REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Standard Features & Accessories
All models include
• Total capacity—20.3 cu. ft. (574.5 L)
precision ball-bearing glides
positive self-closing feature
Capacity—5.1 cu. ft. (44.3 L)
Adaptive defrost
Factory-installed automatic ice
maker
o
o
o
o
o
84”H./24”D.
Seperate temperature control can
be set for produce or fresh meat
storage
• ProChill™ Temperature Management
System
o
•
Variable speed single compressor
Quick-chill option chills foods and
o
system includes the quietest, most
technologically advanced
compressor available
beverages in minutes
Two slide-out wire baskets
o
Two moisture adjustable see-
through produce drawers with pre-
cision ball-bearing glides
• Open door alarm sounds and glows to
warn that door has been ajar for three
minutes
o
Electronic controls maintain the
o
o
temperature selection within 1ºF
Multi-channel airflow system
removes odors and excess humidity
• Frost-free refrigerator
Two in-the-door dairy compartments
with covers
Five adjustable aluminum door bins
with tempered glass fronts
• Adjustable door stops standard—90°,
110°, or 120° swing
• Sabbath Mode
• Must be ordered right or left hinge.
(As you face unit, RIGHT has hinge on
right side and handle on left side;
LEFT has hinge on left side and han-
dle on right side.)
o
o
Capacity—15.2 cu. ft. (430.2 L)
Five adjustable tempered glass spill-
proof shelves
Convertible temperature-controlled
o
o
Top shelf provides quick chill-down
o
area
Egg bin and butter tray
o
• Frost-free freezer
o
Meat Savor™/produce drawer with
Full-extension freezer drawer with
Model Options
VCBB363/VIBB363
Professional/Professional
Integrated
DDBB363
Designer
DFBB363
Custom Front
FINISH DETAILS FOR DFBB MODEL
• Handles not included—opt for custom
handles, or purchase a Viking
Professional Series or Designer Series
handle kit (see Installation Notes &
Accessories).
• See Custom Panels section for
more information and additional
specifications.
FINISH DETAILS FOR VCBB/VIBB MODELS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),
Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).
FINISH DETAILS FOR DDBB MODEL
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),
Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).
• Finish codes designate door fronts.
Stainless steel upper grille, side trim,
and handles (with chrome-plated
brackets); black lower kickplate.
• Brass Trim Option (BR)—nameplate,
handle/brackets, and side trim. Brass
components have a durable protective
coating for maintenance-free normal
use.
• Finish codes designate door fronts.
Stainless steel upper grille, side trim,
and handles, with black lower
kickplate.
• Brass Trim Option (BR)—handle. Brass
components maintenance-free normal
use.
ORDERING INSTRUCTIONS
First specify model number, followed by hinge preference (“R” for right or “L” for left), and then color code (VCBB363RSS).
If ordering optional brass trim, specify code at end (VCBB363RSSBR).
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Please see
Dimensions & Specifications
✪
Installation Notes &
PRODUCT DIMENSIONS
Accessories
for important
information,
including panel,
grille, and handle
kits.
ALL MODELS
DDBB363
Designer
DFBB363
Custom Front
Star-K Kosher
Certification for
use on the Jewish
Sabbath or Jewish
holidays
See Custom Panels section for
more information and additional
specifications.
35”
3-1/2
35”
(88.9 cm)
3-1/2
(88.9 cm)
(8.9 cm)
”
(8.9 cm)
”
36”
(91.4 cm)
36”
(91.4 cm)
51-1/2”
51-1/2”
(130.8 cm)
(130.8 cm)
79-17/32”
(202 cm)
79-17/32”
(202 cm)
82-7/8”
82-7/8”
(210.5 cm)
(210.5 cm)
min.
min.
to
84-1/16”
to
84-1/1
(213.5 cm)
(213.5 cm)
6”
max.
23-1/16”
(58.5 c
max.
23-1/16”
(58.5 c
m)
m)
8”
16”
23-3/
23-13/
(59.4 cm)
(60.5 cm)
24”
cm)
cm)
24-3/4”
(61.0
(62.9
26”
DESIGNER
CUSTOM FRONT
cm)
ies
ar
V
(66.0
DDBB363
DFBB363
Overall width
36” (91.4 cm)
Overall height (from bottom)
Overall depth (from rear)
To front edge of side trim
To front of top grille
To front of handle
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
23-3/8” (59.4 cm)
24” (61.0 cm)
23-13/16” (60.5 cm)
24-3/4” (62.9 cm)
Varies
26” (66.0 cm)
Approx. ship weight
565 lbs. (254.3 kg)
500 lbs. (227.3 kg)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Dimensions & Specifications
DOOR SWING
• Adjustable door stops standard—90°, 110°, or 120° swing
VCBB363/VIBB363
Professional/Professional
Integrated
DDBB363
Designer
DFBB363
Custom Front
See Custom Panels section for
more information and additional
specifications.
36”
(91.4 cm)
35”
(88.9 cm)
18-29/32”
(48.0 cm)
14”
(35.6 cm)
3-1/32”
(7.7 cm)
24-11/16”
(62.7 cm)
58-11/32”
(148.2 cm)
56-5/8”
(143.8 cm)
54-7/32”
(137.7 cm)
0
90.0
0
110.0
0
120.0
2-1/2”
(6.4 cm)
PROFESSIONAL
36”
(91.4 cm)
35”
(88.9 cm)
18-3/16”
(46.2 cm)
13-1/8”
24”
(61.0 cm)
(33.3 cm)
1-27/32”
(4.7 cm)
58-3/8”
(148.3 cm)
56-11/16”
(144.0 cm)
54-9/32”
(137.9 cm)
0
90.0
0
110.0
0
120.0
PROFESSIONAL INTEGRATED/
DESIGNER
2-1/16” (5.2 cm)
Designer
2-1/2” (6.4 cm)
Professional Integrated
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Dimensions & Specifications
CLEARANCE DIMENSIONS—PROFESSIONAL
TOP VIEW
Wall
1-13/16”
(4.6 cm)
space if 24” standard
cabinet depth is used
24”
(61.0 cm)
standard cabinet depth
3/4”
(1.9 cm)
full end panel
Countertop
overhang
Door
2-1/2”
(6.4 cm) offset
TOP VIEW
Wall
1-13/16”
24”
(61.0 cm)
standard
cabinet
depth
(4.6 cm)
space if 24” standard
cabinet depth is used
3/4”
(1.9 cm)
full end panel
5/16”
(0.8 cm)
Door
2-1/2”
(6.4 cm) offset
TOP VIEW
Wall
1-13/16”
(4.6 cm)
space if 24” standard
cabinet depth is used
24”
(61.0 cm)
standard cabinet depth
3/4”
(1.9 cm)
full end panel
Partial overlay
cabinet door
Door
2-1/2”
(6.4 cm) offset
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Dimensions & Specifications
CLEARANCE DIMENSIONS—PROFESSIONAL INTEGRATED/DESIGNER
TOP VIEW
Wall
1”
(2.5 cm)
if 25” (63.5 cm)
cabinet depth is used
25”
(63.5 cm)
countertop
depth
24”
(61.0 cm)
standard
cabinet depth
3/4”
(1.9 cm)
full end panel
Door
Flush
TOP VIEW
Wall
1”
(2.5 cm)
if 25” (63.5 cm)
cabinet depth is used
25”
3/4”
(63.5 cm)
(1.9 cm)
full end panel
Door
Flush
TOP VIEW
Overlapping cabinet doors
Wall
3/4”
(1.9 cm)
if 25” (63.5 cm)
cabinet depth is used
24-3/4”
(62.9 cm)
3/4”
(1.9 cm)
full end panel
24”
(61.0 cm)
d
standar
cabinet
depth
Cabinet
door
Door
Flush
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Installation Requirements
UTILITY
REQUIREMENTS
ACCESS REQUIREMENTS
GAS
Not applicable
VCBB363/VIBB363
Professional/Professional
Integrated
DDBB363
Designer
DFBB363
Custom Front
ELECTRICAL
• Three-wire cord
with grounded
three-prong plug
attached to
See Custom Panels section for
more information and additional
specifications.
product
24”*
(61.0 cm) min.
Anti-tip boar
• 115 VAC/60 Hz;
15 amp dedicated
circuit
d
6”
(15.2 cm)
9”
(22.9 cm)
• Maximum amp
usage—9.9
9”
(22.9 cm)
• Estimated
energy usage—
567 kWh/year
82-7/8”
(210.5 cm)
ELECTRIC OUTLET LOCATION
anti-tip
min.
boar
opening height
d &
84-1/16”
(213.5 cm) max.
anti
ope
ning h
-t
i
p boar
d
&
eight
73-3/8”
(186.4 cm)
PLUMBING
• Inlet waterline
requirements—
1/4” copper
tubing
• 20 psi min.;
120 psi max.
7-5/8”
(19
.4 cm)
6-3/4”
(17
5/8”
(1.5 cm)
.1 cm)
35-1/2
(90.2
c
3”
”
in
m) m
(7.6 cm)
35-3/4to
(90.
Pr
8
ofessional
”
.
c
m) m
Pr
o
Desigfneesr/
in.
3
(91.4 6”
cm)
5/8
3-5
/8”
2 cm)
sional
”
(9.
(1.5 cm)
Int
Custo
egrated/
m
1”
cm)
Fr
o
nt
(2.5
10
(27.3 cm)
3/4
10-1/2”
(26.7
cm)
-
”
5/8”
(1.5 cm)
Option
water lin
al floor
e entry
*Custom front models fit flush in 25”-deep (63.5 cm)
cabinet openings. They can be installed in standard
24”-deep openings. The door faces and top grille
will protrude 3/4” (1.9 cm) into the room.
WATER LINE ENTRY AREA
VCBB363
VIBB363
DDBB363
DFBB363
Cutout width
35-1/2” (90.2 cm) min. to
36” (91.4 cm)
36” (91.4 cm)
36” (91.4 cm)
35-3/4” (90.8 cm) max.
Cutout height
Cutout depth
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
24” (61.0 cm) min.*
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Installation Requirements
ACCESS REQUIREMENTS – Dual Installation
See anti-tip boar
24”*
(61.0 cm)
d installation
6”
(15.2 cm)
9”
9”
(22.9 cm)
(22.9 cm)
82-7/8”
(210.5 cm) min.
anti-tip boar
ELECTRIC OUTLET LOCATION
opening height
d &
73-3/8”
(186.4 cm)
84-1/16”
(213.5
cm) max.
anti-tip boar
opening height
d &
7-5/
8”
71-1/2”
(181.6 cm)
(19.4 cm)
Pr
2”
6-3/4”
o
fes
sio
nal
5/8”
(17.1
Pr
ofessional
(182.9
c
(1.5
m)
7
Designer/Custom
c
3
”
m)
cm)
Integrated/
(7.6 cm
)
5/8”
Fr
ont
3-5/8”
(9.2
cm
)
(1.5
c
m)
10-
27 3/4”
10-1/2
(26.7 cm)
(
.
3 cm
”
5
/8”
(1.5 cm)
)
36”W./36”W. REFRIGERATOR/
FREEZER BOTTOM MOUNT
COMBINATION
1”
)
Op
(2.5 cm
w
tiona
er line en
l flo
a
t
or
ry
t
WATER LINE ENTRY AREA
*Custom front models fit flush in 25”-deep (63.5 cm) cabinet openings. They can be installed in standard 24”-deep openings. The
door faces and top grille will protrude 3/4” (1.9 cm) into the room.
VCBB363/VCBB363
VIBB363/VIBB363
DDBB363/DDBB363
DFBB363/DFBB363
Cutout width
Cutout height
Cutout depth
71-1/2” (181.6 cm)
72” (182.9 cm)
72” (182.9 cm)
72” (182.9 cm)
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
24” (61.0 cm) min.*
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 36”W. Bottom-Mount
Refrigerator/Freezer
Installation Notes & Accessories
✪
Side Panel Kits
• Stainless Steel (SS)
• Panels provide finished, freestanding look; unit must still be secured to the wall
• Kit includes one panel and installation hardware
Model
PSSPL3
PSSPR3
DSSPL3
DSSPR3
Description
Approx. ship wt. lbs. (kg)
Professional side panel left (VCBB)
Professional side panel right (VCBB)
Designer side panel left (VIBB/DDBB/DFBB)
Designer side panel right (VIBB/DDBB/DFBB)
45 (20.2)
45 (20.2)
45 (20.2)
45 (20.2)
Side Panel Hardware Kit
• For use with Designer built-in refrigerator/freezers
• Hardware allows installation of custom side panels
• Kit includes brackets, screws, and installation instructions to mount panels on left and right side
Model
Description
Approx. ship wt. lbs. (kg)
SPHKDS
Side panel hardware kit
3 (1.4)
Top Panel Kit
• Stainless Steel (SS)
• Panel provides finished, freestanding look; unit must still be secured to the wall
• Kit includes one panel and installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
TOP-36
36”W. top panel
22 (10.0)
Top Grille Kits
• Stainless Steel (SS)
• For use with installation of two 36”W. bottom-mount refrigerator/freezers
• Grille creates a single unit look
• Kit includes one full-length grille, center cabinet trim connector, and grill installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
PBRTGK72-SS
Professional 72”W. grille (for two VCBB units)
25 (11.3)
DBRTGK72-SS
Designer 72”W. grille (for two DDBB/DFBB units)
25 (11.3)
Handle Kits
• For use with custom front refrigerator/freezers
• For use on locally supplied custom front panels
• Handles allow refrigerator/freezers with custom front panel to coordinate with other Professional and Designer products
• Kit includes two handles and installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
PHK-DFBB-SS
PHK-DFBB-BR
HKFDS-SS
HKFDS-BR
Professional handles (Stainless Steel)
Professional handles (Brass)
Designer handles (Stainless Steel)
Designer handles (Brass)
10 (4.5)
10 (4.5)
10 (4.5)
10 (4.5)
Compliance Information
WARRANTY SUMMARY*
• Two-year full warranty—complete unit
• Six-year full warranty—sealed refrigeration system and automatic ice maker
• Twelve-year limited warranty—sealed refrigeration system (includes compressor, condenser,
dryer/strainer, evaporator, and connecting tubing)
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
* For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
|