Vivitar Camcorder DVR 410 User Manual

DVR 410  
Digital Video Camera  
User’s Manual  
© 2009 Sakar International, Inc. All rights reserved.  
Windows and the Windows logo are registered trademarks of Microsoft Corporation.  
All other trademarks are the property of their respective companies.  
 
Introduction  
Thank you for purchasing the DVR 410 Digital Video Camera. With this camera you can shoot quality Videos  
(AVI) and Photos (JPG).  
This camera requires an SD card (up to 16GB) for normal use. You will not be able to capture videos and  
photos without the SD card inserted.  
Please read this manual carefully before using.  
Key Features  
Digital Video resolution - 640x480pixels (VGA), 320x240pixels (QVGA).  
Digital Photo resolution - 1280 x 1024 pixels (1.3M), 640x480pixels (VGA)  
1.8‟‟ LCD screen  
4 X Digital Zoom  
Built-in microphone and speaker  
NTSC TV out function  
SD memory card up to 16GB is needed in order to capture videos and photos  
Vivitar Experience Image Manager software for uploading and managing photos and videos to or from  
the most popular photo sharing and social network websites  
 
2
   
Camera Maintenance and Care  
Do not wrap the camera in cloth or other materials when operating the camera. Doing so will raise  
the internal temperature and cause overheating hazards.  
Do not attempt to disassemble or alter any part of the equipment not expressly described in this  
manual.  
Avoid using and storing your camera in extremely hot and cold places, as well as humid and dusty  
environments.  
Protect the equipment from strong shocks and impacts.  
Be careful to prevent metal objects or others from contact with any plug/slot of the device.  
Do not try to use the camera during driving.  
When not using the camera for extended periods of time, remove the batteries from the camera.  
What your Camera Includes  
Digital Video Camera  
TV cable  
Strap  
Built-in USB connector  
Vivitar Experience Image Manager software Installation CD  
User`s Manual  
 
3
   
Computer System Requirement for Windows XP  
To be able to download photos and videos to your PC, you will need the following minimum configuration:  
Pentium 4 processor or above with Windows XP service pack 2  
512 MB RAM, with 100MB of free disk space  
1024 x 768 Recommended screen resolution  
16-bit color or higher display adaptor  
CD-ROM Drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Windows Media Player 10 or higher  
Internet connection  
Computer System Requirement for Windows Vista  
To be able to download photos and videos to your PC you will need the following minimum configuration:  
Windows Vista  
800MHz processor and 512 MB of system memory  
20GB hard drive with at least 15GB of available space  
Support for Super VGA graphics  
Available USB Interface  
CD-ROM drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Internet connection  
 
4
   
Computer System Requirements for Macintosh  
Macintosh with Intel processor running Mac OS X v10.4.6 or later  
256 MB RAM, 100 MB free disk space  
Display: 1024 x 768 or higher-resolution monitor  
QuickTime 6 or higher  
Internet connection  
A Quick Look at Your Digital Video Camera  
 
   
 
6
Prepare Your Digital Video Camera for Use  
Battery Installation  
Your Digital Video Camera requires 3 AAA batteries (alkaline batteries are recommended).  
Insert the batteries into your Digital Video Camera as directed below:  
1. Slide the battery cover on the front of the camera in a downward direction to open the cover.  
2. Insert the batteries with the correct polarity (positive pole/negative pole) as appears in the battery  
compartment.  
3. Replace and slide the battery cover up to close.  
Note:  
1. Do not mix old and new batteries.  
2. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium metal hydride) batteries.  
3. If the camera locks or freezes and does not respond to any button, remove and reinstall the batteries.  
 
7
 
Insert SD/MMC Memory Card  
Important: A compatible SD/MMC memory card up to 16GB needs to be inserted into the SD card slot on the  
side of the camera in order to capture videos and photos. After you insert the memory card, all the videos and  
photos you shoot will automatically be stored on the memory card.  
(SD cards are not included and need to be purchased separately).  
Note: Power off the camera before inserting or removing the memory card.  
Please follow these steps to insert the memory card:  
1. Locate the memory card slot on the side of your Digital Video Camera.  
2. Insert the memory card correctly as directed on the side of the camera at the opening of the slot.  
3. Press the memory card until you hear a Clicksound. The memory card when properly inserted will be  
flush with the surface of your camera.  
Note: After you insert the memory card, the card icon will appear on the LCD, indicating that your memory card  
has been installed successfully, and the videos and photos you shoot will be stored on the card.  
 
8
 
Starting Your Digital Video Camera  
Power on  
Press the Power button on the side of the camera to power on the camera.  
The LCD will light up and the Video mode will appear by default indicating that you camera is ready to use to  
capture videos.  
If you have not inserted a compatible SD memory card, a “NO CARD” message will appear in the center of the  
LCD screen. Please insert an SD card in order to continue using the camera.  
Power off  
Press the Power button to power off your camera.  
Auto Power off  
Your camera will automatically power off if idle for 60 seconds or if there is insufficient battery power.  
Change Camera Mode  
Press the Mode button to change between the 3 camera options - Video, Camera and Playback.  
The icon of the selected mode will appear on the LCD.  
 
9
 
Function Buttons on the camera  
Button  
Power  
Function  
Button  
Function  
Power on/off camera  
Up and Down Go to previous or the next  
button  
photos/videos when in playback mode.  
In the Menu mode to select the  
submenu option.  
Menu  
Open  
menus  
of Right and left Zoom in and out in the camera mode  
Camera mode, Video button  
mode and Playback  
mode  
and of the photos in playback mode.  
OK/Shutter Take Photo/ Start or Mode  
stop to record video  
clips. Play and pause  
videos in Playback  
mode  
Shift between Camera, Video and  
Playback modes.  
 
10  
Video Mode  
Shooting Videos  
1. Turn on your Digital Video Camera.  
2. The first mode to appear is the Video mode.  
3. The amount of recording time available for the resolution selected will appear on the LCD screen.  
4. Compose your object with the LCD screen.  
5. Press the OK/Shutter button to start shooting your video. The built-in microphone enables you to  
record your video with sound.  
6. The elapsed time will begin to appear on the bottom right corner of the LCD screen.  
7. Press the OK/Shutter button again to stop shooting and save your video as an AVI video file on the  
memory card.  
8. The amount of time that you can capture videos depends on the size of the SD memory card  
inserted and the video resolution selected.  
Note: The lower the resolution setting the more recording time is available. However videos  
recorded at lower resolution are of less quality than videos recorded at the higher quality.  
Changing the Video settings  
1. Press the Menu button in the Video mode.  
2. The “AVI Option” menu will appear on the LCD with the following options:  
EXIT, RESOLUTION, FREQUENCY, SPEAKER and LANGUAGE  
 
11  
 
Resolution settings  
Your Digital Video Camera supports 2 video resolutions VGA and QVGA.  
1. Press the Menu button in the Video mode.  
2. Press the Up or Down button to select the RESOLUTION option  
3. Press the OK/Shutter button to open the submenu options.  
VGA (640x480), QVGA (320x240)  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the resolution.  
Note: Videos captured in VGA are of a better quality than QVGA videos and therefore take up more of the  
camera`s memory.  
Frequency setting  
Generally speaking, 60HZ is for the countries such as U.S. and 50HZ for countries such as Japan.  
The default setting is 60HZ. Select the frequency setting that best suits your present location  
1. Press the Menu button in the Video mode.  
2. Press the Up or Down button to select the FREQUENCY option  
3. Press the OK/Shutter button to open the submenu options.  
50 Hz, 60 Hz  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the frequency.  
 
12  
Speaker setting  
You can choose to turn the camera`s speaker on or off.  
1. Press the Menu button in the Video mode.  
2. Press the Up or Down button to select the SPEAKER option.  
3. Press the OK/Shutter button to open the submenu options.  
ON, OFF  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the speaker status on or off.  
Language  
You can select the language in which the camera menus will display.  
1. Press the Menu button in the Video mode.  
2. Press the Up or Down button to select the LANGUAGE option  
3. Press the OK/Shutter button to open the language submenu options.  
English, French, Portuguese, Spanish, German and Italian  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the language selected.  
6. All the camera messages and menus will not be displayed in the language selected.  
 
13  
Camera Mode  
Taking Photos:  
1. Turn on your digital video camera.  
2. Press the Mode button to select and enter the Camera mode.  
3. The camera icon will appear on the LCD.  
4. The amount of photos that can be captured with the available memory and as per the selected  
resolution will appear on the bottom right corner of the LCD screen.  
5. Compose your object with the LCD screen.  
6. Press the Right button to Zoom in and the Left button to Zoom out of the object.  
7. Press the OK/Shutter button to capture and save your photo to the memory card.  
Note: The lower the resolution setting the more photos can be taken. However lower resolution  
photos are of less quality than photos taken at higher quality.  
Changing the Camera settings  
1. Press the Menu button in the Camera mode.  
2. The DSC Option” menu will appear on the LCD with the following options:  
EXIT, CAPTURE, RESOLUTION, FREQUENCY, SPEAKER and LANGUAGE  
 
14  
 
Capture settings  
Your Digital Video Camera has 3 photo capture options.  
Select the SINGLE option to capture single shots,  
CONT option to take 3 continuous shots, and  
SELF option to set the camera to the 10 second self-timer option to include yourself in the photo. In  
all instances, clicking the Shutter button will capture the photo(s).  
1. Press the Menu button in the Camera mode.  
2. Press the Up or Down button to select the CAPTURE option  
3. Press the OK/Shutter button to open the submenu options.  
SINGLE, CONT or SELF  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the capture setting.  
6. Press the Shutter button to capture the photo(s).  
Resolution settings  
Your Digital Video Camera supports 2 camera resolutions 1.3M and VGA.  
1. Press the Menu button in the Camera mode.  
 
15  
2. Press the Up or Down button to select the RESOLUTION option  
3. Press the OK/Shutter button to open the submenu options.  
1.3M, VGA  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the resolution.  
Note: Photos taken in 1.3M (1280 x 1024) are of a better quality than VGA (640 x 480) photos and therefore  
take up more of the memory on the SD memory card.  
Frequency setting  
Generally speaking, 60HZ is for the countries such as U.S. and 50HZ for countries such as Japan.  
The default setting is 60HZ. Select the frequency setting that best suits your present location  
1. Press the Menu button in the Camera mode.  
2. Press the Up or Down button to select the FREQUENCY option  
3. Press the OK/Shutter button to open the submenu options.  
50 Hz, 60 Hz  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the frequency.  
 
16  
Speaker setting  
You can choose to turn the camera`s speaker on or off  
1. Press the Menu button in the Camera mode.  
2. Press the Up or Down button to select the SPEAKER option.  
3. Press the OK/Shutter button to open the submenu options.  
ON, OFF  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the speaker status on or off.  
Language  
You can select the language in which the camera menus will display.  
1. Press the Menu button in the Video mode.  
2. Press the Up or Down button to select the LANGUAGE option  
3. Press the OK/Shutter button to open the language submenu options.  
English, French, Portuguese, Spanish, German and Italian  
4. Press the Up or Down button to select the option you wish to choose.  
5. Press the OK button to confirm and save the language selected.  
6. All the camera messages and menus will not be displayed in the language selected.  
 
17  
Playback Mode  
In this mode you can view, playback, delete and/or format the images that you captured with your camera with  
the SD memory card inserted.  
1. Press the Mode button to set the camera to the Playback mode.  
2. The last picture taken or video captured will appear on the LCD screen.  
3. In this mode, you can view all the photos and play the video files taken with the camera and saved to  
the memory card.  
Note: if there are no photos or videos on the SD Card once inserted in the camera a NO FILEmessage will  
appear on the LCD screen on entering this mode.  
View Photos  
If the  
icon and the letters JPG appear on top left of the screen, this means you are viewing a picture.  
1. Press the Up button to view the previous file.  
2. Press the Down button to view the next file.  
3. Press the Right button to zoom into the selected photo.  
4. Press the Left button to zoom back out of the selected photo.  
 
18  
 
Playback Videos  
If the icon  
and the letters AVI appear together on the top left of the screen, this means you are viewing  
the image of a video file.  
1. Press on the OK/Shutter button to playback the current video file with sound.  
2. Press the OK/Shutter button again to pause the video.  
3. Press the Up key to view the previous file.  
4. Press the Down key to view the next file.  
Delete or Format  
You can delete unwanted files or format the SD memory card inserted in the camera from the Playback mode.  
1. In the Playback mode, search and select the AVI video or JPEG photo file you wish to delete by pressing  
the Up or Down buttons.  
2. Press the Menu button.  
3. The DELETE MENU will appear with 4 options:  
EXIT select Exit to close the menu  
FORMAT - Format the SD memory card inserted in your camera  
DELETE ALL- delete all files from the SD memory card in your camera.  
DELETE ONE - delete the current file you selected.  
.
4. Press the Up/Down button to select your choice.  
5. Press the OK/Shutter button.  
 
19  
6. A Confirmation screen will appear with ‟Yes‟ or „Nooptions.  
7. Press the Up/Down button to select the option to wish to perform.  
8. Select „Yes‟, to either delete the photo(s) or format the card. Select „No‟ to cancel without deleting.  
9. Press the OK/Shutter button to execute the command.  
Note:  
The Format option will delete all data on your SD memory card. Videos or Photos that you have not  
downloaded to your computer will be erased forever. Please be sure of your choice before using this  
function.  
TV out function  
Your Digital Video Camera supports an NTSC TV out function.  
This function can only be used on TV sets that support NTSC format.  
You can use the TV screen instead of your Digital Video LCD Screen to view your videos or photos.  
 
20  
 
Please follow the below steps:  
1. Power on your Digital Video Camera.  
2. Turn on your TV.  
3. Ensure that your TV is set to NTSC mode.  
4. Connect your Digital Video Camera to the TV with the special TV cable supplied.  
5. Connect the White cable to the Audio slot and the Yellow cable to the Video slot.  
6. The LCD screen of your Digital Video Camera will now turn off and the image will now appear on the  
TV screen.  
7. To see a video being captured in real time on your TV, point the camera at the object and begin to  
record as described in the Shooting Videos section above.  
8. The image being recorded appears on your TV screen (instead of the camera`s LCD)  
9. You can also use the TV screen instead of your camera screen to playback and view your videos and  
photos.  
Note: Ensure your Digital Video Camera has sufficient battery power before using this function.  
The LCD screen of your Digital Video Camera will be turned off (blank) after you connect it to the TV.  
 
21  
Install the Vivitar Experience Image Manager Software  
Warning: Do not plug your camera into the computer until the software installation is complete.  
1. Insert the installation CD into your CD-ROM drive. The Vivitar Experience Image Manager will begin  
to install.  
2. Please review the license terms.  
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next”  
to continue.  
3. On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the  
program will be installed, and then click “Install”.  
4. Please wait while the application continues the installation process on your computer.  
5. Follow all instructions.  
6. On PC: Click the “Close” button when the installation is complete.  
On Macintosh: Click the “Quit” button when the installation is complete.  
The application automatically opens.  
7. If you closed the application, click on the Vivitar Experience Image Manager desktop icon (PC) or  
from the Programs or Applications menu on your computer to open and run the application.  
 
22  
 
Connect your Camera to the Computer  
1. Push the built-in USB connector out to connect your camera to the USB port of your computer.  
2. Turn the camera on.  
3. The first time you connect the device to the computer you will have to wait a few seconds until the  
computer recognizes the device.  
4. As your camera is a mass storage device “MSDCwill appear on the LCD, indicating that your  
camera is in Mass Storage Mode.  
Get photos and videos from your camera to your computer  
An SD/MMC card needs to be inserted into the camera. Do not disconnect the camera during file transfer.  
Doing so will cancel the transfer of any files on their way to your computer.  
1. Select the “Get Images” button from the Home window.  
 
23  
   
2. The “Get media from device” window opens.  
3. You can select to download photos, videos or both.  
4. Select your camera (removable disk) from the device window. If your camera is the only USB device  
connected then it will be selected automatically.  
5. Select a location on the computer where to place the new photo and video files.  
 
24  
6. Add the new photo and video files to albums if desired.  
7. Select to remove the media files from the selected device (removable disk) after the import.  
8. Click the “Get media” button to transfer the photos and videos from your camcorder to your  
computer.  
A media download progress bar appears on the bottom left showing the number of media files  
downloading to your computer. A message appears when the download is complete.  
9. The photo and video files that you selected are now downloaded to your computer to the selected  
folder and albums ready for your use.  
Get started!  
Using the Vivitar Experience Image Manager you can:  
Organize your images by creating offline and online albums.  
When connected to the internet you can upload and manage photos and videos to and from the  
most popular photo sharing and social networking sites - Facebook, Flickr, MySpace, Picasa  
YouTube and Photobucket.  
Seamlessly transfer photos and videos from one social network to another.  
Edit images using automatic and manual tools.  
Use automatic “Geotagging” with built in Google Maps.  
For more details on how to use the Vivitar Experience Image Manager open the Help file or click  
the “Take the Tour” button on the application`s Home page.  
 
25  
 
Transfer media from my camera to my computer manually (Using Windows)  
1. Use the USB built-in connector on your camera to connect your camera to the USB port on your  
computer.  
2. MSDCwill appear on the LCD, indicating that your camera is in Mass Storage Mode.  
3. A window appears with a list of options, select Open folder to view files and click OK.  
4. Open the DCIM folder and the folder inside to view the media files.  
5. Select the media and copy the files from this folder into your computer. Optionally, select the files  
and choose Copy from the Edit menu. Then select a folder and choose Paste from the Edit menu.  
6. We recommend that you copy the images into the Pictures/My Pictures folder and the videos into  
the Videos/My Videos folder.  
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way  
to your computer.  
Transfer media from my camera to my computer manually (Using Macintosh)  
1. Use the USB built-in connector on your camera to connect your camera to the USB port on your  
computer.  
2. MSDCwill appear on the LCD, indicating that your camera is in Mass Storage Mode.  
3. The camera‟s device icon appears on the desktop.  
4. Click on the device icon and open the DCIM folder and the folder inside to view the media files.  
5. Select the files and drag them into your computer. Optionally, select the files and choose Copy from  
 
26  
   
the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit menu.  
6. We recommend that you copy the images into the Pictures folder and the videos into the Movies  
folder.  
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way  
to your computer.  
Note: After you connect your camera to your computer, the camera will remain on all the while it is plugged  
into the USB and it wont be switched off. On disconnecting the USB connector the camera will automatically  
switch off.  
Sakar Warranty Card  
This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to  
function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be  
repaired at no charge for parts or labor for a period of one year.  
What Is Not Covered By Warranty:  
Damages or malfunctions not resulting from defects in material or workmanship and damages or  
malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering,  
modification or accident.  
 
27  
 
What To Do When Service Is Required:  
When returning your defective product (postage pre-paid) for service, your package should include:  
1. Copy of original bill of sale  
2. A detailed written description of the problem.  
3. Your return address and telephone number (Daytime)  
MAIL TO ADDRESS BELOW:  
In the US:  
In the UK:  
Sakar International  
Attention: Service Department  
195 Carter Drive  
Sakar / Vivitar  
2D, Siskin Parkway East  
4020 Middlemarch Business Park  
Coventry, CV3 4PE  
Edison, NJ 08817  
Technical Support  
For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and  
FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at [email protected] and one of our  
technical support team members will answer your questions. For phone support in the US please call  
1-800-592-9541, in the UK call 0800 917 4831. If you would like to call from anywhere else, please visit  
www.vivitar.com for your local toll free number.  
 
28  
 
Technical Specifications  
Product type  
Digital Video Camera  
Digital Video resolution  
Digital Photo resolution  
Image Sensor  
640*480 pixels ( 30fps) / 320*240 pixels( 30fps )  
1280*1024 pixels / 640*480 pixels  
CMOS Sensor  
LCD Display  
1.8TFT  
Color  
24 bit RGB  
Shutter Speed  
1/8 sec to 1/5000 sec  
Internal memory  
None  
SD/MMC card (up to 16GB) needs to be inserted to  
External memory  
use the camera  
F=2.4 f=3.0mm,  
50Hz / 60 Hz  
10 seconds  
4 x  
Lens  
Frequency  
Self Timer  
Digital Zoom  
White Balance / Exposure  
Speaker  
Auto  
Built-in  
File Format  
TV out  
AVI and JPEG  
NTSC  
 
29  
 
Power saving  
60 seconds  
Battery  
3 AAA batteries (1.5V)  
Transmission interface  
Working temperature  
Computer system  
USB 1.1  
0~40  
Window XP/Vista/Mac OS X (10.4.6 or higher)  
Troubleshooting  
The Camera does not Power on.  
1. The Batteries are inserted in the wrong direction.  
Reload the batteries in the correct direction.  
2. The Batteries have insufficient power to power on.  
Replace the batteries.  
The camera does not take pictures.  
1. The Memory is full.  
Download the images to your computer and  
then delete all the images on the SD Card.  
Insert a new memory card.  
2. The Memory card is not formatted correctly.  
Format the memory card again or use a new  
card.  
 
30  
 
Image is blurry or out of focus.  
1. The camera was moving when the image was  
captured.  
Hold the camera steady when shooting.  
Images were deleted by mistake. Can I retrieve them  
1. Images were deleted by mistake and have  
All deleted images can be found and retrieved  
been removed from where they were located on from the Recycle or Trash Bin.  
the computer.  
Recorded images are not saved in memory.  
1. The camera was turned off before the images  
were saved to memory.  
If the battery low indicator appears on the LCD  
monitor, replace the batteries immediately.  
A00-091016GES  
 
31  

Tiger Products Co Ltd Rice Cooker JAG B10G User Manual
Topcom Network Router BR 604 User Manual
Toshiba Flat Panel Television P42LHA User Manual
Toshiba Network Card CD332 User Manual
Tunturi Treadmill T60F User Manual
Uniden Cordless Telephone DXI4560 User Manual
Vantec Personal Computer NST 260U2 RD User Manual
Vantec Range NST 260U2 BK User Manual
Viking Cooktop F21213 User Manual
Vivitar Camcorder DVR 1020HD User Manual