Instructions for Toshiba G9 ETB006Z option card
Terminal Assignment
ETB006Z
AC1
G9
F
AC2
R
AC3
AC4
AC5
AC6
S1
S2
S3
RES
ST
AC7
Instructions:
1.- Disconnect the ST to CC jumper on the standard terminal strip.
2.- Connect the ETB006Z card to the ASD as follow.
3.- Set jumper J100 to Source position.
4. – Provide 120V to the terminals of the ETB006Z card by using N as a neutral.
5.- Remember to provide 120V to AC7 since correspond to ST.
|