Vivitar Camera Lens VIV 2X4 User Manual

Four Element 2x Tele Converter  
INSTRUCTION MANUAL  
 
VIV-2x4  
WHAT TO DO WHEN SERVICE IS NEEDED  
STEP 1. Package the product and relevant accessories carefully, using ample padding materials and a sturdy  
mailing container to prevent damage in transit.  
STEP 2. Include in package:  
a) Evidence of date and place of original purchase (for example, a copy of your sales receipt).  
b) Detailed description of your problem.  
c) When possible, a sample evidencing the problem.  
STEP 3. Return item (insured) to: (in the U.S.):  
Vivitar  
(in the U.K.)  
Sakar UK  
2D Siskin Parkway East  
CV3 4PE, UK  
Attn: Technical Support  
195 Carter Drive  
Edison NJ 08817  
When service is complete, the product will be returned to you shipping prepaid. In the event the product is  
deemed to be not faulty or the defect is a result in wear and tear, Vivitar may levy a handling charge for the  
return ofthe product. This warranty gives you speciꢀc legal rights. You may also have other rights which vary  
TECHNICAL SUPPORT  
at the website. Can’t ꢀnd what you are looking for? E-mail us at [email protected] and one of our technical  
support team members will answer your questions. For phone support in the US please call 1-800-592-9541, in the  
free number.  
-2-  
 
Mounting and Dismounting  
1. Mount the TELE CONVERTER onto the back of the lens ꢀrst. To mount the TELE CONVERTER,  
align the red mark on the front side of the TELE CONVERTER with the lens’s red dot, then turn the  
TELE CONVERTER clockwise or counterclockwise (NIKON) until it stops.  
2. To mount the TELE CONVERTER with the lens onto the camera, align the red mark on the rear  
side of the TELE CONVERTER with the camera’s red dot and turn the TELE CONVERTER clockwise  
or counterclockwise (NIKON) until it stops.  
3. To dismount the TELE CONVERTER with lens from the camera, turn the TELE CONVERTER  
clockwise (NIKON) or counterclockwise while pushing down the lens release button on the  
camera.  
4. To dismount the lens from the TELE CONVERTER, turn the lens clockwise (NIKON) or counter-  
clockwise while pushing down the lens release button of the TELE CONVERTER.  
-3-  
 
AF Compatibility  
Check the maximum aperture (F Value) of your prime lens to ensure that the TELE CONVERTER  
will operate in AF mode. If the lens is slower than the required F value (as speciꢀed below), the  
lens/ TELE CONVERTER combination will operate in the MF mode.  
For Nikon:  
This converter can be used with AF lens and AF-S lens both.  
For Canon:  
This converter can not be attached to FF-S lens of CANON EOS.  
For SONY-Alpha:  
For SSM lens (built in motor lens) of SONY-a, use in MF mode.  
For PENTAX:  
For SDM lens (built in motor lens) of PENTAX, use in MF mode.  
-4-  
 
Specifications  
Magniꢀcation: 2X  
Optical Construction: 4 Elements in 4 Groups  
Maximum Aperture of Lens to Ensure AF Operation: F/3.5 or Faster  
Coating: Multi-Coating  
Exposure Magniꢀcation: Approximately 4 times  
(equivalent to)  
(2 Diaphragm)  
Depth of Field: 1/2 of Prime Lens  
-5-  
 
 
 

TDK Stereo System ANT8030 2R4 User Manual
Teledex Cordless Telephone DCT2800 Series User Manual
Telenetics Network Card 144 User Manual
Toshiba Cordless Telephone FT 8001 A User Manual
Trane Air Conditioner CG PRC007 EN User Manual
Turbo Chef Technologies Convection Oven TD030208 User Manual
Vantec Range 355UF User Manual
Victor Technology Calculator 1230 3 User Manual
Warwick Telephone Voice Mail System User Manual
Weber Gas Grill 56209 User Manual