame to turn off automatically.  
Use [  
] to select an option, and [  
] to change the value.  
Auto-Power Frequency: Use [  
] to set how often you want the photo  
frame to use the auto power on feature.  
USB Options: Udisk (for VFD823 only).  
Default: Press ENTER to restore to factory settings. Select “Yes” (dark blue)  
and press ENTER again to confirm.  
Version: Press ENTER to display the current firmware version.  
System Upgrade: For firmware upgrade.  
ViewSonic  
10  
VFD823  
 
5.Troubleshooting  
Problem & Solution  
Check whether the AC power adapter rating is correct, and  
it is securely plugged to an electrical outlet.  
Can not power on, and  
nothing happens even if  
connected to an outlet  
Check whether the screen brightness is set to a low level in  
the Setup menu.  
The screen is off  
Screen freeze and does  
not respond to control  
anymore  
Unplug&replug the photo frame.  
The image file is not supported by this device. Only  
800x600 or lower resolution images in JPG format  
(baseline coding) are supported.  
Some images are not  
displayed  
Cannot read USB Flash  
Drive  
Check whether a USB flash drive is inserted properly. The  
Max. Capacity of USB flash drive is 16G.  
Check whether SD/SDHC card is inserted properly. The  
notch should be facing down. Do not force the memory  
card in.The Max. Capacity of SD/SDHC card is 16GB.  
Cannot read SD/SDHC  
card  
No files are displayed on  
File allocation table is damaged. Reboot the device.  
the screen  
Restart playing. (Note: This device has a self protection  
function against sudden system abnormality.)  
Exit playing and went  
back to the Main Menu  
automatically  
ViewSonic  
11  
VFD823  
 
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
Note : You will need the product serial number.  
Country/  
Region  
T=Telephone  
F=Fax  
Web Site  
E-mail  
Australia/New  
Zealand  
AUS=1800 880 818  
NZ=0800 008 822  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 11 9999  
Ireland (Eire)  
Korea  
uk/  
uk/support/call-desk/  
T= 080 333 2131  
Latin America  
(Argentina)  
T= 0800-4441185  
T=1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Latin America  
(Chile)  
Latin America  
(Columbia)  
Latin America  
(Mexico)  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16  
Latin America  
(Peru)  
T= 0800-54565  
Macau  
ap.viewsonic.com/me/  
T= 853 2870 0303  
Middle East  
Contact your reseller  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico &  
Virgin Islands  
Singapore/  
Malaysia/  
Thailand  
T= 65 6461 6044  
South Africa  
ap.viewsonic.com/za/  
Contact your reseller  
United  
Kingdom  
service_gb@viewsoniceurope.  
com  
uk/  
uk/support/call-desk/  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
ViewSonic  
12  
VFD823  
 
Limited Warranty  
VIEWSONIC Digital Photo Frame  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer  
purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Causes external to the product, such as electric power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static  
image is displayed on the product for an extended period of time.  
4. Removal, installation, one way transportation, insurance, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please  
refer to Customer Support page). You will need to provide your product’s serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service  
center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein  
including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be  
liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility of  
such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
4.3: ViewSonic DPF Warranty  
DPF_LW01 Rev. 1A 06-20-08  
ViewSonic  
13  
VFD823  
 
Mexico Limited Warranty  
VIEWSONIC Digital Photo Frame  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer  
purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1.  
2.  
Any product on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Causes external to the product, such as electric power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3.  
Any product exhibiting a condition commonly known as “image burn-in” which results when a static  
image is displayed on the product for an extended period of time.  
How to get service:  
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer  
to the attached Customer Support page). You will need to provide your product’s serial number, so please  
record the product information in the space provided below on your purchase for your future use. Please  
retain your receipt of proof of purchase to support your warranty claim.  
For Your Records  
Product Name: ______________________ Model Number: _______________________  
Document Number: ____________________  
Serial Number: ______________________ Purchase Date: ________________________  
Extended Warranty Purchase? _______________(Y/N)  
If so, what date does warranty expire? _____________________________________________  
1.  
2.  
3.  
To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
Take or ship the product in the original container packaging to an authorized ViewSonic service  
center.  
Round trip transportation costs for in-warranty products will be paid by ViewSonic.  
ViewSonic  
14  
VFD823  
 
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein  
including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be  
liable for:  
1.  
Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility of  
such damages.  
2.  
3.  
4.  
Any other damages, whether incidental, consequential or otherwise.  
Any claim against the customer by any other party.  
Repair or attempted repair by anyone not authorized by ViewSonic.  
ViewSonic  
15  
VFD823  
 
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:  
Name, address, of manufacturer and importers:  
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,  
Col. San Fernando Huixquilucan, Estado de México  
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004  
Hermosillo:  
Villahermosa:  
Distribuciones y Servicios Computacionales SA de Compumantenimietnos Garantizados, S.A. de C.V.  
CV.  
AV. GREGORIO MENDEZ #1504  
Calle Juarez 284 local 2  
COL, FLORIDA C.P. 86040  
Col. Bugambilias C.P: 83140  
Tel: 01-66-22-14-9005  
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09  
Puebla, Pue. (Matriz):  
Veracruz, Ver.:  
RENTA Y DATOS, S.A. DE C.V. Domicilio:  
29 SUR 721 COL. LA PAZ  
72160 PUEBLA, PUE.  
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419  
ENTRE PINZÓN Y ALVARADO  
Fracc. Reforma C.P. 91919  
Tel: 01(52).222.891.55.77 CON 10 LINEAS  
Chihuahua  
Tel: 01-22-91-00-31-67  
Cuernavaca  
Soluciones Globales en Computación  
C. Magisterio # 3321 Col. Magisterial  
Chihuahua, Chih.  
Tel: 4136954  
Distrito Federal:  
Compusupport de Cuernavaca SA de CV  
Francisco Leyva # 178 Col. Miguel Hidalgo  
C.P. 62040, Cuernavaca Morelos  
Tel: 01 777 3180579 / 01 777 3124014  
Guadalajara, Jal.:  
QPLUS, S.A. de C.V.  
Av. Coyoacán 931  
SERVICRECE, S.A. de C.V.  
Av. Niños Héroes # 2281  
Col. Del Valle 03100, México, D.F.  
Tel: 01(52)55-50-00-27-35  
E-Mail : [email protected]  
Col. Arcos Sur, Sector Juárez  
44170, Guadalajara, Jalisco  
Tel: 01(52)33-36-15-15-43  
Monterrey:  
Guerrero Acapulco  
GS Computación (Grupo Sesicomp)  
Progreso #6-A, Colo Centro  
39300 Acapulco, Guerrero  
Tel: 744-48-32627  
Global Product Services  
Mar Caribe # 1987, Esquina con Golfo Pérsico  
Fracc. Bernardo Reyes, CP 64280  
Monterrey N.L. México  
Tel: 8129-5103  
Oaxaca, Oax.:  
MERIDA:  
ELECTROSER  
CENTRO DE DISTRIBUCION Y  
SERVICIO, S.A. de C.V.  
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca  
Tel: 01(52)95-15-15-22-22  
Av Reforma No. 403Gx39 y 41  
Mérida, Yucatán, México CP97000  
Tel: (52) 999-925-1916  
Fax: 01(52)95-15-13-67-00  
FOR USA SUPPORT:  
Tijuana:  
STD  
ViewSonic Corporation  
Av Ferrocarril Sonora #3780 L-C  
Col 20 de Noviembre  
Tijuana, Mexico  
381 Brea Canyon Road, Walnut, CA. 91789 USA  
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);  
Fax: 1-800-685-7276  
4.3: ViewSonic Mexico Limited Warranty  
DPF_LW03 Rev. 1A 06-25-07  
ViewSonic  
16  
VFD823  
 
 

Texas Instruments Power Supply ADS5102 EVM User Manual
Toshiba Computer Drive 3006GAL User Manual
Toshiba DVD Player SD 330ESB User Manual
Toshiba DVD Player SD5300 User Manual
Toshiba Flat Panel Television 27HL85 User Manual
TRENDnet Network Router 54Mpbs 80211g Wireless Access Point + Bridge User Manual
Tripp Lite Computer Hardware B132 004 RB User Manual
Tunturi Treadmill T60F User Manual
Uniden Cordless Telephone DCT5280 User Manual
Viking Range F20495 User Manual