READ AND SAVE THESE INSTRUCTIONS
Whole Room Heater Owner’s Guide
LEER Y GUARDAR ESTAS INSTRUCCIONES
Guía del propietario el calentador para ambientes
model MVH
Contents
Important Instructions ........................................................................4
Vornado Vortex Action .......................................................................6
Controls...............................................................................................7
How To Use
Getting Started...............................................................................8
Resetting Your Vornado Heater......................................................8
Advanced Safety Features..................................................................9
Cleaning and Storage
How To Clean..................................................................................9
Storage............................................................................................9
Troubleshooting ...............................................................................10
Operating Tips..................................................................................11
Warranty............................................................................................12
Product Specifications ......................................................................23
Español p. 13
English
3
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
Please visually inspect all internal and external components before
connecting to electric current. If any damage is found, DO NOT
USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
† This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub, shower, swimming pool or other water container.
† Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
† To disconnect heater, turn controls to off, then remove plug from
outlet.
† Read all instructions before using this heater.
† This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Use handles when moving this heater. Keep
combustible materials, such as furniture, pillows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from the front of the
heater and keep them away from the sides and rear.
† This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance. Extreme caution
is necessary when any heater is used by or near children or invalids
and whenever the heater is left operating and unattended.
† Always unplug heater when not in use.
† Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
† To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings
may become blocked.
† A heater has hot and arcing or sparking parts inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used or
stored.
† Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock,
or injury to persons.
† Always plug heaters directly into a wall outlet/receptacle. Never
use with an extension cord or relocatable power tap (outlet/power
strip). Operate this heater only in its upright position.
† Do not operate this heater on an elevated surface such as a shelf
or desktop. Use only while placed on the floor.
† Do not operate any heater with a damaged cord or plug or after
the heater malfunctions, has been dropped or damaged in any
manner. Discard heater, or return to authorized service facility for
examination and/or repair in order to avoid a hazard.
† This heater is equipped with a thermal safety shut-off system,
designed to turn off the heater when an internal overheating
† Do not use outdoors.
4
English
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
condition is detected (see How To Use “RESETTING YOUR of the product. Contact a qualified electrician to replace loose or
VORNADO HEATER,” to determine how to check and
reset the heater).
worn outlet.
† This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
† Do not use this heater on a circuit that has a variable speed device
operating, such as a blender or a variable speed fan.
† Do not use heater to dry human or animal hair/fur or articles of
clothing.
† CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cutout, this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
† Do not use this heater in an RV, a boat, or in any application where a
DC/AC converter is converting battery power to AC power.
† Do not use the heater on any Ground-Fault Circuit Interrupted
(GFCI) circuit. A GFCI circuit has a reset button in the middle of the
outlet.
† Do not use this heater on a surge protected circuit.
† Do not use the heater with any kind of timer to turn the unit on or
off.
† Do not use this heater on a circuit that is shared with a high power
device, such as a vacuum or a circular saw.
† CAUTION: A loose fit between the outlet (receptacle) and plug
may cause overheating and distortion of the plug. Discontinue use
SAVE THESE INSTRUCTIONS
English
5
Trust.
®
Vornado Vortex Action
It is said that trust isn’t given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado’s promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
Andover, Kansas headquarters – thank you for selecting Vornado.
Ordinary Heater
Without Adequate
Heat Circulation
Vornado Whole
Room Heater
With Signature
Vortex Heat
Circulation
82º
82º
82º
72º
Sincerely,
Bill Phillips
CEO, Vornado Air
72º
72º
62º
Ordinary heaters provide only localized heat.
Heat immediately rises to the ceiling, resulting in
cold and hot spots in the room. Vornado’s unique
Vortex Action delivers continuous, uniform heat
surrounding everyone in the room in a warm,
comfortable temperature.
6
English
Controls
Power On/Off
Front light illuminates when power is on.
1
2
Heat
High Heat (III) (1500 watts), Medium Heat (II) (1125 watts) or Low
Heat (I) (750 watts).
3
Thermostat
Selectable heat settings
3
2
1
English
7
How To Use
Getting Started
Resetting Your Vornado Heater
Using your Vornado Heater is easy. Just follow these simple steps.
1. Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that is
representative of the room temperature. The unique side-angled air
inlets allow the heater to be placed closer to walls than possible with most
ordinary heaters (but do not place close to combustibles). Avoid areas of
temperature extremes such as cold drafts and heat registers (refer
to IMPORTANT INSTRUCTIONS for safe placement).
2. Plug power cord into a standard wall outlet.
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur when
the inlets or outlet are blocked, a foreign object prevents the
blade from turning, or the appliance tips over. If this happens,
the safety shut-off system will cut power to the heat element
and you will need to manually reset the heater.
1. Turn the Power switch Off and unplug the unit.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing the unit to cool down.
4. Plug in the unit and place in desired position.
5. Turn the Power switch On. Your Vornado Heater should now
function normally.
3. Press the Power switch On.
4. Select Low, Medium or High heat.
5. Set thermostat to the highest setting. When the room reaches
the desired comfort level, turn the thermostat knob slowly
counterclockwise until the heat cycles off.
Note: If the safety shut-off system repeatedly shuts off
your heater or if it will not reset after following the above
procedure, DO NOT ATTEMPT TO DISASSEMBLE THE
UNIT. Call Vornado Consumer Services Department toll-free
at 1-800-234-0604.
8
English
Advanced Safety Features
Cleaning and Storage
How to Clean
Tight Grill Spirals
† Your heater has no user serviceable parts. Do not disassemble the unit.
This will void your warranty. If service is required, return your heater to
Vornado (see WARRANTY for instructions).
Resists curious fingers.
† The motor is permanently lubricated and requires no oiling.
Cool Touch Case
Safe to touch, even on high heat setting.
Because your heater moves a substantial
amount of air, it will need regular cleaning.
To clean follow these simple instructions:
1. Unplug the unit.
Note: Do not use gasoline, thinners, sol-
vents or other chemicals for cleaning.
2. Use the brush attachment on your
household vacuum cleaner to vacuum
any accumulated dust off the Front Grill
Automatic Safety Shut Off System
If airflow becomes blocked, power to the heating
element is shut off to prevent overheating.
View how to clean your
Vornado heater on your
mobile device.
and Air Inlets. Wipe down the entire surface with a soft cloth.
Note: Vacuuming the outside of the heater is recommended on a bi-
weekly basis. You may also blow the heater out with high pressured air.
This can be purchased from your local hardware store.
Automatic Tip-Over Protection
If tipped more than 10 degrees in any direction, heat
and fan functions immediately shut down.
Storage
Ideal 120°F Exit Air Temperature
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
Warm enough to heat an entire room.
1. Unplug power cord and bundle loosely.
2. Thoroughly clean your heater (see HOW TO CLEAN for instructions).
3. Cover, or place back in retail carton if available. This will prevent the
unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
English
9
Troubleshooting
Problem
Possible Cause and Solution
Unit fails to power on.
Unit is not plugged in. Plug Power Cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker /
ground fault interrupter, or replace fuse (See OPERATING TIPS).
The unit has overheated. Automatic Safety Shut-Off has initiated (See RESETTING YOUR VORNADO HEATER).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Ensure unit is set to High Heat and thermostat is set to highest Temperature setting.
Close all doors and windows to trap heat.
Unit is not producing
sufficient amount of heat.
Allow the unit to fully circulate the heat throughout the room, may take several minutes.
Unit power on but there
is no heat.
Power off and unplug the unit. On the bottom of the unit, there is a black disk. Push in 4-5 times ensuring it
is not stuck. Set unit down on flat surface. Be sure power cord is not under unit. Plug unit in and power on.
Turn to highest heat setting.
10 English
Operating Tips
† To properly carry the heater, place one hand on the back opening
and use your other hand to hold from the front.
† In smaller areas, you might prefer to set the unit in Low mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
† In larger spaces, you might prefer to set the unit in High mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
† The MVH, like any other 1500-watt electric heater, draws up to
12.5 amps of electric current. If using your MVH on High setting
causes your home circuit breaker or fuse to trip, we offer the
following suggestions:
† Try turning off other electrical appliances that run on the same
circuit as your heater.
† Run your heater in Low mode.
† Have your electrician add an additional circuit to your home’s
electrical system.
† When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the MVH.
When the unit is first turned on there is a slight delay before heat
will start to be produced.
† ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY
ELECTRICAL APPLIANCE.
† Do not use more than one heater at a time.
† Never ignore or take lightly the signs of an electrical problem, such
as:
† Warm outlet cover plates
† Sparking at outlet when plugging in or during operation
† Light flickering or dimming (indicates a shared circuit or problem)
Investigate the cause of these before continuing to use the heater.
English
11
Whole Room Heater • 5 Year Limited Warranty
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this
Vornado Whole Room Heater (“Product”) is free from defects in material or workman-
or include your Product’s model number and serial number, as well as your name, address,
city, state, zip code and phone number when contacting Vornado for warranty service.
®
ship for a period of five (5) years from the date of purchase, depending on model. If any
such defect is discovered within the warranty period, Vornado, at its discretion, will repair
or replace the Product at no cost. Repairs not covered by the warranty or outside the war-
ranty period will require a fee to cover the cost of materials, labor, handling and shipping.
After receiving the RA form, ship your Product to:
Vornado Air LLC
Attn: Warranty & Repair
415 East 13th Street
Andover, KS 67002
This warranty does not apply to defects resulting from abuse of the Product, modification,
alteration, repair or service of the Product by anyone other than Vornado, mishandling,
improper maintenance, commercial use of the Product, damages which occur in shipment
or are attributed to acts of God.
For your convenience, please have your model number and serial number when contact-
ing Vornado with service inquiries. To assure proper handling, packages must be clearly
marked with the RA number. Packages not clearly marked with the RA number may be
refused at the receiving dock.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLU-
SIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURA-
TION OF THIS WARRANTY.
Please allow 1-2 weeks for repair and return of your Product after the Product is received.
For your records: Staple or attach your original sales receipt to this Owner’s Guide. Please
also write your products’s serial number below (located on product specs decal).
Serial No. ______________________________________
© 2012 Vornado Air LLC Andover, KS 67002
Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, or allow limitations on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights, and you
may have other rights that vary from state to state.
Specifications subject to change without notice.
®
Vornado is a trademark owned by Vornado Air LLC.
Designed, engineered and supported in the U.S.A.
Manufactured in China.
For warranty or repair service, call 1-800-234-0604 or email
[email protected] to obtain a Return Authorization (“RA”) form. Please have
12 English
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
CL3-0367 R-
CL7-0367 R-, V00
|