Vizio SONAR VSB201 User Manual

MODEL  
VSB201  
VIZIO  
QUICK  
START  
GUIDE  
 
PACKAGE CONTENTS  
Remote Control  
with Battery  
High Definition Sound Bar  
Power Adapter w/Cable  
This Quick Start Guide  
Stereo RCA to 3.5mm  
Audio Cable  
Cables may vary slightly from those shown.  
 
CONTROLS & CONNECTIONS  
Input  
Volume + / -  
Press to increase/  
decrease system  
volume.  
Mute  
SRS ON  
Press to turn SRS  
WOW HD on or off.  
Press to change  
input source  
(Input 1, Input 2).  
Press to turn sound  
off. Press again to  
turn sound on.  
Power  
Press to turn  
Sound Bar  
on or off.  
SRS OFF  
Press to turn SRS  
SRS WOW HD on  
or off.  
Mute  
ON  
OFF  
Input  
Vol -  
Vol +  
Input  
2
Input  
1
Sub Out  
24V  
Input 2  
Input 1  
Sub Out  
24V  
Subwoofer Out (RCA)  
Input 2  
Power Port  
(Stereo 3.5mm)  
Input 1  
(Stereo RCA)  
 
FIRST-TIME SETUP  
1
Input 2  
Input 1  
Sub Out  
24V  
BACK OF SOUND BAR  
CHOOSE ONE  
Connect the included Stereo RCA Cable  
to ONE TV audio output as shown. The  
cable is reversible. You can connect to  
either a 3.5mm port or an RCA port  
on your TV.  
AUDIO OUT  
AUDIO OUT  
BACK OF YOUR TV*  
 
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.  
2
24V  
Input  
2
Input  
1
Sub Out  
24V  
3
4
 
5
Sound Bar is  
centered below the  
TV.  
For the best surround sound experience, position the Sound Bar as shown.*  
The Sound Bar should be close to ear level.  
 
6
Gently pull the plastic tab from the back  
of the remote control. (The plastic tab  
can be thrown away.)  
7
Turn your TV on, then press the Power button on  
the remote to turn the Sound Bar on.  
Power  
Input  
Press the Input button to switch between the  
Input 1 and Input 2 audio sources. For example,  
if you connected your TV to Input 1, set the  
Sound Bar to Input 1.  
Setup is complete.  
 
USING THE REMOTE  
Power  
Volume Up  
Press to turn on or off.  
Press to increase volume.  
Input  
Volume Down  
Press to change input source.  
Press to decrease volume.  
Mute  
Press to mute/unmute.  
SUB +  
SRS On/Off  
Press to increase subwoofer volume.  
Press to turn SRS WOW HD on.  
SUB -  
When SRS WOW HD is activated, the  
orange light on the front of the Sound Bar  
is on.  
Press to decrease subwoofer volume.  
SRS WOW HD improves audio  
performance by expanding the audio  
image, resulting in deep, rich bass and  
added clarity.  
TIP: When using the remote, point it at the  
right side of the Sound Bar. The sensor is  
located there.  
If your remote stops responding, you may need  
to replace the battery.  
To replace the battery, open the battery  
compartment as shown, then replace the old  
+
battery with a new CR2025. Be sure that the  
sign on the battery is facing up.  
 
WALL MOUNTING THE SOUND BAR  
1
Remove the screw from the Sound  
Bar stands and rotate as shown.  
26 3/4”  
(67.95 cm)  
Be sure your screws are attached  
to wood studs or drywall anchors  
(for drywall) or concrete anchors  
(for brick/concrete walls). Wall  
mounting hardware is not included.  
2
If you are unfamiliar with power tools or the layout of electrical wiring in  
the walls of your home, consult a professional installer.  
Reattach stands using the  
included screw.  
 
Mounting hardware not included.  
HELP & TROUBLESHOOTING  
All VIZIO products include FREE lifetime technical support.  
The VIZIO support team is highly trained and is based in the United States.  
We can help with:  
• Product Setup  
• Technical Problems  
• Warranty Questions  
• And More  
Hours of operation:  
Monday - Friday: 5 AM TO 9 PM (PST)  
Saturday - Sunday: 8 AM TO 4 PM (PST)  
Phone: (877) 698-4946 (TOLL-FREE)  
Web:  
• Press the POWER button on the remote control or on the top of your Sound Bar.  
• Ensure the power cord is securely connected.  
There is no power.  
• Ensure the light on the power adapter is glowing green.  
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.  
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.  
• Press MUTE on the remote to ensure the Sound Bar is not muted.  
There is no sound.  
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.  
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or  
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.  
• Ensure all cables and wires are securely connected.  
I hear buzzing or  
humming.  
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not,  
the problem may be with the original device.  
• Connect your device to a different input on the Sound Bar.  
 
VIZIO RECOMMENDS  
ULTIMATE ENTERTAINMENT  
Complete your home theater experience! The VIZIO 3D Blu-ray Player with Wireless Internet Apps delivers full  
HD video, 7.1 surround sound and has built-in wireless for easy access to online movies, TV, music and more.  
Exceptional Full HD 1080p performance  
Streams movies, music, and more with VIZIO Wireless Internet Apps  
Watch 3D movies or HD  
 
AVAILABLE ON VIZIO.COM  
THE SIMPLE SOLUTION  
Replace up to three remotes with the VIZIO 3 Device Universal  
Remote Control. It uses a clever code search mode to find your  
device without any manual setup. It’s also fully backlit to help you  
find the right buttons in the dark.  
Compatible with 500 Brands  
Compatible with 2500 Devices  
Controls up to 3 devices at once  
 
ONE-YEAR LIMITED WARRANTY  
ON PARTS AND LABOR  
Covers units purchased as new in United States and Puerto Rico Only  
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of  
commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.  
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through Friday and  
purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.  
Parts and Labor  
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products  
are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.  
Type of Service  
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the  
customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.  
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide  
instructions for packing and shipping the covered Product to the VIZIO service center.  
Limitations and Exclusions  
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper  
voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs  
attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited  
warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-  
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL  
LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE  
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR  
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG  
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY  
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.  
SPECIFICATIONS  
Sound Bar: Four 3” High-Efficiency Full-Range  
Transducers  
Frequency Response (Sound Bar): 80 Hz - 20 KHz  
Voltage: 100-240 VAC, 50-60 Hz  
Inputs: 1 x RCA Stereo Audio  
1 x 3.5mm Stereo Audio  
Output: 1 x Subwoofer Out  
Dimensions (Sound Bar): 39.75” W x 4.82” H x 4.33” D  
Net Weight (Sound Bar): 11.68 lbs  
Compliances: UL, FCC  
Sound Pressure Level: 100 dB  
 
LEGAL & COMPLIANCE  
FCC Class B Radio Interference Statement  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
4. Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
Notice:  
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such  
interference.  
RF Exposure Information  
This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency  
(RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.  
IC Statement  
Operation is subject to the following two conditions:  
1. This device may not cause interference, and  
2. This device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
IC Radiation Exposure Statement  
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance  
20cm between the radiator & your body.  
Disposal and Recycling  
You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of  
separately from household waste. Contact local authorities to learn about disposal and recycling options.  
Incorporated under license from SRS Labs, Inc.  
SRS WOW HD is a trademark of SRS Labs, Inc.  
 
© 2012 VIZIO INC. ALL RIGHTS RESERVED.  
120110ST-A  
 

Technics Universal Remote EUR643809 User Manual
Telex Headphones PH 45 User Manual
Toro Sprinkler TR50XT SERIES ROTOR User Manual
Toshiba CRT Television 13A25 User Manual
Toshiba Telephone Strata DK User Manual
Traulsen Refrigerator TR35761 User Manual
Tricity Bendix Cooktop SIE514 User Manual
Tunturi Home Gym R60 User Manual
ViewSonic Computer Monitor VX2453MH LED User Manual
Vulcan Hart Food Warmer VCW1 User Manual