Viking Ventilation Hood DCWH User Manual

VENTILATION  
Built-In Classic Chimney Wall Hood—  
Standard, w/Ledge, & Ledgeless  
Standard Features & Accessories  
All models include  
• Adjustable duct cover (for 8 – 9’  
o Virtually seamless stainless steel  
design with no visible screws  
• Easy cleanup  
Model numbers  
ceilings) is standard  
CLASSIC CHIMNEY WALL HOODS  
• DCWH3042—30”W./12”H.  
• DCWH3644—36”W./14”H.  
• DCWH4244—42”W./14”H.  
• DCWH4844—48”W./14”H.  
CLASSIC CHIMNEY WALL HOODS WITH  
LEDGE  
• Must also purchase interior or exterior  
ventilator kit, sold separately (see  
Installation Notes & Accessories for  
recommended Viking ventilator  
products)  
• Heat sensor turns the ventilator on full  
power when cooking temperatures  
reach uncomfortable levels  
• Variable speed controls for custom  
venting—separate on/off switch allows  
you to leave ventilator at favorite/most-  
used setting  
• 12-hour timer built into ventilator  
controls  
o Dishwasher-safe, stainless steel mesh  
filters efficiently remove grease and  
heated vapors from the air, and are  
easily removed for quick cleaning  
(frame and mesh are stainless steel)  
See Dimensions & Specifications  
table for number of filters per model  
o Design of low-profile filter system  
means less interior hood space to be  
cleaned  
o Canopy interior is completely lined in  
stainless steel for increased rigidity,  
seamless appearance, and easy cleaning  
• 50-watt halogen lights with dimmer  
control  
• DCWL3342—33”W./12”H.  
• DCWL3944—39”W./14”H.  
• DCWL4544—45”W./14”H.  
• DCWL5144—51”W./14”H.  
CLASSIC CHIMNEY WALL HOODS,  
LEDGELESS  
• DCWN3042—30"W./12"H.  
• DCWN3644—36"W./14"H.  
• DCWN4244—42"W./14"H.  
DCWN4844—48"W./14"H.  
• Delay feature allows you to set the  
ventilator to shut off on its own from  
10 to 30 minutes later  
• 24”D. (tests show 24”D. hoods perform  
properly over 27”D. ranges)  
• Power switch and dimmer control are  
separate, allowing you to leave dimmer  
at favorite position  
• Heavy-duty construction; sleek,  
contemporary design and styling  
o See Dimensions & Specifications  
table for number of lights per model  
Model Options  
DCWH Designer  
Chimney Wall Hood  
DCWL Designer  
Chimney Wall Hood  
w/Ledge  
DCWN Designer  
Chimney Ledgeless  
Wall Hood  
FINISH DETAILS  
• Stainless Steel (SS), Black (BK), White  
(WH), Metallic Silver (MS), Graphite Gray  
(GG), Stone Gray (SG), Taupe (TP), Biscuit  
(BT), Cotton White (CW), Oyster Gray  
(OG), Golden Mist (GM), Lemonade (LE),  
Sage (SA), Mint Julep (MJ), Sea Glass (SE),  
Iridescent Blue (IB), Viking Blue (VB),  
Pumpkin (PM), Racing Red (RR), Apple  
Red (AR), Burgundy (BU), Plum (PL),  
Chocolate (CH), and Cobalt Blue (CB).  
• Accessory Rail Option*—Front of hood.  
(Must be ordered factory installed. Rail not  
available on ledge & ledgeless models.)  
o Stainless Steel/Chrome (CR)—Stainless  
steel rail with chrome supports/brackets  
and hooks (included).  
o Brass Rail Option (BR)—nameplate, rail,  
supports/brackets, and hooks  
(included). Brass components have a  
durable protective coating for  
maintenance-free normal use.  
ORDERING INSTRUCTIONS  
First specify model number, followed by color code (DCWH3042SS). If ordering optional decorative rail, specify code at end  
(DCWH3042SSCR).  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In Classic Chimney Wall Hood—  
w/Ledge, & Ledgeless  
Please see  
Dimensions & Specifications  
Installation Notes &  
Accessories for  
important information,  
including ventilator  
kits, duct covers,  
backsplashes, and  
warming shelf  
PRODUCT DIMENSIONS  
panels.  
DCWL Designer  
Chimney Wall Hood  
w/Ledge  
DCWN Designer  
Chimney Ledgeless  
Wall Hood  
12”  
12”  
C
C
(30.5 cm)  
(30.5 cm)  
D
B
D
B
2 ”  
(5.1 cm)  
A
A
24”  
cm)  
0
.
(61  
m)  
c
CHIMNEY WALL  
HOOD LEDGE  
CHIMNEY WALL  
HOOD LEDGELESS  
25-1/2”  
.8  
(64  
Model  
Hood  
Width (A)  
Duct Cover  
Depth  
Lights  
Filters  
Heat  
Lamps  
Approx.  
Ship. wt.  
Height (B)  
Width (C)  
Height (D)  
DCWL3342 32-7/8” (83.5 cm)  
DCWL3944 38-7/8” (98.4 cm)  
DCWL4544 44-7/8” (114.0 cm)  
DCWL5144 50-7/8” (129.2 cm)  
DCWN3042 29-7/8” (75.9 cm)  
DCWN3644 35-7/8” (91.1 cm)  
DCWN4244 41-7/8” (106.4 cm)  
DCWN4844 47-7/8” (121.6 cm)  
12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)—  
30” (76.2 cm)  
2
2
2
3
2
2
2
3
2
2
3
3
2
2
3
3
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
54 lbs.  
(24.5 kg)  
64 lbs.  
14” (35.5 cm)  
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(29.0 kg)  
74 lbs.  
14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(33.6 kg)  
85 lbs.  
14” (35.5 cm) 18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(38.6 kg)  
51 lbs.  
12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)—  
30” (76.2 cm)  
(23.1 kg)  
61 lbs.  
14” (35.5 cm)  
14” (35.5 cm)  
14” (35.5 cm)  
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(27.7 kg)  
71 lbs.  
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(32.2 kg)  
82 lbs.  
18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)—  
28” (71.1 cm)  
(37.2 kg)  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In Classic Chimney Wall Hood—  
Standard, w/Ledge, & Ledgeless  
Dimensions & Specifications  
CLEARANCE DIMENSIONS  
66”min.  
(167.6 cm)  
30”min.  
to  
72”max.  
(76.2 cm)  
(182.9 cm)  
to  
36”max.  
(91.4 cm)  
36”  
(91.4 cm)  
CHIMNEY WALL HOOD  
66”min.  
(167.6 cm)  
30”min.  
to  
72”max.  
(76.2 cm)  
(182.9 cm)  
to  
36”max.  
(91.4 cm)  
36”  
cm)  
(91.4  
CHIMNEY WALL HOOD  
LEDGE/LEDGELESS  
Note: For best performance and safe, efficient operation,  
it is recommended that the bottom of the hood be 30”  
(76.2 cm) to 33” (83.8 cm) above the countertop.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In Classic Chimney Wall Hood—  
Standard, w/Ledge, & Ledgeless  
Installation Requirements  
DCWH Designer  
Chimney Wall Hood  
DCWL Designer  
Chimney Wall Hood  
w/Ledge  
DCWN Designer  
Chimney Ledgeless  
Wall Hood  
UTILITY REQUIREMENTS  
Proper installation/ducting is extremely  
important to ensure maximum  
performance. Use a qualified and  
trained installer.  
o Straight runs and gradual  
turns are best; for example,  
each 90” elbow is equivalent  
to 5’ – 10’ (1.52 – 3.05 cm) of  
straight run.  
• 7’ round duct for 300 – 600  
CFM; 10’ for 900 – 1500 CFM  
o Never use flexible duct; it  
creates back pressure/air  
turbulence and greatly  
ELECTRICAL  
• Hardwire direct with two-wire  
with ground  
• 120 VAC/60 Hz  
• Max. amp usage (rating  
includes rec. ventilator kit  
rating)  
VENTILATION  
• Check with a qualified and  
trained installer or local codes  
for makeup air requirements, if  
any.  
PLUMBING  
Not applicable  
• Max. duct run  
reduces performance.  
o For 300 – 1,200 CFM—50’  
(15.2 m)  
GAS  
o For 1,500 CFM—75’ (22.9 m)  
o Duct run length is for general  
reference only; always use a  
qualified and trained installer.  
Not applicable  
Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly  
overstated.  
Model  
Ventilator kits  
Duct size  
Max. amps  
Interior  
Interior  
Exterior  
Interior  
Exterior  
Exterior  
6.6/3.9  
6.6/3.9  
6.6/3.  
DCWH3042  
DCWH3644  
DCWH4244  
DCWH4844  
DCWL3342  
DCWL3944  
DCWL4544  
DCWL5144  
DCWN3042  
DCWN3644  
DCWN4244  
DCWN4844  
DIV300/DIV440  
DIV300/DIV600*  
DIV600  
DEV900/DEV1200  
DEV900/DEV1200*  
DEV900/DEV1200*  
DEV1200/DEV1500**  
DEV900/DEV1200  
DEV900/DEV1200*  
DEV900/DEV1200*  
DEV1200/DEV1500**  
DEV900/DEV1200  
DEV900/DEV1200*  
DEV900/DEV1200*  
DEV1200/DEV1500**  
7” (17.8 cm)  
7” (17.8 cm)  
7” (17.8 cm)  
10” (25.4 cm)  
7” (17.8 cm)  
7” (17.8 cm)  
7” (17.8 cm)  
10” (25.4 cm)  
7” (17.8 cm)  
7” (17.8 cm)  
7” (17.8 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
1.7/3.2  
1.7/3.9  
3.9  
DIV1200*  
7.3  
4.3/5.1  
6.6/3.9  
6.6/3.9  
6.6/3.9  
4.3/5.1  
6.6/3.9  
6.6/3.9  
6.6/3.9  
4.3/5.1  
DIV300/DIV440  
DIV300/DIV600*  
DIV600  
1.7/3.2  
1.7/3.9  
3.9  
DIV1200  
7.3  
DIV300/DIV440  
DIV300/DIV600*  
DIV600  
1.7/3.2  
1.7/3.9  
3.9  
DIV1200*  
7.3  
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.  
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs.  
Note: Maximum amp rating for hoods includes recommended ventilator kit rating. All products must be hard wired with two-wire ground. An interior- or  
exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In Classic Chimney Wall Hood—  
Standard, w/Ledge, & Ledgeless  
Installation Notes & Accessories  
Recommended Ventilator Kits  
• See Installation Requirements table for recommendations for each hood model  
• One ventilator, one duct run for any size hood/ventilator  
• A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill  
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty  
Kit model  
Description  
Hood models  
Approx. ship wt. lbs. (kg)  
DIV300  
300 CFM interior-power  
DCWH3042/3644, DCWL3342/3944, &  
15 (6.8)  
DCWN3042/3644  
DIV440  
DIV600  
440 CFM interior-power  
600 CFM interior-power  
DCWH3042, DCWL3342, & DCWN3042  
DCWH3644/4244, DCWL3944/4544, &  
DCWN3644/4244  
25 (11.3)  
27 (12.2)  
DIV1200  
DEV900  
1,200 CFM interior-power  
900 CFM exterior-power  
DCWH4844, DCWN5144, & DCWN4844  
DCWH3042/3642/4244, DCWL3342/3944/4544, &  
DCWN3042/3644/4244  
43 (19.4)  
39 (17.6)  
DEV1200  
DEV1500  
1,200 CFM exterior-power  
1,500 CFM exterior-power  
DCWH3042/3644/4244/4844, DCWL3342/3944/  
4544/5144, & DCWN3042/3644/4244/4844  
DCWH4844, DCWL5144, & DCWN4844  
53 (23.9)  
47 (21.3)  
Duct Cover Extensions  
• For use with DCWH, DCWL, & DCWN hoods  
• Extends height of hood by up to 12” (for 10’ ceilings)  
• Replaces adjustable duct cover supplied with hood  
• Specify finish code following accessory model number (for example, DCCE1010-SS)  
• Available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG)  
Model  
Description  
Approx. ship wt. lbs. (kg)  
DCCE1010  
DCCE1210  
DCCE1810  
Duct cover extension (for 30” & 33”W. hoods—10”W. x 12”D. x 30” – 42”H.)  
Duct cover extension (for 30”, 39”, 42”, & 45”W. hoods—12”W. x 12”D. x 28” – 40”H.)  
Duct cover extension (for 48” & 51”W. hoods—18”W. x 12”D. x 28” – 40”H.)  
4 (1.8)  
6 (2.7)  
8 (3.6)  
Backsplashes  
• Stainless Steel (SS)  
• 30”H.  
• Backsplashes protect the wall space below hood  
• Create a continuous finish between cooking surface and hood  
• Low maintenance, easy to clean  
• Hemmed edges with screw holes  
• Kit includes backsplash and fastening screws  
Model  
BKS30  
BKS36  
BKS42  
BKS48  
BKS54  
Description  
Approx. ship wt. lbs. (kg)  
7 (3.2)  
30”W. backsplash  
36”W. backsplash  
42”W. backsplash  
48”W. backsplash  
54”W. backsplash  
9 (4.1  
12 (5.4)  
14 (6.3)  
17 (7.7)  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In Classic Chimney Wall Hood—  
Standard, w/Ledge, & Ledgeless  
Installation Notes & Accessories  
Warming Shelf Panels  
• Stainless Steel (SS)  
• 12”D./12”H.  
• Shelf panels hold cookware and condiments  
• Fold up/down, heavy-duty warming shelves (non-removable), factory installed on stainless steel backsplash  
• 15-7/8”W. X 10-1/8”D.  
• Kit includes shelf (or shelves) and fastening screws  
Model  
WGP30  
WGP36  
WGP42  
WGP48  
WGP54  
Description  
Approx. ship wt. lbs. (kg)  
9 (4.1)  
30”W. warming shelf panels (one shelf)  
36”W. warming shelf panels (two shelves)  
42”W. warming shelf panels (two shelves)  
48”W. warming shelf panels (two shelves)  
54”W. warming shelf panels (two shelves)  
12 (5.4)  
14 (6.3)  
16 (7.2)  
20 (9.0)  
Compliance Information  
WARRANTY SUMMARY*  
• One-year full warranty—complete product  
• Five-year limited warranty—all ventilator motors  
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items  
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.  
Warranty valid on Viking products shipped within the United States and Canada.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 

Targus Network Card APA01AP User Manual
TOA Electronics Stereo Amplifier A 903MK2 User Manual
Topcom Telephone COCOON 300 User Manual
Toshiba Air Conditioner RAS 13UAV E2 User Manual
Toshiba Computer Drive MG03ACA100 User Manual
Tricity Bendix Washer BIW 100 User Manual
Troy Bilt Trimmer TB60AF User Manual
Tyco Network Card DCM 300 User Manual
Vermont Casting Indoor Fireplace DVRT41 User Manual
Viking Oven DEDO127 130 User Manual